BT failed on Lemans-evk and Monaco-evk for both distro and overlay with 6.19-rc2

[vnarapar]

Probe issue on lemans evk and monaco evk with 6.19-rc2
Jan 01 00:00:22 qcom-armv8a kernel: bluetooth hci0: Direct firmware load for qca/hpbtfw21.tlv failed with error -2

dmesg | grep bluetooth
[ 11.088817] [ T111] bluetooth hci0: Direct firmware load for qca/hpbtfw21.tlv failed with error -2
[ 21.130157] [ T707] Modules linked in: usb_f_fs libcomposite fuse ipv6 snd_soc_hdmi_codec ath11k_pci ath11k tpm_tis_spi mac80211 libarc4 phy_qcom_edp tpm_tis_core qcom_edac sha256 apr fastrpc qca808x pdr_interface rpmsg_ctrl qcom_pd_mapper qrtr_smd rpmsg_char qcom_phy_lib qcom_pdr_msg cfg80211 mhi msm ubwc_config hci_uart btqca ocmem qcom_iris drm_gpuvm drm_exec gpu_sched videobuf2_dma_contig v4l2_mem2mem drm_dp_aux_bus videobuf2_memops drm_display_helper bluetooth videobuf2_v4l2 cec rtc_pm8xxx drm_client_lib snd_soc_sc8280xp ecdh_generic videobuf2_common ecc drm_kms_helper snd_soc_qcom_sdw at24 rfkill snd_soc_qcom_common videodev spi_geni_qcom pwrseq_qcom_wcn drm lontium_lt8713sx dispcc0_sa8775p camcc_sa8775p soundwire_bus videocc_sa8775p pwrseq_core qcom_stats qcom_refgen_regulator mc icc_bwmon llcc_qcom gpi phy_qcom_sgmii_eth stm_p_basic phy_qcom_qmp_usb coresight_stm phy_qcom_snps_femto_v2 coresight_cti stm_core coresight_tpdm dwmac_qcom_ethqos stmmac_platform stmmac pcs_xpcs qrtr phylink mdio_devres of_mdio qcom_q6v5_pas

[INFO] 2025-10-13 16:43:22 - ------------------------------------------------------------
[INFO] 2025-10-13 16:43:22 - Starting BT_ON_OFF Testcase
[INFO] 2025-10-13 16:43:22 - Checking dependency: bluetoothctl
[INFO] 2025-10-13 16:43:22 - Checking if bluetoothd is running...
[INFO] 2025-10-13 16:43:22 - bluetoothd is running
[INFO] 2025-10-13 16:43:22 - Using adapter: hci0
[INFO] 2025-10-13 16:43:22 - Initial Powered = no
[INFO] 2025-10-13 16:43:22 - Powering OFF...
[INFO] 2025-10-13 16:43:22 - btpower: hci0 already Powered=no; skipping 'power off'.
[PASS] 2025-10-13 16:43:22 - Post-OFF verification: Powered=no (as expected).
[INFO] 2025-10-13 16:43:22 - Powering ON...
[INFO] 2025-10-13 16:43:22 - btpower: requesting 'on' on hci0 (current=no)
[WARN] 2025-10-13 16:44:09 - btpower: hci0 state after request is 'no' (wanted on).
[FAIL] 2025-10-13 16:44:09 - btpower(hci0, on) failed (command-level error).