Nickserv resetpass missing

[legendskyk]

Description

user nickname resetpass missing

Steps to reproduce the issue

Hello, how to enabled resetpass module in anope service to make work /ns resetpass nickname for user password to reset?

Describe the results you received

Hello, how to enabled resetpass module in anope service to make work /ns resetpass nickname for user password to reset?

Describe the results you expected

Hello, how to enabled resetpass module in anope service to make work /ns resetpass nickname for user password to reset?

Anope version

anope-2.1.10

[sadiepowell]

Its not enough to just load the module. You need to configure a command to go with it. This is why we recommend that people use our example configs and only tweak them for their needs because this is set up by default in our example configs.

2.0: https://github.com/anope/anope/blob/2.0/data/nickserv.example.conf#L514-L522

2.1: https://github.com/anope/anope/blob/2.1/data/nickserv.example.conf#L522-L530

[legendskyk]

/*
 * Example configuration file for NickServ.
 */

/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the NickServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the nickserv module too.
	 */
	nick = "NickServ"

	/*
	 * The username of the NickServ client.
	 */
	user = "services"

	/*
	 * The hostname of the NickServ client.
	 */
	host = "NickServ.services.xxxx.com"

	/*
	 * The realname of the NickServ client.
	 */
	gecos = "Nickname Registration Service"

	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"

	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
	channels = "#opers"

	/*
	 * The server alias that can be used to securely message this service. If
	 * your IRC server does not have an alias for this service you can set this
	 * to an empty string to tell users to use /msg instead.
	 *
	 * This setting is ignored when options:servicealias is disabled.
	 *
	 * Defaults to the nick of the service if not set.
	 */
	alias = "NS"
}

/*
 * Core NickServ module.
 *
 * Provides essential functionality for NickServ.
 */
module
{
	name = "nickserv"

	/*
	 * The name of the client that should be NickServ.
	 */
	client = "NickServ"

	/*
	 * Requires users to give an email address when they register a nick.
	 *
	 * This directive defaults to "yes" and is recommended to be enabled.
	 */
	forceemail = yes

	/*
	 * Require users who change their email address to confirm they
	 * own their new email.
	 */
	confirmemailchanges = yes

	/*
	 * A message sent to users on connect if they use an unregistered nick. %n will be replaced with the user's nickname.
	 *
	 * This directive is optional.
	 */
	unregistered_notice = "Your nickname is not registered. To register it, use: /msg NickServ REGISTER password email"

	/*
	 * The default options for newly registered nicks. Note that changing these options
	 * will have no effect on nicks which are already registered. The list must be separated
	 * by spaces.
	 *
	 * The options are:
	 * -   killprotect: Kill nick if not identified within 60 seconds
	 * -    kill_quick: Kill nick if not identified within 20 seconds, this one overrides the killprotect
	 *                    option and the killprotect option must be specified with this one
	 * -    kill_immed: Kill nick immediately if not identified, this one overrides both the killprotect
	 *                    and kill_quick options and the killprotect option must be specified with this one
	 * -    ns_private: Hide the nick from NickServ's LIST command
	 * -    hide_email: Hide the nick's email address from NickServ's INFO command
	 * -     hide_mask: Hide the nick's last or current user@host from NickServ's INFO command
	 * -   hide_status: Hide the nick's services operator access status from NickServ's INFO command
	 * -     hide_quit: Hide the nick's last quit message from NickServ's INFO command
	 * -   memo_signon: Notify user if they have a new memo when they sign into the nick
	 * -  memo_receive: Notify user if they have a new memo as soon as it's received
	 * -     memo_mail: Notify user if they have a new memo by mail
	 * -        autoop: User will be automatically opped in channels they enter and have access to
	 * -       neverop: User can not be added to access lists
	 * -           msg: Messages will be sent as PRIVMSGs instead of NOTICEs
	 * - ns_keep_modes: Enables keepmodes, which retains user modes across sessions
	 *
	 * This directive is optional, if left blank, the options will default to memo_signon, and
	 * memo_receive. If you really want no defaults, use "none" by itself as the option.
	 */
	defaults = "killprotect ns_private hide_email hide_mask memo_signon memo_receive autoop"

	/*
	 * The minimum length of time between consecutive uses of NickServ's REGISTER command. This
	 * directive is optional, but recommended. If not set, this restriction will be disabled.
	 */
	#regdelay = 5m

	/*
	 * The length of time before a nick's registration expires.
	 *
	 * This directive is optional, but recommended. If not set, the default is one year.
	 */
	expire = 1y

	/*
	 * Prevents the use of the ACCESS and CERT (excluding their LIST subcommand), DROP, FORBID, SUSPEND
	 * and SET PASSWORD commands by services operators on other services operators.
	 *
	 * This directive is optional, but recommended.
	 */
	secureadmins = yes

	/*
	 * If set, Anope will set the channel modes a user has access to upon identifying, assuming
	 * they are not already set.
	 *
	 * This directive is optional.
	 */
	modeonid = yes

	/*
	 * If set, Anope will set these user modes on any user who identifies.
	 *
	 * This directive is optional.
	 */
	#modesonid = "+R"

	/*
	 * If set, Anope will not show netsplits in the last quit message field
	 * of NickServ's INFO command.
	 */
	hidenetsplitquit = no

	/*
	 * If set, is the length of time NickServ's killquick and kill options wait before
	 * forcing users off of protected nicknames.
	 */
	killquick = 5s
	kill = 60s

	/*
	 * If set, forbids the registration of nicks that contain an existing
	 * nick with services access. For example, if Tester is a Services Oper,
	 * you can't register NewTester or Tester123 unless you are an IRC
	 * Operator.
	 *
	 * NOTE: If you enable this, you will have to be logged in as an IRC
	 * operator in order to register a Services Root nick when setting up
	 * Anope for the first time.
	 *
	 * This directive is optional.
	 */
	#restrictopernicks = yes

	/*
	 * The username, and possibly hostname, used for fake users created when Anope needs to
	 * hold a nickname.
	 */
	enforceruser = "enforcer"
	enforcerhost = "services.hold.enforce"

	/*
	 * The length of time Anope should hold nicknames for.
	 *
	 * This directive is optional, but recommended. If not set it defaults to 1 minute.
	 */
	releasetimeout = 1m

	/*
	 * When a user's nick is forcibly changed to enforce a "nick kill", their new nick will start
	 * with this value. The rest will be made up of 6 or 7 digits.
	 * Make sure this is a valid nick and Nicklen+7 is not longer than the allowed Nicklen on your ircd.
	 *
	 * This directive is optional. If not set it defaults to "Guest"
	 */
	guestnickprefix = "Guest"

	/*
	 * If set, Anope does not allow ownership of nick names, only ownership of accounts.
	 */
	nonicknameownership = no

	/*
	 * The minimum length of passwords
	 *
	 * This directive is optional. If not set it defaults to 10.
	 */
	minpasslen = 3

	/*
	 * The maximum length of passwords
	 *
	 * This directive is optional. If not set it defaults to 50.
	 */
	maxpasslen = 50

	/*
	 * Whether all of the secondary nicks of a nick group have to expire or be
	  dropped before the display nick can expire or be dropped.
	 */
	preservedisplay = no
}

/*
 * Core NickServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */

/* Command group configuration for NickServ.
 *
 * Commands may optionally be placed into groups to make NickServ's HELP output easier to understand.
 * Remove the following groups to use the old behavior of simply listing all NickServ commands from HELP.
 */
command_group
{
	name = "nickserv/admin"
	description = _("Services Operator commands")
}

/* Give it a help command. */
command { service = "NickServ"; name = "HELP"; command = "generic/help"; }

/*
 * ns_ajoin
 *
 * Provides the command nickserv/ajoin.
 *
 * Used for configuring channels to join once you identify.
 */
module
{
	name = "ns_ajoin"

	/*
	 * The maximum number of channels a user can have on NickServ's AJOIN command.
	 */
	ajoinmax = 10
}
command { service = "NickServ"; name = "AJOIN"; command = "nickserv/ajoin"; }

/*
 * ns_alist
 *
 * Provides the command nickserv/alist.
 *
 * Used for viewing what channels you have access to.
 */
module { name = "ns_alist" }
command { service = "NickServ"; name = "ALIST"; command = "nickserv/alist"; }
command { service = "NickServ"; name = "ACCESS"; command = "nickserv/alist"; hide = true; }

/*
 * ns_cert
 *
 * Provides the command nickserv/cert.
 *
 * Used for configuring your SSL certificate list, which can be used to automatically identify you.
 */
module
{
	name = "ns_cert"

	/*
	* Should users who are connected with a SSL client certificate have its fingerprint be added to
	* their account when they register. Defaults to yes.
	*/
	automatic = yes

	/*
	 * The maximum number of entries allowed on a nickname's certificate fingerprint list.
	 * The default is 5. This number cannot be set to 0.
	 */
	max = 5
}
command { service = "NickServ"; name = "CERT"; command = "nickserv/cert"; }

/*
 * ns_drop
 *
 * Provides the command nickserv/drop.
 *
 * Used for unregistering names.
 */
module { name = "ns_drop" }
command { service = "NickServ"; name = "DROP"; command = "nickserv/drop"; }

/*
 * ns_getemail
 *
 * Provides the command nickserv/getemail.
 *
 * Used for getting registered accounts by searching for emails.
 */
module { name = "ns_getemail" }
command { service = "NickServ"; name = "GETEMAIL"; command = "nickserv/getemail"; permission = "nickserv/getemail"; group = "nickserv/admin"; }

/*
 * ns_group
 *
 * Provides the commands nickserv/group, nickserv/glist, and nickserv/ungroup.
 *
 * Used for controlling nick groups.
 */
module
{
	name = "ns_group"

	/*
	 * The maximum number of nicks allowed in a group.
	 *
	 * This directive is optional, but recommended. If not set or set to 0, no limits will be applied.
	 */
	maxaliases = 6

	/*
	 * If set, the NickServ GROUP command won't allow any group changes. This is recommended to
	 * prevent users from accidentally dropping their nicks, as it forces users to explicitly
	 * drop their nicks before adding it to another group.
	 *
	 * This directive is optional, but recommended.
	 */
	nogroupchange = yes
}
command { service = "NickServ"; name = "GLIST"; command = "nickserv/glist"; }
command { service = "NickServ"; name = "GROUP"; command = "nickserv/group"; }
command { service = "NickServ"; name = "UNGROUP"; command = "nickserv/ungroup"; }

/*
 * ns_identify
 *
 * Provides the command nickserv/identify.
 *
 * Used for identifying to accounts.
 */
module
{
	name = "ns_identify"

	/*
	 * If set, limits the number of concurrent users that can be logged in as a given account at once.
	 */
	maxlogins = 10
}
command { service = "NickServ"; name = "ID"; command = "nickserv/identify"; hide = true; }
command { service = "NickServ"; name = "IDENTIFY"; command = "nickserv/identify"; }

/*
 * ns_info
 *
 * Provides the commands:
 * nickserv/info. - Used for gathering information about an account.
 * nickserv/set/hide, nickserv/saset/hide - Used for configuring which options are publicly shown in nickserv/info.
 *
 */
module { name = "ns_info" }
command { service = "NickServ"; name = "INFO"; command = "nickserv/info"; }

command { service = "NickServ"; name = "SET HIDE"; command = "nickserv/set/hide"; }
command { service = "NickServ"; name = "SASET HIDE"; command = "nickserv/saset/hide"; permission = "nickserv/saset/hide"; }


/*
 * ns_list
 *
 * Provides the commands:
 *   nickserv/list - Used for retrieving and searching the registered account list.
 *   nickserv/set/private, nickserv/saset/private - Used for configuring whether or a users account shows up in nickserv/list.
 *
 */
module
{
	name = "ns_list"

	/*
	 * The maximum number of nicks to be returned for a NickServ LIST command.
	 */
	listmax = 50
}
command { service = "NickServ"; name = "LIST"; command = "nickserv/list"; }

command { service = "NickServ"; name = "SET PRIVATE"; command = "nickserv/set/private"; }
command { service = "NickServ"; name = "SASET PRIVATE"; command = "nickserv/saset/private"; permission = "nickserv/saset/private"; }


/*
 * ns_logout
 *
 * Provides the command nickserv/logout.
 *
 * Used for logging out of your account.
 */
module { name = "ns_logout" }
command { service = "NickServ"; name = "LOGOUT"; command = "nickserv/logout"; }

/*
 * ns_recover
 *
 * Provides the command nickserv/recover.
 *
 * Used for recovering your nick from services or another user.
 */
module
{
	name = "ns_recover"

	/*
	 * If set, Anope will svsnick and svsjoin users who use the recover
	 * command on an identified user to the nick and channels of the recovered user.
	 *
	 * This directive is optional.
	 */
	restoreonrecover = yes
}
command { service = "NickServ"; name = "RECOVER"; command = "nickserv/recover"; }

# For compatibility with Anope 1.8 and Atheme.
command { service = "NickServ"; name = "GHOST"; command = "nickserv/recover"; hide = true; }
command { service = "NickServ"; name = "RELEASE"; command = "nickserv/recover"; hide = true; }

/*
 * ns_register
 *
 * Provides the commands nickserv/confirm, nickserv/register, and nickserv/resend.
 *
 * Used for registering accounts.
 */
module
{
	name = "ns_register"

	/*
	 * Registration confirmation setting. Set to "none" for no registration confirmation,
	 * "mail" for email confirmation, and "admin" to have services operators manually confirm
	 * every registration. Set to "disable" to completely disable all registrations.
	 */
	registration = "admin"

	/*
	 * The minimum length of time between consecutive uses of NickServ's RESEND command.
	 *
	 * This directive is optional, but recommended. If not set, this restriction will be disabled.
	 */
	resenddelay = 90s

	/*
	 * Prevents users from registering their nick if they are not connected
	 * for at least the given number of seconds.
	 *
	 * This directive is optional.
	 */
	nickregdelay = 5s

	/*
	 * The length of time a user using an unconfirmed account has
	 * before the account will be released for general use again.
	 */
	unconfirmedexpire = 7d
}
command { service = "NickServ"; name = "CONFIRM"; command = "nickserv/confirm"; }
command { service = "NickServ"; name = "REGISTER"; command = "nickserv/register"; }
command { service = "NickServ"; name = "RESEND"; command = "nickserv/resend"; }

/*
 * ns_resetpass
 *
 * Provides the command nickserv/resetpass.
 *
 * Used for resetting passwords by emailing users a temporary one.
 */
module { name = "ns_resetpass" }
command { service = "NickServ"; name = "RESETPASS"; command = "nickserv/resetpass"; }

/*
 * ns_set
 *
 * Provides the commands:
 *   nickserv/set, nickserv/saset - Dummy help wrappers for the SET and SASET commands.
 *   nickserv/set/autoop, nickserv/saset/autoop - Determines whether or not modes are automatically set users when joining a channel.
 *   nickserv/set/display, nickserv/saset/display - Used for setting a users display name.
 *   nickserv/set/email, nickserv/saset/email - Used for setting a users email address.
 *   nickserv/set/keepmodes, nickserv/saset/keepmodes - Configure whether or not services should retain a user's modes across sessions.
 *   nickserv/set/kill, nickserv/saset/kill - Used for configuring nickname protection.
 *   nickserv/set/neverop, nickserv/saset/neverop - Used to configure whether a user can be added to access lists
 *   nickserv/saset/noexpire - Used for configuring noexpire, which prevents nicks from expiring.
 *   nickserv/set/password, nickserv/saset/password  - Used for changing a users password.
 */
module
{
	name = "ns_set"

	/*
	 * Allow the use of the IMMED option in the NickServ SET KILL command.
	 *
	 * This directive is optional.
	 */
	#allowkillimmed = yes
}

command { service = "NickServ"; name = "SET"; command = "nickserv/set"; }
command { service = "NickServ"; name = "SASET"; command = "nickserv/saset"; permission = "nickserv/saset/"; group = "nickserv/admin"; }

command { service = "NickServ"; name = "SET AUTOOP"; command = "nickserv/set/autoop"; }
command { service = "NickServ"; name = "SASET AUTOOP"; command = "nickserv/saset/autoop"; permission = "nickserv/saset/autoop"; }

command { service = "NickServ"; name = "SET DISPLAY"; command = "nickserv/set/display"; }
command { service = "NickServ"; name = "SASET DISPLAY"; command = "nickserv/saset/display"; permission = "nickserv/saset/display"; }

command { service = "NickServ"; name = "SET EMAIL"; command = "nickserv/set/email"; }
command { service = "NickServ"; name = "SASET EMAIL"; command = "nickserv/saset/email"; permission = "nickserv/saset/email"; }

command { service = "NickServ"; name = "SET KEEPMODES"; command = "nickserv/set/keepmodes"; }
command { service = "NickServ"; name = "SASET KEEPMODES"; command = "nickserv/saset/keepmodes"; permission = "nickserv/saset/keepmodes"; }

command { service = "NickServ"; name = "SET KILL"; command = "nickserv/set/kill"; }
command { service = "NickServ"; name = "SASET KILL"; command = "nickserv/saset/kill"; permission = "nickserv/saset/kill"; }

command { service = "NickServ"; name = "SET PASSWORD"; command = "nickserv/set/password"; }
command { service = "NickServ"; name = "SASET PASSWORD"; command = "nickserv/saset/password"; permission = "nickserv/saset/password"; }

command { service = "NickServ"; name = "SET NEVEROP"; command = "nickserv/set/neverop"; }
command { service = "NickServ"; name = "SASET NEVEROP"; command = "nickserv/saset/neverop"; permission = "nickserv/saset/neverop"; }

command { service = "NickServ"; name = "SASET NOEXPIRE"; command = "nickserv/saset/noexpire"; permission = "nickserv/saset/noexpire"; }

/*
 * ns_set_language
 *
 * Provides the command nickserv/set/language and nickserv/saset/language.
 *
 * Allows configuring the language that services uses.
 */
module { name = "ns_set_language" }
command { service = "NickServ"; name = "SET LANGUAGE"; command = "nickserv/set/language"; }
command { service = "NickServ"; name = "SASET LANGUAGE"; command = "nickserv/saset/language"; permission = "nickserv/saset/language"; }

/*
 * ns_set_message
 *
 * Provides the command nickserv/set/message and nickserv/saset/message.
 *
 * Allows users to let services send them PRIVMSGs instead of NOTICEs.
 *
 * This might cause problems with badly written clients as the IRC RFC
 * requires that automatic responses to a PRIVMSG use a NOTICE to avoid
 * message loops. Only enable this if you are sure this can not happen.
 */
#module { name = "ns_set_message" }
#command { service = "NickServ"; name = "SET MESSAGE"; command = "nickserv/set/message"; }
#command { service = "NickServ"; name = "SASET MESSAGE"; command = "nickserv/saset/message"; permission = "nickserv/saset/message"; }

/*
 * ns_set_misc
 *
 * Provides the command nickserv/set/misc.
 *
 * Allows you to create arbitrary commands to set data, and have that data show up in nickserv/info.
 * A field named misc_description may be given for use with help output.
 */
module { name = "ns_set_misc" }
command { service = "NickServ"; name = "SET URL"; command = "nickserv/set/misc"; misc_description = _("Associate a URL with your account"); }
command { service = "NickServ"; name = "SASET URL"; command = "nickserv/saset/misc"; misc_description = _("Associate a URL with this account"); permission = "nickserv/saset/url"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET DISCORD"; command = "nickserv/set/misc"; misc_description = _("Associate a Discord account with your account"); }
#command { service = "NickServ"; name = "SASET DISCORD"; command = "nickserv/saset/misc"; misc_description = _("Associate a Discord account with this account"); permission = "nickserv/saset/discord"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET MASTODON"; command = "nickserv/set/misc"; misc_description = _("Associate a Mastodon account with your account"); }
#command { service = "NickServ"; name = "SASET MASTODON"; command = "nickserv/saset/misc"; misc_description = _("Associate a Mastodon account with this account"); permission = "nickserv/saset/mastodon"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET TIMEZONE"; command = "nickserv/set/misc"; misc_description = _("Associate a time zone with your account"); }
#command { service = "NickServ"; name = "SASET TIMEZONE"; command = "nickserv/saset/misc"; misc_description = _("Associate a time zone with this account"); permission = "nickserv/saset/timezone"; group = "nickserv/admin"; }

/*
 * ns_suspend
 *
 * Provides the commands nickserv/suspend and nickserv/unsuspend.
 *
 * Used to suspend and unsuspend nicknames. Suspended nicknames can not be used but their settings are preserved.
 */
module
{
	name = "ns_suspend"

	/*
	 * The length of time before a suspended nick becomes unsuspended.
	 *
	 * This directive is optional. If not set, the default is never.
	 */
	#suspendexpire = 90d

	/*
	 * Settings to show to non-opers in NickServ's INFO output.
	 * Comment to completely disable showing any information about
	 * suspended nicknames to non-opers.
	 */
	show = "suspended, by, reason, on, expires"
}
command { service = "NickServ"; name = "SUSPEND"; command = "nickserv/suspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
command { service = "NickServ"; name = "UNSUSPEND"; command = "nickserv/unsuspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }

/*
 * ns_update
 *
 * Provides the command nickserv/update.
 *
 * Used to update your status on all channels, turn on your vHost, etc.
 */
module { name = "ns_update" }
command { service = "NickServ"; name = "UPDATE"; command = "nickserv/update"; }


/*
 * Extra NickServ related modules.
 */

/*
 * ns_maxemail
 *
 * Limits how many times the same email address may be used in Anope
 * to register accounts.
 */
#module
{
	name = "ns_maxemail"

	/*
	 * The limit to how many registered nicks can use the same email address. If set to 0 or left
	 * commented, there will be no limit enforced when registering new accounts or using
	 * /msg NickServ SET EMAIL.
	 */
	maxemails = 1
}

[sadiepowell]

Do you have mail:usemail enabled in your config file? (please share the mail block)?

What happens when you type /msg NickServ RESETPASS <your-nickname-here>? Are there any errors in your log?

[legendskyk]

(10:06:54) -NickServ- Unknown command restpass Robo. "/msg NickServ HELP" for help.

this msg get we disabled email system to make it confimed by operator due to spam happening with register nick too.

[sadiepowell]

You can't use resetpass enabled with mail:usemail disabled because it relies on email to send reset emails. Server operators can change user passwords with SASET PASSWORD.

[legendskyk]

how to enabled it?

[sadiepowell]

You need to re-enable the option I just mentioned.