NEWS

Release a.b
-----------

 * samtools merge now accepts a BED file as a command line argument (-L) and
   does the merging only with reads overlapping the specified regions.

Release 1.10 (6th December 2019)
--------------------------------

Changes affecting the whole of samtools, or multiple sub-commands:

 * Samtools now uses the new HTSlib header API.  As this adds more checks
   for invalid headers, it is possible that some illegal files will now
   be rejected when they would have been allowed by earlier versions. (#998)

   Examples of problems that will now be rejected include @SQ lines with
   no SN: tag, and @RG or @PG lines with no ID: tag.

 * samtools sub-commands will now add '@PG' header lines to output sam/bam/cram
   files.  To disable this, use the '--no-PG' option. (#1087; #1097)

 * samtools now supports alignment records with reference positions greater
   than 2 gigabases.  This allows samtools to process alignments for
   species which have large chromosomes, like axolotl and lungfish.  Note that
   due to file format limitations, data with large reference positions
   must use the SAM format. (#1107; #1117)

 * Improved the efficiency of reading and writing SAM format data by 2 fold
   (single thread). This is further improved by the ability to use multiple
   threads, as previously done with BAM and CRAM.

 * samtools can now write BGZF-compressed SAM format.  To enable this,
   either save files with a '.sam.gz' suffix, or use '--output-fmt sam.gz'.

 * samtools can now index BGZF-compressed SAM files.

 * The region parsing code has been improved to handle colons in reference
   names.  Strings can be disambiguated by the use of braces, so for
   example when reference sequences called "chr1" and "chr1:100-200"
   are both present, the regions "{chr1}:100-200" and "{chr1:100-200}"
   unambiguously indicate which reference is being used. (#864)

 * samtools flags, flagstats, idxstats and stats now have aliases
   flag, flagstat, idxstat and stat. (#934)

 * A new global '--write-index' option has been added.  This allows output
   sam.gz/bam/cram files to be indexed while they are being written out.
   This should work with addreplacerg, depad, markdup, merge, sort, split,
   and view. (#1062)

 * A global '--verbosity' option has been added to enable/disable
   debugging output. (#1124, thanks to John Marshall)

 * It is now possible to have data and index files stored in different
   locations.  There are two ways to tell samtools where to find the
   index:

   1. Samtools bedcov, depth, merge, mpileup, stats, tview, and view
      accept a new option (-X).  When this is used, each input sam/bam/cram
      listed on the command line should have a corresponding index file.
      Note that all the data files should be listed first, followed by all
      the index files. (#978, thanks to Mingfei Shao)

   2. A delimiter '##idx##' can be appended to the data file name followed
      by the index file name.  This can be used both for input files and
      outputs when indexing on-the-fly.

 * HTSlib (and therefore SAMtools) now uses version 4 signatures by default
   for its s3:// plug-in.  It can also write to S3 buckets, as long as
   version 4 signatures are in use.  See HTSlib's NEWS file and
   htslib-s3-plugin manual page for more information.

 * HTSlib (and therefore SAMtools) no longer considers a zero-length
   file to be a valid SAM file.  This has been changed so that pipelines such
   as `somecmd | samtools ...` with `somecmd` aborting before outputting
   anything will now propagate the error to the second command.

 * The samtools manual page has been split up into one for each
   sub-command.  The main samtools.1 manual page now lists the sub-commands
   and describes the common global options. (#894)

 * The meaning of decode_md, store_md and store_nm in the fmt-option section
   of the samtools.1 man page has been clarified. (#898, thanks to Evan Benn)

 * Fixed numerous memory leaks. (#892)

 * Fixed incorrect macro definition on Windows. (#950)

 * bedcov, phase, misc/ace2sam and misc/wgsim now check for failure to open
   files.  (#1013, thanks to Julie Blommaert and John Marshall)

Changes affecting specific sub-commands:

 * A new "coverage" sub-command has been added.  This prints a tabular format
   of the average coverage and percent coverage for each reference sequence,
   as well as number of aligned reads, average mapping quality and base
   quality.  It can also (with the '-m' option) plot a histogram of
   coverage across the genome. (#992, thanks to Florian Breitwieser)

 * samtools calmd:

   - Reference bases in MD: tags are now converted to upper case. (#981, #988)

 * samtools depth:

   - Add new options to write a header to the output (-H) and to direct
     the output to a file (-o).  (#937, thanks to Pierre Lindenbaum)

   - New options '-g' and '-G' can be used to filter reads. (#953)

   - Fix memory leak when failing to set CRAM options. (#985, thanks
     to Florian Breitwieser)

   - Fix bug when using region filters where the '-a' option did not
     work for regions with no coverage. (#1113; #1112 reported by
     Paweł Sztromwasser)

 * samtools fasta and fastq:

   - '-1 FILE -2 FILE' with the same filename now works properly. (#1042)

   - '-o FILE' is added as a synonym for '-1 FILE -2 FILE'. (#1042)

   - The '-F' option now defaults to 0x900 (SECONDARY,SUPPLEMENTARY).
     Previously secondary and supplementary records were filtered internally
     in a way that could not be turned off. (#1042; #939 reported
     by @finswimmer)

   - Allow reading from a pipe without an explicit '-' on the command line.
     (#1042; #874 reported by John Marshall)

   - Turn on multi-threading for bgzf compressed output files. (#908)

   - Fixed bug where the samtools fastq -i would output incorrect information
     in the Casava tags for dual-index reads.  It also now prints the tags
     for dual indices in the same way as bcl2fastq, using a '+' sign between
     the two parts of the index. (#1059; #1047 reported by Denis Loginov)

 * samtools flagstat:

   - Samtools flagstat can now optionally write its output in JSON format or
     as a tab-separated values file. (#1106, thanks to Vivek Rai).

 * samtools markdup:

   - It can optionally tag optical duplicates (reads following Illumina
     naming conventions only).  The is enabled with the '-d' option,
     which sets the distance for duplicates to be considered as optical.
     (#1091; #1103; #1121; #1128; #1134)

   - The report stats (-s) option now outputs counts for optical and
     non-primary (supplementary / secondary) duplicates.  It also reports
     the Picard "estimate library size" statistic.  A new '-f' option
     can be used to save the statistics in a given file. (#1091)

   - The rules for calling duplicates can be changed using the new --mode
     option.  This mainly changes the position associated with each read in
     a pair.  '--mode t' (the default) is the existing behaviour where the
     position used is that of the outermost template base associated with the
     read. Alternatively '--mode s' always uses the first unclipped sequence
     base.  In practice, this only makes a difference for read pairs where the
     two reads are aligned in the same direction. (#1091)

   - A new '-c' option can be used to clear any existing duplicate tags.
     (#1091)

   - A new '--include-fails' option makes markdup include QC-failed reads.
     (#1091)

   - Fixed buffer overflow in temporary file writer when writing a mixture
     of long and short alignment records. (#911; #909)

 * samtools mpileup:

   - mpileup can now process alignments including CIGAR P (pad) operators
     correctly.  They will now also produce the correct output for alignments
     where insertions are immediately followed by deletions, or deletions by
     insertions.  Note that due to limitations in HTSlib, they are still
     unable to output sequences that have been inserted before the first
     aligned base of a read. (#847; #842 reported by Tiffany Delhomme.
     See also htslib issue #59 and pull request #699).

   - In samtools mpileup, a deletion or pad on the reverse strand is now
     marked with a different character ('#') than the one used on a forward
     strand ('*'), if the '--reverse-del' option is used. (#1070)

   - New option '--output-extra' can be used to add columns for user
     selected alignment fields or aux tags. (#1073)

   - Fixed double-counting of overlapping bases in alignment records with
     deletions or reference skips longer than twice the insert size.
     (#989; #987 reported by @dariomel)

   - Improved manual page with documentation about what each output column
     means. (#1055, thanks to John Marshall)

 * samtools quickcheck:

   - Add unmapped (-u) option, which disables the check for @SQ lines in
     the header. (#920, thanks to Shane McCarthy)

 * samtools reheader:

   - A new option '-c' allows the input header to be passed to a given
     command.  Samtools then takes the output of this command and uses it
     as the replacement header. (#1007)

   - Make it clear in help message that reheader --in-place only works on
     CRAM files. (#921, thanks to Julian Gehring)

   - Refuse to in-place reheader BAM files, instead of unexpectedly writing
     a BAM file to stdout. (#935)

 * samtools split:

   - In samtools split, the '-u' option no longer accepts an extra file name
     from which a replacement header was read.  The two file names were
     separated using a colon, which caused problems on Windows and prevented
     the use of URLs.  A new '-h' option has been added to allow the replacement
     header file to be specified in its own option. (#961)

   - Fixed bug where samtools split would crash if it read a SAM header that
     contained an @RG line with no ID tag. (#954, reported by @blue-bird1)

 * samtools stats:

   - stats will now compute base compositions for BC, CR, OX and RX tags,
     and quality histograms for QT, CY, BZ and QX tags. (#904)

   - New stats FTC and LTC showing total number of nucleotides for first and
     last fragments. (#946)

   - The rules for classifying reads as "first" or "last" fragment have been
     tightened up. (#949)

   - Fixed bug where stats could over-estimate coverage when using the
     target-regions option or when a region was specified on the command-line.
     (#1027; #1025, reported by Miguel Machado; #1029, reported by Jody Phelan).

   - Fixed error in stats GCD percentile depth calculation when the depth to be
     reported fell between two bins.  It would report the depth entirely from
     the lower bin instead of taking a weighted average of the two. (#1048)

   - Better catching and reporting of out of memory conditions. (#984;
     #982, reported by Jukka Matilainen)

   - Improved manual page. (#927)

 * samtools tview:

   - tview can now display alignments including CIGAR P operators, D followed
     by I and I followed by D correctly.  See mpileup above for more
     information. (#847; #734, reported by Ryan Lorig-Roach)

   - The "go to position" text entry box has been made wider. (#968, thanks
     to John Marshall)

   - Fixed samtools tview -s option which was not filtering reads correctly.
     It now only shows reads from the requested sample or read group. (#1089)

 * samtools view:

   - New options '-d' and '-D' to only output alignments which have a tag
     with a given type and value. (#1001, thanks to Gert Hulselmans)

 * misc/plot-bamstats script:

   - Fixed merge (-m) option. (#923, #924 both thanks to Marcus D Sherman)

   - Made the quality heatmap work with gnuplot version 5.2.7 and later.
     (#1068; #1065 reported by Martin Mokrejš)

   - Fixed --do-ref-stats bug where fasta header lines would be counted
     as part of the sequence when the --targets option was used. (#1120,
     thanks to Neil Goodgame)

 * Removed the misc/varfilter.py Python script, as it takes consensus-pileup
   as input, which was removed from samtools in release 0.1.17 in 2011. (#1125)

Release 1.9 (18th July 2018)
----------------------------

 * Samtools mpileup VCF and BCF output is now deprecated.  It is still
   functional, but will warn.  Please use bcftools mpileup instead. (#884)

 * Samtools mpileup now handles the '-d' max_depth option differently.  There
   is no longer an enforced minimum, and '-d 0' is interpreted as limitless
   (no maximum - warning this may be slow).  The default per-file depth is
   now 8000, which matches the value mpileup used to use when processing
   a single sample.  To get the previous default behaviour use the higher
   of 8000 divided by the number of samples across all input files, or 250.
   (#859)

 * Samtools stats new features:

   - The '--remove-overlaps' option discounts overlapping portions of
     templates when computing coverage and mapped base counting. (#855)

   - When a target file is in use, the number of bases inside the
     target is printed and the percentage of target bases with coverage
     above a given threshold specified by the '--cov-threshold' option. (#855)

   - Split base composition and length statistics by first and last reads.
     (#814, #816)

 * Samtools faidx new features:

   - Now takes long options. (#509, thanks to Pierre Lindenbaum)

   - Now warns about zero-length and truncated sequences due to the
     requested range being beyond the end of the sequence. (#834)

   - Gets a new option (--continue) that allows it to carry on
     when a requested sequence was not in the index. (#834)

   - It is now possible to supply the list of regions to output in a text
     file using the new '--region-file' option. (#840)

   - New '-i' option to make faidx return the reverse complement of
     the regions requested. (#878)

   - faidx now works on FASTQ (returning FASTA) and added a new
     fqidx command to index and return FASTQ. (#852)

 * Samtools collate now has a fast option '-f' that only operates on
   primary pairs, dropping secondary and supplementary.  It tries to write
   pairs to the final output file as soon as both reads have been found. (#818)

 * Samtools bedcov gets a new '-j' option to make it ignore deletions (D) and
   reference skips (N) when computing coverage. (#843)

 * Small speed up to samtools coordinate sort, by converting it to use
   radix sort. (#835, thanks to Zhuravleva Aleksandra)

 * Samtools idxstats now works on SAM and CRAM files, however this
   isn't fast due to some information lacking from indices. (#832)

 * Compression levels may now be specified with the level=N
   output-fmt-option.  E.g. with -O bam,level=3.

 * Various documentation improvements.

 * Bug-fixes:

   - Improved error reporting in several places. (#827, #834, #877, cd7197)

   - Various test improvements.

   - Fixed failures in the multi-region iterator (view -M) when regions
     provided via BED files include overlaps (#819, reported by Dave Larson).

   - Samtools stats now counts '=' and 'X' CIGAR operators when
     counting mapped bases. (#855)

   - Samtools stats has fixes for insert size filtering (-m, -i). (#845; #697
     reported by Soumitra Pal)

   - Samtools stats -F now longer negates an earlier -d option. (#830)

   - Fix samtools stats crash when using a target region. (#875, reported by
     John Marshall)

   - Samtools sort now keeps to a single thread when the -@ option is absent.
     Previously it would spawn a writer thread, which could cause the CPU
     usage to go slightly over 100%. (#833, reported by Matthias Bernt)

   - Fixed samtools phase '-A' option which was incorrectly defined to take
     a parameter. (#850; #846 reported by Dianne Velasco)

   - Fixed compilation problems when using C_INCLUDE_PATH. (#870; #817 reported
     by Robert Boissy)

   - Fixed --version when built from a Git repository. (#844, thanks to
     John Marshall)

   - Use noenhanced mode for title in plot-bamstats.  Prevents unwanted
     interpretation of characters like underscore in gnuplot version 5. (#829,
     thanks to M. Zapukhlyak)

   - blast2sam.pl now reports perfect match hits (no indels or mismatches).
     (#873, thanks to Nils Homer)

   - Fixed bug in fasta and fastq subcommands where stdout would not be flushed
     correctly if the -0 option was used.

   - Fixed invalid memory access in mpileup and depth on alignment records
     where the sequence is absent.

Release 1.8 (3rd April 2018)
----------------------------

 * samtools calmd now has a quiet mode.  This can be enabled by passing `-Q` to
   calmd. (Thanks to Colin Davenport)

 * In samtools depth `-d 0` will effectively remove the depth limit. (#764)

 * Improvements made to samtools collate's interface and documentation.  It is
   now possible to specify an output file name using `-o`, instead of deriving  
   it from the prefix used for temporary files.  The prefix itself is now
   optional if `-o` or `-O` (to stdout) is used. (#780)

 * Bug-fixes:

   - Make samtools addreplacerg choose output format by file extension. (#767; 
     reported by Argy Megalios)

   - Merge tests now work on ungzipped data, allowing tests to be run against
     different deflate libraries.

   - samtools markdup error messages about missing tags have been updated with
     the suggestion that samtools fixmate is run beforehand. (#765; reported by
     Yudong Cai)

   - Enables the `--reference` option for samtools fastq.  Now works like other
     programs when a reference sequence is needed for CRAM files. (#791,
     reported by Milana Kaljevic)


Release 1.7 (26th January 2018)
--------------------

* HTSlib, and so samtools, now support BAMs which include CIGARs with more
  than 65535 operations as per HTS-Specs 18th November (dab57f4 and 2f915a8).

* samtools quickcheck will now write a warning to stderr if it finds
  any problems.  These messages can be suppressed with a new `-q` option.

* samtools markdup can now mark supplementary alignments of reads where
  the primary alignment is found to be a duplicate.  Supplementary marking
  can be turned on by passing the `-S` option to markdup.  When this
  option is enabled, all the alignment data will be written to a temporary
  file so that supplementary alignments that occur before a duplicated
  primary can be correctly marked in the final output.  The location
  of this temporary file can be influenced using the new `-T` option.

* samtools view now supports HTSlib's new multi-region iterator.
  This can be enabled by passing the `-M` option to view.  When using
  this option:

  - The BED filter (`-L` option) will use the index to skip through the file
  - Reads from overlapping regions will only be output once
  
* samtools bedcov will now ignore BED comment and header lines (#571; thanks
  to Daniel Baker).

* samtools collate now updates the @HD SO: and GO: tags, and sort will
  remove a GO: tag if present.  (#757; reported by Imran Haque).

* Bug-fixes:

 - maq2sam now checks for input files that end early.  (#751; patch supplied
   by Alexandre Rebert of the Mayhem team, via Andreas Tille from Debian.)

 - Fixed incorrect check when looking up header tags that could lead
   to a crash in samtools stats. (#208; thanks to Dave Larson.)

 - Fixed bug in samtools fastq `-O` option where it would fail if
   the OQ tag in the input file had an unexpected type. (#758;
   reported by Taejeong Bae)

 - The MD5 calculations in samtools dict and md5fa did not handle
   non-alphabetic characters in the same way as the CRAM MD5 function.
   They have now been updated to match. (#704; reported by Chris Norman).

 - Fix possible infinite loop in samtools targetcut.

 - Building bam_tview_curses should no longer fail if a curses header file
   cannot be found.

Release 1.6 (28th September 2017)
--------------------

* Added new markdup sub-command and '-m' option for fixmate.  Used together,
  they allow duplicates to be marked and optionally removed.  This
  fixes a number of problems with the old 'rmdup' sub-command, for
  example samtools issue #497.  'rmdup' is kept for backwards compatibility
  but 'markdup' should be used in preference.

* Sort is now much better at keeping within the requested memory limit.  It
  should also be slightly faster and need fewer temporary files when the file
  to be sorted does not fit in memory.  (#593; thanks to Nathan Weeks.)

* Sort no longer rewrites the header when merging from files.  It can also
  now merge from memory, so fewer temporary files need to be written and
  it is better at sorting in parallel when everything fits in memory.

* Both sort and merge now resolve ties when merging based on the position
  in the input file(s).  This makes them fully stable for all ordering
  options.  (Previously position sort was stable, but name and by tag
  sorts were not).

* New --output-qname option for mpileup.

* Support for building on Windows using msys2/mingw64 or cygwin has
  been improved.

Release 1.5 [Solstice Release] (21st June 2017)
--------------------

* Samtools fastq now has a -i option to create a fastq file from an index
  tag, and a -T option (similar to -t) to add user specified aux tags to
  the fastq header line.

* Samtools fastq can now create compressed fastq files, by giving the
  output filenames an extention of .gq, .bgz, or .bgzf

* Samtools sort has a -t TAG option, that allows records to be sorted by
  the value of the specified aux tag, then by position or name.  Merge
  gets a similar option, allowing files sorted this way to be merged.
  (#675; thanks to Patrick Marks of 10xgenomics).

Release 1.4.1  (8th May 2017)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

* Added options to fastq to create fastq files from BC (or other)
  tags.

* Samtools view has gained a -G <flags> option to exclude on all bits
  set.  For example to discard reads where neither end has been
  mapped use "-G 12".

* Samtools cat has a -b <fofn> option to ease concatenation of many
  files.

* Added misc/samtools_tab_completion for bash auto-completion of
  samtools sub-commands. (#560)

* Samtools tview now has J and K keys for verticale movement by 20
  lines. (#257)

* Various compilation / portability improvements.

* Fixed issue with more than 65536 CIGAR operations and SAM/CRAM files.
  (#667)


Release 1.4  (13 March 2017)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Noteworthy changes in samtools:

* Fixed Issue #345 - out-by-one error in insert-size in samtools stats

* bam_split now add a @PG header to the bam file

* Added mate cigar tag support to fixmate

* Multi-threading is now supported for decoding BAM and CRAM (as well
  as the previously supported encoding).  Most commands that read BAM
  or CRAM have gained an -@ or --threads arguments, providing a
  significant speed bonus.  For commands that both read and write
  files the threads are shared between decoding and encoding tasks.

* Added -a option to samtools mpileup to show all locations, including
  sites with zero depth; repeating the option as -aa or -a -a additionally
  shows reference sequences without any reads mapped to them (#496).

* The mpileup text output no longer contains empty columns at zero coverage
  positions.  Previously it would output "...0\t\t..." in some circumstances
  (zero coverage due to being below a minumum base quality); this has been
  fixed to output as "...0\t*\t*..." with placeholder '*' characters as in
  other zero coverage circumstances (see PR #537).

* To stop it from creating too many temporary files, samtools sort
  will now not run unless its per-thread memory limit (-m) is set to
  at least 1 megabyte (#547).

* The misc/plot-bamstats script now has a -l / --log-y option to change
  various graphs to display their Y axis log-scaled.  Currently this
  affects the Insert Size graph (PR #589; thanks to Anton Kratz).

* Fixmate will now also add and update MC (mate CIGAR) tags.


Beta Release 1.3.1  (22 April 2016)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Noteworthy changes in samtools:

* The sort command creates any needed temporary files alongside the final
  output file (similarly to the pre-1.3 behaviour), and now aborts when
  it detects a collision with another sort invocation's temporary files.

  When the -T PREFIX option specified is a directory (or when sorting to
  standard output), a random component is now added to temporary filenames
  to try to avoid collisions (#432, #523, #529, #535, PR #530).

* All samtools commands now check for I/O errors more carefully, especially
  when writing output files (#111, #253, #470, PR #467).

* Build fixes for 32-bit systems; be sure to run configure on such systems
  to enable large file support and access to 2GiB+ files.

* The fasta/fastq/bam2fq command no longer ignores reads when the -s option
  is used (#532).

* The fastq -O option no longer crashes on reads that do not have an OQ tag
  field (#517).

* The merge and sort commands now handle (unusual) BAM files that have no
  textual @SQ headers (#548, #550).

* Sorting files containing @CO headers no longer duplicates the comment
  headers, which previously happened on large sorts for which temporary
  files were needed (#563).

* The rmdup and view -l commands no longer crash on @RG headers that do not
  have a LB field (#538).

* Fixed miscellaneous issues #128, #130, #131, #489, and #514.


Beta Release 1.3  (15 December 2015)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Noteworthy changes in samtools:

* The obsolete "samtools sort in.bam out.prefix" usage has been removed.
  If you are still using -f, -o, or out.prefix, convert to use -T PREFIX
  and/or -o FILE instead.  (#295, #349, #356, #418, PR #441; see also
  discussions in #171, #213.)

* When writing CRAM output, samtools now defaults to writing CRAM v3.0
  rather than v2.1.

* The "bamshuf" command has been renamed to "collate" (hence the term
  bamshuf no longer appears in the documentation, though it still works
  on the command line for compatibility with existing scripts).

* The mpileup command now outputs the unseen allele in VCF/BCF as <*>
  rather than X or <X> as previously, and now has AD, ADF, ADR, INFO/AD,
  INFO/ADF, INFO/ADR --output-tags annotations that largely supersede
  the existing DV, DP4, DPR annotations.

* The mpileup command now applies BAQ calculations at all base positions,
  regardless of which -l or -r options are used (previously with -l it was
  not applied to the first few tens of bases of each chromosome, leading
  to different mpileup results with -l vs. -r; #79, #125, #286, #407).

* Samtools now has a configure script which checks your build environment
  and facilitates choosing which HTSlib to build against.  See INSTALL
  for details.

* Samtools's Makefile now fully supports the standard convention of
  allowing CC/CPPFLAGS/CFLAGS/LDFLAGS/LIBS to be overridden as needed.
  Previously it listened to $(LDLIBS) instead; if you were overriding
  that, you should now override LIBS rather than LDLIBS.

* A new addreplacerg command that adds or alters @RG headers and RG:Z
  record tags has been added.

* The rmdup command no longer immediately aborts (previously it always
  aborted with "bam_get_library() not yet implemented"), but remains
  not recommended for most use (#159, #252, #291, #393).

* Merging files with millions of headers now completes in a reasonable
  amount of time (#337, #373, #419, #453; thanks to Nathan Weeks,
  Chris Smowton, Martin Pollard, Rob Davies).

* Samtools index's optional index output path argument works again (#199).

* Fixed calmd, targetcut, and potential mpileup segfaults when given broken
  alignments with POS far beyond the end of their reference sequences.

* If you have source code using bam_md.c's bam_fillmd1_core(), bam_cap_mapQ(),
  or bam_prob_realn_core() functions, note that these now take an additional
  ref_len parameter.  (The versions named without "_core" are unchanged.)

* The tview command's colour scheme has been altered to be more suitable
  for users with colour blindness (#457).

* Samtools depad command now handles CIGAR N operators and accepts
  CRAM files (#201, #404).

* Samtools stats now outputs separate "N" and "other" columns in the
  ACGT content per cycle section (#376).

* Added -a option to samtools depth to show all locations, including
  zero depth sites (#374).

* New samtools dict command, which creates a sequence dictionary
  (as used by Picard) from a FASTA reference file.

* Samtools stats --target-regions option works again.

* Added legacy API sam.h functions sam_index_load() and samfetch() providing
  bam_fetch()-style iteration over either BAM or CRAM files.  (In general
  we recommend recoding against the htslib API directly, but this addition
  may help existing libbam-using programs to be CRAM-enabled easily.)

* Fixed legacy API's samopen() to write headers only with "wh" when writing
  SAM files.  Plain "w" suppresses headers for SAM file output, but this
  was broken in 1.2.

* "samtools fixmate - -" works in pipelines again; with 1.0 to 1.2,
  this failed with "[bam_mating] cannot determine output format".

* Restored previous "samtools calmd -u" behaviour of writing compression
  level 0 BAM files.  Samtools 1.0 to 1.2 incorrectly wrote raw non-BGZF
  BAM files, which cannot be read by most other tools.  (Samtools commands
  other than calmd were unaffected by this bug.)

* Restored bam_nt16_nt4_table[] to legacy API header bam.h.

* Fixed bugs #269, #305, #320, #328, #346, #353, #365, #392, #410, #445,
  #462, #475, and #495.


Beta Release 1.2  (2 February 2015)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Noteworthy changes in samtools:

* Flagstat now works on SAM, BAM, or CRAM files (rather than BAM only)
* Stats calculates mismatches per cycle for unclipped length
* Merge can now merge SAM input files
* CRAM reference files are now cached by default (see HTSlib release
  notes and samtools(1) man page)
* Tested against Intel-optimised zlib (https://github.com/jtkukunas/zlib;
  see README for details)
* Fixed bugs #302, #309, #318, and #327 and many other improvements
  and bugs fixed in HTSlib -- see the HTSlib release notes


Beta Release 1.1 (19 September, 2014)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes in samtools:

 * Sorting files with thousands of reference contigs now completes in
   a reasonable amount of time (#260)
 * Fixmate and flagstat now consider supplementary reads
 * Fixmate now only adds a template cigar tag ("ct:Z") when requested
   via a new -c option, and never adds it repeatedly (#276)
 * Mpileup DPR annotation fixed (#274)
 * Checksum added to stats command output
 * Removed view -Q option


Beta Release 1.0 (15 August, 2014)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

First release of HTSlib-based samtools.

Numerous changes, notably support for the CRAM sequencing file format.

The faidx command now reads either uncompressed or BGZF-compressed FASTA files
compressed with bgzip.  In previous samtools-0.1.x versions, faidx could read
either uncompressed or RAZF-compressed FASTA files, but RAZF and razip are
superseded by BGZF/bgzip and have been removed from samtools.


Beta Release 0.1.20 (15 August, 2014)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Final release of standalone samtools.


Beta Release 0.1.19 (15 March, 2013)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes in samtools and bcftools:

 * The latest source code and development moved to github,
    http://github.com/samtools/samtools

 * Many important bugfixes and contributions by many people. Thanks to all!

 * Performance improvements (multi-threading)

 * Important changes in calling, see
    - samtools mpileup -p
    - bcftools view -m

 * New annotations useful for filtering (RPB, HWE, QBD, MDV)

 * New tools, bamcheck and plot-bamcheck

 * New features in samtools tview

 * And much more..

For a detailed list of commits, please see
http://github.com/samtools/samtools/commits/master

(0.1.19: 15 March 2013, commit 96b5f2294ac0054230e88913c4983d548069ea4e)


Beta Release 0.1.18 (2 September, 2011)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes in samtools:

 * Support the new =/X CIGAR operators (by Peter Cock).

 * Allow to subsample BAM while keeping the pairing intact (view -s).

 * Implemented variant distance bias as a new filter (by Petr Danecek).

 * Bugfix: huge memory usage during indexing

 * Bugfix: use of uninitialized variable in mpileup (rare)

 * Bugfix: wrong BAQ probability (rare)

Notable changes in bcftools:

 * Support indel in the contrast caller.

 * Bugfix: LRT2=nan in rare cases

(0.1.18: 2 September 2011, r982:295)



Beta Release 0.1.17 (6 July, 2011)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

With the maturity of `mpileup' and the lack of update in the `pileup' command,
the `pileup' command is now formally dropped. Most of the pileup functionality,
such as outputting mapping quality and read positions, have been added
`mpileup'.

Since this release, `bcftools view' is able to perform contrast SNP calling
(option -T) for discovering de novo and/or somatic mutations between a pair of
samples or in a family trio. Potential mutations are scored by a log likelihood
ratio, which is very simple in math, but should be comparable to more
sophisticated methods. Note that getting the score is only the very first step.
A lot more need to be done to reduce systematical errors due to mapping and
reference errors and structural variations.

Other notable changes in samtools:

 * Improved sorting order checking during indexing.

 * Improved region parsing. Colons in reference sequence names are parsed
   properly.

 * Fixed an issue where mpileup does not apply BAQ for the first few reads when
   a region is specified.

 * Fixed an issue where `faidx' does not work with FASTA files with long lines.

 * Bugfix: wrong SP genotype information in the BCF output.

Other notable changes in bcftools:

 * Output the ML esitmate of the allele count.

 * Added the HWE plus F<0 filter to varFilter. For multiple samples, it
   effectively filters false heterozygous calls around centromeres.

 * For association mapping, perform both 1-degree and 2-degree test. The
   2-degree test is conservative but more robust to HWE violation.

(0.1.17: 6 July 2011, r973:277)



Beta Release 0.1.16 (21 April, 2011)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes in samtools:

 * Support the new SAM/BAM type `B' in the latest SAM spec v1.4.

 * When the output file of `samtools merge' exists, do not overwrite it unless
   a new command-line option `-f' is applied.

 * Bugfix: BED support is not working when the input BED is not sorted.

 * Bugfix: some reads without coordinates but given on the reverse strand are
   lost in merging.

Notable changes in bcftools:

 * Code cleanup: separated max-likelihood inference and Bayesian inference.

 * Test Hardy-Weinberg equilibrium with a likelihood-ratio test.

 * Provided another association test P-value by likelihood-ratio test.

 * Use Brent's method to estimate the site allele frequency when EM converges
   slowly. The resulting ML estimate of allele frequnecy is more accurate.

 * Added the `ldpair' command, which computes r^2 between SNP pairs given in
   an input file.

Also, the `pileup' command, which has been deprecated by `mpileup' since
version 0.1.10, will be dropped in the next release. The old `pileup' command
is substandard and causing a lot of confusion.

(0.1.16: 21 April 2011, r963:234)



Beta Release 0.1.15 (10 April, 2011)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Noteable changes:

 * Allow to perform variant calling or to extract information in multiple
   regions specified by a BED file (`samtools mpileup -l', `samtools view -L'
   and `bcftools view -l').

 * Added the `depth' command to samtools to compute the per-base depth with a
   simpler interface. File `bam2depth.c', which implements this command, is the
   recommended example on how to use the mpileup APIs.

 * Estimate genotype frequencies with ML; perform chi^2 based Hardy-Weinberg
   test using this estimate.

 * For `samtools view', when `-R' is specified, drop read groups in the header
   that are not contained in the specified file.

 * For `samtools flagstat', separate QC-pass and QC-fail reads.

 * Improved the command line help of `samtools mpileup' and `bcftools view'.

 * Use a global variable to control the verbose level of samtools stderr
   output. Nonetheless, it has not been full utilized.

 * Fixed an issue in association test which may report false associations,
   possibly due to floating point underflow.

(0.1.15: 10 April 2011, r949:203)



Beta release 0.1.14 (21 March, 2011)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This release implements a method for testing associations for case-control
data. The method does not call genotypes but instead sums over all genotype
configurations to compute a chi^2 based test statistics. It can be potentially
applied to comparing a pair of samples (e.g. a tumor-normal pair), but this
has not been evaluated on real data.

Another new feature is to make X chromosome variant calls when female and male
samples are both present. The user needs to provide a file indicating the
ploidy of each sample (see also manual bcftools/bcftools.1).

Other notable changes:

 * Added `bcftools view -F' to parse BCF files generated by samtools r921 or
   older which encodes PL in a different way.

 * Changed the behavior of `bcftools view -s'. Now when a list of samples is
   provided, the samples in the output will be reordered to match the ordering
   in the sample list. This change is mainly designed for association test.

 * Sped up `bcftools view -v' for target sequencing given thousands of samples.
   Also added a new option `view -d' to skip loci where only a few samples are
   covered by reads.

 * Dropped HWE test. This feature has never been implemented properly. An EM
   should be much better. To be implemented in future.

 * Added the `cat' command to samtools. This command concatenate BAMs with
   identical sequence dictionaries in an efficient way. Modified from bam_cat.c
   written by Chris Saunders.

 * Added `samtools view -1' to write BAMs at a low compression level but twice
   faster to create. The `sort' command generates temporary files at a low
   compression level as well.

 * Added `samtools mpileup -6' to accept "BAM" with Illumina 1.3+ quality
   strings (strictly speaking, such a file is not BAM).

 * Added `samtools mpileup -L' to skip INDEL calling in regions with
   excessively high coverage. Such regions dramatically slow down mpileup.

 * Updated `misc/export2sam.pl', provided by Chris Saunders from Illumina Inc.

(0.1.14: 21 March 2011, r933:170)



Beta release 0.1.13 (1 March, 2011)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The most important though largely invisible modification is the change of the
order of genotypes in the PL VCF/BCF tag. This is to conform the upcoming VCF
spec v4.1. The change means that 0.1.13 is not backward compatible with VCF/BCF
generated by samtools older than r921 inclusive.  VCF/BCF generated by the new
samtools will contain a line `##fileformat=VCFv4.1' as well as the samtools
version number.

Single Individual Haplotyping (SIH) is added as an experimental feature. It
originally aims to produce haploid consensus from fosmid pool sequencing, but
also works with short-read data. For short reads, phased blocks are usually too
short to be useful in many applications, but they can help to rule out part of
SNPs close to INDELs or between copies of CNVs.


Other notable changes in samtools:

 * Construct per-sample consensus to reduce the effect of nearby SNPs in INDEL
   calling. This reduces the power but improves specificity.

 * Improved sorting order checking in indexing. Now indexing is the preferred way
   to check if a BAM is sorted.

 * Added a switch `-E' to mpileup and calmd. This option uses an alternative way
   to apply BAQ, which increases sensistivity, especially to MNPs, at the cost of
   a little loss in specificity.

 * Added `mpileup -A' to allow to use reads in anomalous pairs in SNP calling.

 * Added `mpileup -m' to allow fine control of the collection of INDEL candidates.

 * Added `mpileup -S' to compute per-sample strand bias P-value.

 * Added `mpileup -G' to exclude read groups in variant calling.

 * Fixed segfault in indel calling related to unmapped and refskip reads.

 * Fixed an integer overflow in INDEL calling. This bug produces wrong INDEL
   genotypes for longer short INDELs, typically over 10bp.

 * Fixed a bug in tview on big-endian machines.

 * Fixed a very rare memory issue in bam_md.c

 * Fixed an out-of-boundary bug in mpileup when the read base is `N'.

 * Fixed a compiling error when the knetfile library is not used. Fixed a
   library compiling error due to the lack of bam_nt16_nt4_table[] table.
   Suppress a compiling warning related to the latest zlib.


Other notable changes in bcftools:

 * Updated the BCF spec.

 * Added the `FQ' VCF INFO field, which gives the phred-scaled probability
   of all samples being the same (identical to the reference or all homozygous
   variants). Option `view -f' has been dropped.

 * Implementated of "vcfutils.pl vcf2fq" to generate a consensus sequence
   similar to "samtools.pl pileup2fq".

 * Make sure the GT FORMAT field is always the first FORMAT to conform the VCF
   spec. Drop bcf-fix.pl.

 * Output bcftools specific INFO and FORMAT in the VCF header.

 * Added `view -s' to call variants from a subset of samples.

 * Properly convert VCF to BCF with a user provided sequence dictionary. Nonetheless,
   custom fields are still unparsed and will be stored as a missing value.

 * Fixed a minor bug in Fisher's exact test; the results are rarely changed.


(0.1.13: 1 March 2011, r926:134)



Beta release 0.1.12a (2 December, 2010)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is another bug fix release:

 * Fixed a memory violation in mpileup, which causes segfault. Release
   0.1.9 and above are affected.

 * Fixed a memory violation in the indel caller, which does not causes
   segfault, but may potentially affect deletion calls in an unexpected
   way. Release 0.1.10 and above are affected.

 * Fixed a bug in computing r-square in bcftools. Few are using this
   functionality and it only has minor effect.

 * Fixed a memory leak in bam_fetch().

 * Fixed a bug in writing meta information to the BAM index for the last
   sequence. This bug is invisible to most users, but it is a bug anyway.

 * Fixed a bug in bcftools which causes false "DP4=0,0,0,0" annotations.

(0.1.12: 2 December 2010, r862)



Beta release 0.1.11 (21 November, 2010)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is mainly a bug fix release:

 * Fixed a bug in random retrieval (since 0.1.8). It occurs when reads
   are retrieved from a small region containing no reads.

 * Fixed a bug in pileup (since 0.1.9). The bug causes an assertion
   failure when the first CIGAR operation is a deletion.

 * Improved fault tolerence in remote access.

One minor feature has been implemented in bcftools:

 * Added a reference-free variant calling mode. In this mode, a site is
   regarded as a variat iff the sample(s) contains two or more alleles;
   the meaning of the QUAL field in the VCF output is changed
   accordingly. Effectively, the reference allele is irrelevant to the
   result in the new mode, although the reference sequence has to be
   used in realignment when SAMtools computes genotype likelihoods.

In addition, since 0.1.10, the `pileup' command has been deprecated by
`mpileup' which is more powerful and more accurate. The `pileup' command
will not be removed in the next few releases, but new features will not
be added.

(0.1.11: 21 November 2010, r851)



Beta Release 0.1.10 (16 November, 2010)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This release is featured as the first major improvement to the indel
caller. The method is similar to the old one implemented in the pileup
command, but the details are handled more carefully both in theory and
in practice. As a result, the new indel caller usually gives more
accurate indel calls, though at the cost of sensitivity. The caller is
implemented in the mpileup command and is invoked by default. It works
with multiple samples.

Other notable changes:

 * With the -r option, the calmd command writes the difference between
   the original base quality and the BAQ capped base quality at the BQ
   tag but does not modify the base quality. Please use -Ar to overwrite
   the original base quality (the 0.1.9 behavior).

 * Allow to set a maximum per-sample read depth to reduce memory. In
   0.1.9, most of memory is wasted for the ultra high read depth in some
   regions (e.g. the chr1 centromere).

 * Optionally write per-sample read depth and per-sample strand bias
   P-value.

 * Compute equal-tail (Bayesian) credible interval of site allele
   frequency at the CI95 VCF annotation.

 * Merged the vcfutils.pl varFilter and filter4vcf for better SNP/indel
   filtering.

(0.1.10: 16 November 2010, r829)



Beta Release 0.1.9 (27 October, 2010)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This release is featured as the first major improvement to the samtools'
SNP caller.  It comes with a revised MAQ error model, the support of
multi-sample SNP calling and the computation of base alignment quality
(BAQ).

The revised MAQ error model is based on the original model. It solves an
issue of miscalling SNPs in repetitive regions. Althought such SNPs can
usually be filtered at a later step, they mess up unfiltered calls. This
is a theoretical flaw in the original model. The revised MAQ model
deprecates the orginal MAQ model and the simplified SOAPsnp model.

Multi-sample SNP calling is separated in two steps. The first is done by
samtools mpileup and the second by a new program, bcftools, which is
included in the samtools source code tree. Multi-sample SNP calling also
works for single sample and has the advantage of enabling more powerful
filtration. It is likely to deprecate pileup in future once a proper
indel calling method is implemented.

BAQ is the Phred-scaled probability of a read base being wrongly
aligned. Capping base quality by BAQ has been shown to be very effective
in suppressing false SNPs caused by misalignments around indels or in
low-complexity regions with acceptable compromise on computation
time. This strategy is highly recommended and can be used with other SNP
callers as well.

In addition to the three major improvements, other notable changes are:

 * Changes to the pileup format. A reference skip (the N CIGAR operator)
   is shown as '<' or '>' depending on the strand. Tview is also changed
   accordingly.

 * Accelerated pileup. The plain pileup is about 50% faster.

 * Regional merge. The merge command now accepts a new option to merge
   files in a specified region.

 * Fixed a bug in bgzip and razip which causes source files to be
   deleted even if option -c is applied.

 * In APIs, propogate errors to downstream callers and make samtools
   return non-zero values once errors occur.

(0.1.9: 27 October 2010, r783)



Beta Release 0.1.8 (11 July, 2010)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable functional changes:

 * Added the `reheader' command which replaces a BAM header with a new
   header. This command is much faster than replacing header by
   BAM->SAM->BAM conversions.

 * Added the `mpileup' command which computes the pileup of multiple
   alignments.

 * The `index' command now stores the number of mapped and unmapped
   reads in the index file. This information can be retrieved quickly by
   the new `idxstats' command.

 * By default, pileup used the SOAPsnp model for SNP calling. This
   avoids the floating overflow in the MAQ model which leads to spurious
   calls in repetitive regions, although these calls will be immediately
   filtered by varFilter.

 * The `tview' command now correctly handles CIGARs like 7I10M and
   10M1P1I10M which cause assertion failure in earlier versions.

 * Tview accepts a region like `=10,000' where `=' stands for the
   current sequence name. This saves typing for long sequence names.

 * Added the `-d' option to `pileup' which avoids slow indel calling
   in ultradeep regions by subsampling reads locally.

 * Added the `-R' option to `view' which retrieves alignments in read
   groups listed in the specified file.

Performance improvements:

 * The BAM->SAM conversion is up to twice faster, depending on the
   characteristic of the input.

 * Parsing SAM headers with a lot of reference sequences is now much
   faster.

 * The number of lseek() calls per query is reduced when the query
   region contains no read alignments.

Bug fixes:

 * Fixed an issue in the indel caller that leads to miscall of indels.
   Note that this solution may not work well when the sequencing indel
   error rate is higher than the rate of SNPs.

 * Fixed another issue in the indel caller which may lead to incorrect
   genotype.

 * Fixed a bug in `sort' when option `-o' is applied.

 * Fixed a bug in `view -r'.

APIs and other changes:

 * Added iterator interfaces to random access and pileup. The callback
   interfaces directly call the iterator interfaces.

 * The BGZF blocks holding the BAM header are indepedent of alignment
   BGZF blocks. Alignment records shorter than 64kB is guaranteed to be
   fully contained in one BGZF block. This change is fully compatible
   with the old version of samtools/picard.

Changes in other utilities:

 * Updated export2sam.pl by Chris Saunders.

 * Improved the sam2vcf.pl script.

 * Added a Python version of varfilter.py by Aylwyn Scally.

(0.1.8: 11 July 2010, r613)



Beta Release 0.1.7 (10 November, 2009)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes:

 * Improved the indel caller in complex scenariors, in particular for
   long reads. The indel caller is now able to make reasonable indel
   calls from Craig Venter capillary reads.

 * Rewrote single-end duplicate removal with improved
   performance. Paired-end reads are not touched.

 * Duplicate removal is now library aware. Samtools remove potential
   PCR/optical dupliates inside a library rather than across libraries.

 * SAM header is now fully parsed, although this functionality is not
   used in merging and so on.

 * In samtools merge, optionally take the input file name as RG-ID and
   attach the RG tag to each alignment.

 * Added FTP support in the RAZF library. RAZF-compressed reference
   sequence can be retrieved remotely.

 * Improved network support for Win32.

 * Samtools sort and merge are now stable.

Changes in other utilities:

 * Implemented sam2vcf.pl that converts the pileup format to the VCF
   format.

 * This release of samtools is known to work with the latest
   Bio-Samtools Perl module.

(0.1.7: 10 November 2009, r510)



Beta Release 0.1.6 (2 September, 2009)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes:

 * In tview, do not show a blank screen when no reads mapped to the
   corresponding region.

 * Implemented native HTTP support in the BGZF library. Samtools is now
   able to directly open a BAM file on HTTP. HTTP proxy is also
   supported via the "http_proxy" environmental variable.

 * Samtools is now compitable with the MinGW (win32) compiler and the
   PDCurses library.

 * The calmd (or fillmd) command now calculates the NM tag and replaces
   MD tags if they are wrong.

 * The view command now recognizes and optionally prints FLAG in HEXs or
   strings to make a SAM file more friendly to human eyes. This is a
   samtools-C extension, not implemented in Picard for the time
   being. Please type `samtools view -?' for more information.

 * BAM files now have an end-of-file (EOF) marker to facilitate
   truncation detection. A warning will be given if an on-disk BAM file
   does not have this marker. The warning will be seen on BAM files
   generated by an older version of samtools. It does NO harm.

 * New key bindings in tview: `r' to show read names and `s' to show
   reference skip (N operation) as deletions.

 * Fixed a bug in `samtools merge -n'.

 * Samtools merge now optionally copies the header of a user specified
   SAM file to the resultant BAM output.

 * Samtools pileup/tview works with a CIGAR with the first or the last
   operation is an indel.

 * Fixed a bug in bam_aux_get().


Changes in other utilies:

 * Fixed wrong FLAG in maq2sam.


(0.1.6: 2 September 2009, r453)



Beta Release 0.1.5 (7 July, 2009)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes:

 * Support opening a BAM alignment on FTP. Users can now use "tview" to
   view alignments at the NCBI ftp site. Please read manual for more
   information.

 * In library, propagate errors rather than exit or complain assertion
   failure.

 * Simplified the building system and fixed compiling errors caused by
   zlib<1.2.2.1.

 * Fixed an issue about lost header information when a SAM is imported
   with "view -t".

 * Implemented "samtool.pl varFilter" which filters both SNPs and short
   indels. This command replaces "indelFilter".

 * Implemented "samtools.pl pileup2fq" to generate FASTQ consensus from
   pileup output.

 * In pileup, cap mapping quality at 60. This helps filtering when
   different aligners are in use.

 * In pileup, allow to output variant sites only.

 * Made pileup generate correct calls in repetitive region. At the same
   time, I am considering to implement a simplified model in SOAPsnp,
   although this has not happened yet.

 * In view, added '-u' option to output BAM without compression. This
   option is preferred when the output is piped to other commands.

 * In view, added '-l' and '-r' to get the alignments for one library or
   read group. The "@RG" header lines are now partially parsed.

 * Do not include command line utilities to libbam.a.

 * Fixed memory leaks in pileup and bam_view1().

 * Made faidx more tolerant to empty lines right before or after FASTA >
   lines.


Changes in other utilities:

 * Updated novo2sam.pl by Colin Hercus, the key developer of novoalign.


This release involves several modifications to the key code base which
may potentially introduce new bugs even though we have tried to minimize
this by testing on several examples. Please let us know if you catch
bugs.

(0.1.5: 7 July 2009, r373)



Beta Release 0.1.4 (21 May, 2009)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes:

 * Added the 'rmdupse' command: removing duplicates for SE reads.

 * Fixed a critical bug in the indel caller: clipped alignments are not
   processed correctly.

 * Fixed a bug in the tview: gapped alignment may be incorrectly
   displayed.

 * Unified the interface to BAM and SAM I/O. This is done by
   implementing a wrapper on top of the old APIs and therefore old APIs
   are still valid. The new I/O APIs also recognize the @SQ header
   lines.

 * Generate the MD tag.

 * Generate "=" bases. However, the indel caller will not work when "="
   bases are present.

 * Enhanced support of color-read display (by Nils Homer).

 * Implemented the GNU building system. However, currently the building
   system does not generate libbam.a. We will improve this later. For
   the time being, `make -f Makefile.generic' is preferred.

 * Fixed a minor bug in pileup: the first read in a chromosome may be
   skipped.

 * Fixed bugs in bam_aux.c. These bugs do not affect other components as
   they were not used previously.

 * Output the 'SM' tag from maq2sam.

(0.1.4: 21 May 2009, r297)



Beta Release 0.1.3 (15 April, 2009)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes in SAMtools:

 * SAMtools is more consistent with the specification: a) '*' in the
   QUAL field is allowed; b) the field separator is TAB only and SPACE
   is treated as a character in a field; c) empty header is allowed.

 * Implemented GLFv3 support in pileup.

 * Fixed a severe bug in fixmate: strand information is wrongly
   overwritten.

 * Fixed a bug in alignment retrieval: alignments bridging n*16384bp are
   not correctly retrieved sometimes.

 * Fixed a bug in rmdup: segfault if unmapped reads are present.

 * Move indel_filter.pl to samtools.pl and improved the filtering by
   checking the actual number of alignments containing indels. The indel
   pileup line is also changed a little to make this filtration easier.

 * Fixed a minor bug in indexing: the bin number of an unmapped read is
   wrongly calculated.

 * Added `flagstat' command to show statistics on the FLAG field.

 * Improved indel caller by setting the maximum window size in local
   realignment.

Changes in other utilities:

 * Fixed a bug in maq2sam: a tag name is obsolete.

 * Improvement to wgsim: a) added support for SOLiD read simulation; b)
   show the number of substitutions/indels/errors in read name; c)
   considerable code clean up.

 * Various converters: improved functionality in general.

 * Updated the example SAM due to the previous bug in fixmate.

(0.1.3: 15 April 2009, r227)



Beta Release 0.1.2 (28 January, 2008)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Notable changes in SAMtools:

 * Implemented a Bayesian indel caller. The new caller generate scores
   and genotype and is potentially more accurate than Maq's indel
   caller. The pileup format is also changed accordingly.

 * Implemented rmdup command: remove potential PCR duplicates. Note that
   this command ONLY works for FR orientation and requires ISIZE is
   correctly set.

 * Added fixmate command: fill in mate coordinates, ISIZE and mate
   related flags from a name-sorted alignment.

 * Fixed a bug in indexing: reads bridging 16x kbp were not retrieved.

 * Allow to select reads shown in the pileup output with a mask.

 * Generate GLFv2 from pileup.

 * Added two more flags for flagging PCR/optical duplicates and for QC
   failure.

 * Fixed a bug in sort command: name sorting for large alignment did not
   work.

 * Allow to completely disable RAZF (using Makefile.lite) as some people
   have problem to compile it.

 * Fixed a bug in import command when there are reads without
   coordinates.

 * Fixed a bug in tview: clipping broke the alignment viewer.

 * Fixed a compiling error when _NO_CURSES is applied.

 * Fixed a bug in merge command.

Changes in other utilities:

 * Added wgsim, a paired-end reads simulator. Wgsim was adapted from
   maq's reads simulator. Colin Hercus further improved it to allow
   longer indels.

 * Added wgsim_eval.pl, a script that evaluates the accuracy of
   alignment on reads generated by wgsim.

 * Added soap2sam.pl, a SOAP2->SAM converter. This converter does not
   work properly when multiple hits are output.

 * Added bowtie2sam.pl, a Bowtie->SAM converter. Only the top hit will
   be retained when multiple hits are present.

 * Fixed a bug in export2sam.pl for QC reads.

 * Support RG tag at MAQ->SAM converter.

 * Added novo2sam.pl, a NovoAlign->SAM converter. Multiple hits and
   indel are not properly handled, though.

 * Added zoom2sam.pl, a ZOOM->SAM converter. It only works with the
   default Illumina output.

(0.1.2: 28 January 2008; r116)



Beta Release 0.1.1 (22 December, 2008)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The is the first public release of samtools. For more information,
please check the manual page `samtools.1' and the samtools website
http://samtools.sourceforge.net