incorrect node identification

[FugginOld]

Hello...2 of my nvmes on the motherboard m2 slots are reporting different node values than the node values in the unraid app:

In the app, they show as this:

As result, in the disk location app, it is not correctly identifying their cache assignment. Please advise...

[olehj]

Does Force SMART+DB make a difference?

[FugginOld]

No. It only detects 2 of 3 of my Lexar NM800 NVMEs. 2 are 2TB (detected, wrong node value), 1 is 1TB (not detected at all)  On Wednesday, December 31, 2025 at 11:03:57 PM EST, Ole-Henrik J. ***@***.***> wrote: olehj left a comment (olehj/disklocation#485) Does Force SMART+DB make a difference? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

[olehj]

No.
It only detects 2 of 3 of my Lexar NM800 NVMEs. 2 are 2TB (detected, wrong node value), 1 is 1TB (not detected at all) 
On Wednesday, December 31, 2025 at 11:03:57 PM EST, Ole-Henrik J. @.***> wrote:

olehj left a comment (olehj/disklocation#485)
Does Force SMART+DB make a difference?

—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: @.***>

I would need the debug file for this, found under System.

[FugginOld]

Please see attached. On Friday, January 2, 2026 at 07:08:28 AM EST, Ole-Henrik J. ***@***.***> wrote: olehj left a comment (olehj/disklocation#485) No. It only detects 2 of 3 of my Lexar NM800 NVMEs. 2 are 2TB (detected, wrong node value), 1 is 1TB (not detected at all)  On Wednesday, December 31, 2025 at 11:03:57 PM EST, Ole-Henrik J. @.***> wrote: olehj left a comment (olehj/disklocation#485) Does Force SMART+DB make a difference? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***> I would need the debug file for this, found under System. — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

[olehj]

Please see attached.
On Friday, January 2, 2026 at 07:08:28 AM EST, Ole-Henrik J. @.***> wrote:

olehj left a comment (olehj/disklocation#485)

No.
It only detects 2 of 3 of my Lexar NM800 NVMEs. 2 are 2TB (detected, wrong node value), 1 is 1TB (not detected at all) 
On Wednesday, December 31, 2025 at 11:03:57 PM EST, Ole-Henrik J. @.***> wrote:

olehj left a comment (olehj/disklocation#485)
Does Force SMART+DB make a difference?

—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: @.***>

I would need the debug file for this, found under System.

—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: @.***>

I don't receive attachments via GitHub. Either post it directly here, or send it to me in PM on Unraid Forums: https://forums.unraid.net/profile/86216-flamongole/

[FugginOld]

disklocation-2026-01-08.log

[olehj]

@FugginOld sorry for the long delay, but I haven't had time to look at it until now.

According to my findings, these drives has been earlier marked as "removed". Are they by any chance listed under "History" under "Tray Allocations"? If this is the list you refer to, then that might be correct. If this is what it displays under "Information", then proceed:

If they are listed wrong under "Information", can you try to delete (-) the two devices in that history list before running "SMART+DB" again? (It won't really remove it from the DB, but re-flag it and then process it again).

Devices marked as removed:
[devicenode] => sdf
[model_name] => TOSHIBA MG07SCA14TE
[smart_serialnumber] => *FJ7G

[devicenode] => nvme4n1
[model_name] => Lexar SSD NM800PRO 2TB
[smart_serialnumber] => ...8P300B

[devicenode] => nvme5n1
[model_name] => Lexar SSD NM800PRO 2TB
[smart_serialnumber] => ...2P300B

If this is not helping either, you might need to reset "devices" under "System" tab. Yes, it will delete comments and some dates (not those stored in Unraid itself). Create a backup before your reset it in case it doesn't solve anything.