diff --git a/source/bsp/imx8/imx8mp-fpsc/alpha1.rst b/source/bsp/imx8/imx8mp-fpsc/alpha1.rst index ae17c9d78..a474bfdbe 100644 --- a/source/bsp/imx8/imx8mp-fpsc/alpha1.rst +++ b/source/bsp/imx8/imx8mp-fpsc/alpha1.rst @@ -39,7 +39,7 @@ .. |kernel-recipe-path| replace:: meta-phytec/recipes-kernel/linux/linux-phytec-imx_*.bb .. |kernel-repo-name| replace:: linux-phytec-imx .. |kernel-repo-url| replace:: https://github.com/phytec/linux-phytec-imx -.. |kernel-socname| replace:: imx8mp-fpsc +.. |kernel-socname| replace:: imx8mp .. |kernel-tag| replace:: v6.6.52-2.2.0-phy20 .. |emmcdev| replace:: mmcblk2 .. |led-names| replace:: red:user1, green:user2 and blue:user3 @@ -511,13 +511,13 @@ On the |som| SoM: * SoM Detection EEPROM (write-protected) - * Bus: I2C-0 + * Bus: I2C-1 * Address: 0x51 * Purpose: Factory configuration for SoM identification * User EEPROM - * Bus: I2C-0 + * Bus: I2C-1 * Address: 0x50 * Purpose: Available for user applications @@ -528,7 +528,7 @@ And on the |sbc| carrier board: * Board Detection EEPROM - * Bus: I2C-1 + * Bus: I2C-2 * Address: 0x51 * Purpose: Reserved for carrier board identification diff --git a/source/bsp/imx8/imx8mp-fpsc/bootmode-switch.rsti b/source/bsp/imx8/imx8mp-fpsc/bootmode-switch.rsti index e915798f9..bafa3fa9b 100644 --- a/source/bsp/imx8/imx8mp-fpsc/bootmode-switch.rsti +++ b/source/bsp/imx8/imx8mp-fpsc/bootmode-switch.rsti @@ -1,35 +1,35 @@ Internal fuses - .. figure:: /bsp/images/dipswitch-tristate-4-pppp.svg + .. figure:: /bsp/images/dipswitch-tristate-4-0p00.svg :scale: 400% Boot from internal fuses USB - .. figure:: /bsp/images/dipswitch-tristate-4-mppp.svg + .. figure:: /bsp/images/dipswitch-tristate-4-mp00.svg :scale: 400% USB serial download eMMC - .. figure:: /bsp/images/dipswitch-tristate-4-pmpp.svg + .. figure:: /bsp/images/dipswitch-tristate-4-0000.svg :scale: 400% Boot from onboard e.MMC SD card - .. figure:: /bsp/images/dipswitch-tristate-4-mmpp.svg + .. figure:: /bsp/images/dipswitch-tristate-4-m000.svg :scale: 400% Boot from external SD card SPI NOR flash - .. figure:: /bsp/images/dipswitch-tristate-4-pmmp.svg + .. figure:: /bsp/images/dipswitch-tristate-4-00m0.svg :scale: 400% Boot from onboard SPI NOR flash JTAG - .. figure:: /bsp/images/dipswitch-tristate-4-mmmm.svg + .. figure:: /bsp/images/dipswitch-tristate-4-m0mm.svg :scale: 400% JTAG mode diff --git a/source/bsp/imx8/imx8mp-fpsc/head.rst b/source/bsp/imx8/imx8mp-fpsc/head.rst index 23db1dff2..bb1bef932 100644 --- a/source/bsp/imx8/imx8mp-fpsc/head.rst +++ b/source/bsp/imx8/imx8mp-fpsc/head.rst @@ -2,29 +2,29 @@ .. |dlpage-bsp| replace:: our BSP .. _dlpage-bsp: https://www.phytec.de/bsp-download/?bsp=BSP-Yocto-NXP-i.MX8MP-PD26.1.0 .. |dlpage-bsp-link| replace:: |dlpage-bsp|_ -.. |dlpage-product| replace:: https://www.phytec.de/produkte/system-on-modules/phycore-imx-8m-plus-fpsc/#downloads +.. |dlpage-product| replace:: https://www.phytec.de/produkte/system-on-modules/phyflex-imx-8m-plus-fpsc/#downloads .. |dl-server| replace:: BSP downloads .. _dl-server: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/ .. |dl-server-link| replace:: |dl-server|_ .. |dl-sdk| replace:: SDK downloads .. _dl-sdk: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/sdk/ampliphy-vendor/ .. |dl-sdk-link| replace:: |dl-sdk|_ -.. |link-image| replace:: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/images/ampliphy-vendor/imx8mp-libra-fpsc-1/phytec-qt6demo-image-imx8mp-libra-fpsc-1.rootfs.wic.xz -.. |link-partup-package| replace:: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/images/ampliphy-vendor/imx8mp-libra-fpsc-1/phytec-qt6demo-image-imx8mp-libra-fpsc-1.rootfs.partup -.. |link-boot-tools| replace:: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/images/ampliphy-vendor/imx8mp-libra-fpsc-1/imx-boot-tools/ -.. |link-bsp-images| replace:: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/images/ampliphy-vendor/imx8mp-libra-fpsc-1/ +.. |link-image| replace:: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/images/ampliphy-vendor/imx8mp-phyflex-libra-rdk-2/phytec-qt6demo-image-imx8mp-libra-fpsc-1.rootfs.wic.xz +.. |link-partup-package| replace:: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/images/ampliphy-vendor/imx8mp-phyflex-libra-rdk-2/phytec-qt6demo-image-imx8mp-libra-fpsc-1.rootfs.partup +.. |link-boot-tools| replace:: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/images/ampliphy-vendor/imx8mp-phyflex-libra-rdk-2/imx-boot-tools/ +.. |link-bsp-images| replace:: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-NXP-i.MX8MP-PD26.1.0/images/ampliphy-vendor/imx8mp-phyflex-libra-rdk-2/ .. _releasenotes: https://git.phytec.de/phy2octo/tree/releasenotes?h=imx8mp .. _`static-pdf-dl`: ../../../_static/imx8mp-fpsc-head.pdf .. IMX8(MP) specific .. General Substitutions -.. |kit| replace:: **phyCORE-i.MX 8M Plus FPSC Kit** +.. |kit| replace:: **phyFLEX-i.MX 8M Plus Libra Rapid Development Kit** .. |kit-ram-size| replace:: 2GiB -.. |sbc| replace:: Libra FPSC +.. |sbc| replace:: phyFLEX Libra .. |soc| replace:: i.MX 8M Plus .. |socfamily| replace:: i.MX 8 -.. |som| replace:: phyCORE-|soc| FPSC +.. |som| replace:: phyFLEX-|soc| FPSC Gamma .. |debug-uart| replace:: ttymxc3 .. |serial-uart| replace:: ttymxc2 .. |bluetooth-uart| replace:: UART3 @@ -39,14 +39,14 @@ .. |kernel-recipe-path| replace:: meta-phytec/recipes-kernel/linux/linux-phytec-imx_*.bb .. |kernel-repo-name| replace:: linux-phytec-imx .. |kernel-repo-url| replace:: https://github.com/phytec/linux-phytec-imx -.. |kernel-socname| replace:: imx8mp-fpsc -.. |kernel-tag| replace:: v6.12.20-2.0.0-phyX +.. |kernel-socname| replace:: imx8mp +.. |kernel-tag| replace:: v6.12.49-2.2.0-phyX .. |emmcdev| replace:: mmcblk2 .. |led-names| replace:: red:status, green:status and blue:status .. |led-example| replace:: red\\:status .. Bootloader -.. |u-boot-defconfig| replace:: imx8mp-libra_defconfig +.. |u-boot-defconfig| replace:: imx8mp-phyflex-libra-rdk_defconfig .. |bootloader-offset| replace:: 32 .. |bootloader-offset-boot-part| replace:: 0 .. |u-boot-mmc-flash-offset| replace:: 0x40 @@ -58,36 +58,36 @@ .. |sdcarddev-uboot| replace:: mmc 1 .. IMX8(MP) specific -.. |u-boot-socname-config| replace:: IMX8MP_LIBRA -.. |u-boot-tag| replace:: v2025.04-2.0.0-phyX +.. |u-boot-socname-config| replace:: IMX8MP_PHYFLEX_LIBRA_RDK +.. |u-boot-tag| replace:: v2025.04-2.2.0-phyX .. RAUC .. |rauc-manual| replace:: L-1006e.A6 RAUC Update & Device Management Manual .. _rauc-manual: https://www.phytec.de/cdocuments/?doc=F4DiM .. Devicetree -.. |dt-carrierboard| replace:: imx8mp-libra-rdk-fpsc -.. |dt-som| replace:: imx8mp-phycore-fpsc +.. |dt-carrierboard| replace:: imx8mp-phyflex-libra-rdk +.. |dt-som| replace:: imx8mp-phyflex-fpsc-g-som .. IMX8(MP) specific -.. |dt-somnetwork| replace:: :linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L82` -.. |dt-gpio-expander| replace:: :linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L192` +.. |dt-somnetwork| replace:: :linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L82` +.. |dt-gpio-expander| replace:: :linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L192` .. Yocto .. |yocto-bootenv-link| replace:: :yocto-bootenv:`walnascar` -.. |yocto-bsp-name| replace:: BSP-Yocto-IMX8MP-FPSC +.. |yocto-bsp-name| replace:: BSP-Yocto-IMX8MP .. _yocto-bsp-name: `dl-server`_ .. |yocto-codename| replace:: Walnascar -.. |yocto-distro| replace:: ampliphy-vendor-xwayland +.. |yocto-distro| replace:: ampliphy-vendor .. |yocto-imagename| replace:: phytec-qt6demo-image .. |yocto-imageext| replace:: rootfs.wic.xz -.. |yocto-machinename| replace:: imx8mp-libra-fpsc-1 +.. |yocto-machinename| replace:: imx8mp-phyflex-libra-rdk-2 .. |yocto-manifestname| replace:: BSP-Yocto-NXP-i.MX8MP-PD26.1.0 .. |yocto-manifestname-master| replace:: BSP-Yocto-Ampliphy-i.MX8MP-master .. |yocto-manifestname-y| replace:: BSP-Yocto-NXP-i.MX8MP-PD26.1.y .. |yocto-ref-manual| replace:: :ref:`Yocto Reference Manual (walnascar) ` .. |yocto-ref-manual-kernel-and-bootloader-conf| replace:: :ref:`Yocto Reference Manual ` -.. |yocto-sdk-rev| replace:: 5.2.x +.. |yocto-sdk-rev| replace:: 5.2.4 .. |yocto-sdk-a-core| replace:: cortexa53-crypto .. Ref Substitutions @@ -108,7 +108,7 @@ .. |sbc-network| replace:: The device tree set up for EQOS Ethernet IP core where the PHY is populated on the |sbc| can be found here: - :linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#97`. + :linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#97`. .. |ref-serial| replace:: :ref:`X27 ` .. |ref-S5| replace:: :ref:`S5 ` @@ -168,7 +168,7 @@ First Start-up * To boot from an SD card, the |ref-bootswitch| needs to be set to the following position: - .. image:: /bsp/images/dipswitch-tristate-4-mmpm.svg + .. image:: /bsp/images/dipswitch-tristate-4-m000.svg :scale: 400% * Insert the SD card @@ -198,8 +198,8 @@ First Start-up * **fitImage-its\*.its** * **Image**: Linux kernel image * **Image.config**: Kernel configuration -* **imx8mp-libra-rdk-fpsc*.dtb**: Kernel device tree file -* **imx8mp-libra*.dtbo**: Kernel device tree overlay files +* **imx8mp-phyflex-libra-rdk*.dtb**: Kernel device tree file +* **imx8mp-phyflex-libra*.dtbo**: Kernel device tree overlay files * **phytec-qt6demo-image\*.tar.gz**: Root file system * **phytec-qt6demo-image\*.rootfs.wic.xz**: compressed SD card image @@ -323,26 +323,26 @@ the efi, rauc and script bootmethods are supported. .. code-block:: :substitutions: - imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtbo - imx8mp-libra-rdk-fpsc-lvds-ph128800t006-zhc01.dtbo - imx8mp-libra-rdk-fpsc-vm016-csi1.dtbo - imx8mp-libra-rdk-fpsc-vm016-csi1-fpdlink-port0.dtbo - imx8mp-libra-rdk-fpsc-vm016-csi1-fpdlink-port1.dtbo - imx8mp-libra-rdk-fpsc-vm016-csi2.dtbo - imx8mp-libra-rdk-fpsc-vm016-csi2-fpdlink-port0.dtbo - imx8mp-libra-rdk-fpsc-vm016-csi2-fpdlink-port1.dtbo - imx8mp-libra-rdk-fpsc-vm017-csi1.dtbo - imx8mp-libra-rdk-fpsc-vm017-csi1-fpdlink-port0.dtbo - imx8mp-libra-rdk-fpsc-vm017-csi1-fpdlink-port1.dtbo - imx8mp-libra-rdk-fpsc-vm017-csi2.dtbo - imx8mp-libra-rdk-fpsc-vm017-csi2-fpdlink-port0.dtbo - imx8mp-libra-rdk-fpsc-vm017-csi2-fpdlink-port1.dtbo - imx8mp-libra-rdk-fpsc-vm020-csi1.dtbo - imx8mp-libra-rdk-fpsc-vm020-csi1-fpdlink-port0.dtbo - imx8mp-libra-rdk-fpsc-vm020-csi1-fpdlink-port1.dtbo - imx8mp-libra-rdk-fpsc-vm020-csi2.dtbo - imx8mp-libra-rdk-fpsc-vm020-csi2-fpdlink-port0.dtbo - imx8mp-libra-rdk-fpsc-vm020-csi2-fpdlink-port1.dtbo + imx8mp-phyflex-libra-rdk-lvds-etml1010g3dra.dtbo + imx8mp-phyflex-libra-rdk-lvds-ph128800t006-zhc01.dtbo + imx8mp-phyflex-libra-rdk-vm016-csi1.dtbo + imx8mp-phyflex-libra-rdk-vm016-csi1-fpdlink-port0.dtbo + imx8mp-phyflex-libra-rdk-vm016-csi1-fpdlink-port1.dtbo + imx8mp-phyflex-libra-rdk-vm016-csi2.dtbo + imx8mp-phyflex-libra-rdk-vm016-csi2-fpdlink-port0.dtbo + imx8mp-phyflex-libra-rdk-vm016-csi2-fpdlink-port1.dtbo + imx8mp-phyflex-libra-rdk-vm017-csi1.dtbo + imx8mp-phyflex-libra-rdk-vm017-csi1-fpdlink-port0.dtbo + imx8mp-phyflex-libra-rdk-vm017-csi1-fpdlink-port1.dtbo + imx8mp-phyflex-libra-rdk-vm017-csi2.dtbo + imx8mp-phyflex-libra-rdk-vm017-csi2-fpdlink-port0.dtbo + imx8mp-phyflex-libra-rdk-vm017-csi2-fpdlink-port1.dtbo + imx8mp-phyflex-libra-rdk-vm020-csi1.dtbo + imx8mp-phyflex-libra-rdk-vm020-csi1-fpdlink-port0.dtbo + imx8mp-phyflex-libra-rdk-vm020-csi1-fpdlink-port1.dtbo + imx8mp-phyflex-libra-rdk-vm020-csi2.dtbo + imx8mp-phyflex-libra-rdk-vm020-csi2-fpdlink-port0.dtbo + imx8mp-phyflex-libra-rdk-vm020-csi2-fpdlink-port1.dtbo .. _imx8mp-fpsc-head-ubootexternalenv: .. include:: /bsp/dt-overlays-ampliphy-boot.rsti @@ -377,7 +377,7 @@ resistors are activated or not. In this case, the internal resistors are disabled. The device tree representation for UART3 pinmuxing: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L714` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L714` RS232 ----- @@ -420,7 +420,7 @@ Hardware Manual section UARTs. The switch |ref-S5| need to be set correctly. host:~$ cat /dev/ttyUSB2 The device tree representation for RS232: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L271` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L271` .. _imx8mp-fpsc-head-network: @@ -456,12 +456,12 @@ device must then be configured as follows: .. include:: /bsp/imx-common/peripherals/sd-card.rsti DT configuration for the MMC (SD card slot) interface can be found here: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L401` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L401` and -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L318` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L318` DT configuration for the e.MMC interface can be found here: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L412` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L412` .. include:: ../imx8mp/emmc.rsti @@ -472,22 +472,22 @@ DT configuration for the e.MMC interface can be found here: The definition of the SPI master node in the device tree can be found here: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L128` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L128` .. include:: gpios.rsti .. include:: /bsp/peripherals/leds.rsti Device tree configuration for the User I/O configuration can be found here: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L165` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L165` .. include:: /bsp/imx-common/peripherals/i2c-bus.rsti General I²C bus configuration from SoM (e.g. |dt-som|.dtsi): -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L188` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L188` General I²C bus configuration from carrierboard (e.g. |dt-carrierboard|.dts) -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L149` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L149` EEPROM ------ @@ -499,18 +499,18 @@ On the |som| SoM: * SoM Detection EEPROM (write-protected) - * Bus: I2C-5 + * Bus: I2C-1 * Address: 0x51 * Purpose: Factory configuration for SoM identification * User EEPROM - * Bus: I2C-5 + * Bus: I2C-1 * Address: 0x50 * Purpose: Available for user applications Device Tree Reference for SoM EEPROMs: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L276` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L276` And on the |sbc| carrier board: @@ -527,17 +527,17 @@ And on the |sbc| carrier board: * Purpose: Available for user applications Device Tree Reference for Carrier Board: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L153` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L153` .. include:: /bsp/imx-common/peripherals/eeprom.rsti .. include:: /bsp/peripherals/rtc.rsti DT representation for I²C RTCs: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L293` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L293` And the addions on the carrierboard: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L252` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L252` USB Host Controller ------------------- @@ -552,7 +552,7 @@ connected to a USB 3.0 PHY. .. include:: /bsp/peripherals/usb-host.rsti DT representation for USB Host: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L295` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L295` .. include:: /bsp/peripherals/usb-device.rsti @@ -576,18 +576,18 @@ documentation: https://www.kernel.org/doc/html/latest/networking/can.html .. include:: /bsp/peripherals/canfd.rsti Device Tree CAN configuration of |dt-som|.dtsi: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L109` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L109` and of |dt-carrierboard|.dts: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L117` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L117` .. include:: /bsp/peripherals/pcie.rsti Device Tree PCIe configuration of |dt-som|.dtsi: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi#L339` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-fpsc-g-som.dtsi#L339` and of |dt-carrierboard|.dts: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L245` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L245` .. include:: /bsp/peripherals/video.rsti @@ -598,7 +598,7 @@ and of |dt-carrierboard|.dts: .. include:: /bsp/imx-common/peripherals/display.rsti Device tree description of LVDS-0 can be found here: -:linux-phytec-imx:`tree/v6.12.20-2.0.0-phy1/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts#L223` +:linux-phytec-imx:`tree/v6.12.49-2.2.0-phy/arch/arm64/boot/dts/freescale/imx8mp-phyflex-libra-rdk.dts#L223` .. include:: /bsp/peripherals/gpu.rsti