EXECIO MODULE is not transient

[g4ugm]

The documentation states that EXECIO runs in the transient area, but its gened as a normal module that loads at 020000.

[marXtevens]

Can NUCXTEXT MODULE be used as a work-around? Since DMSXIO TEXT exists on

Label  CUU M  Stat  Cyl Type Blksize   Files  Blks Used-(%) Blks Left  Blk Total
CMSDSK 190 I/A R/O   59 3350  800        534      19828-59      13802      33630

It could be renamed from I1 (or S1) to I2 (or S2), and the CMS segment be resaved.

XLIST: DMSXIO * *                                     Lines 1-7/7  XLIST V1.2.5
  Filename Filetype Fm  Format    Recs Blocks  Date       Time   Label
  DMSXIO   ASSEMBLE F1  F    80   2509    251  2020-12-15 08:41  MNT093
  DMSXIO   AUXHRC   F1  F    80      3      1  2021-12-11 16:01  MNT093
  DMSXIO   HRC411DS F1  F    80      1      1  2020-12-15 08:43  MNT093
  DMSXIO   HRC428DS F1  F    80      4      1  2021-11-30 12:21  MNT093
  DMSXIO   HRC429DS F1  F    80     11      2  2021-12-11 16:02  MNT093
  DMSXIO   TEXT     F1  F    80    154     16  2021-12-11 16:02  MNT093
  DMSXIO   TEXT     I1  F    80    147     15  2021-03-08 22:42  CMSDSK

And then NUCXTEXT DMSXIO be issued to make it a nucleus exension?

Use the NUCXTEXT command to install a CMS TEXT object code file as a Nucleus   
Extension. External references in the TEXT file can be resolved from a library 
specified in a GLOBAL TXTLIB list.                                             
                                                                               
+----------+------------------------------------------------------------------+
| NUCXTEXT | name                                                             |
|          |                                                                  |
|          | options:                                                         |
|          | SYSTEM   SERVICE  PERMANENT ENDCMD PUSH                          |
|          |                                                                  |
+----------+------------------------------------------------------------------+

Might need to rename the deck to EXECIO TEXT for it to be found?

[marXtevens]

I think this shows that copying DMSXIO TEXT I1 to EXECIO TEXT S2, resaving CMS, & NUCXTEXT EXECIO works.

type profile exec a
 
&CONTROL OFF
* ACCESS MAINT TOOLS DISK
ACCESS 5E5 B/B
 
* Add any customizations for maint after this line.
************************************************************************
* Program Function (PF) Definitions
************************************************************************
CP SET PF01 IMMED   HELP
CP SET PF02 IMMED   EXEC WHOAMI
CP SET PF03 DELAYED LOGOFF
CP SET PF04
CP SET PF05
CP SET PF06
CP SET PF07
CP SET PF08
CP SET PF09 IMMED   RETRIEVE
CP SET PF10
CP SET PF11
CP SET PF12 IMMED   RETRIEVE
CP SET PF13 IMMED   HELP
CP SET PF14
CP SET PF15
CP SET PF16
CP SET PF17
CP SET PF18
CP SET PF19
CP SET PF20
CP SET PF21
CP SET PF22
CP SET PF23
CP SET PF24
 
Ready; T=0.01/0.02 13:41:58

type tstxio exec a
 
/* REXX */
ADDRESS 'COMMAND'
 
'EXECIO * DISKR PROFILE EXEC A ( LOCATE /5E5/ STEM LINE.'
 
I = 0 ;
SAY 'FOUND' LINE.0 'LINE(S).' ;
DO WHILE I < LINE.0
   I = I + 1 ;
   SAY LINE.I ;
END
RETURN
 
Ready; T=0.01/0.01 13:42:21

The following uses EXECIO MODULE. Then I swap out the MODULE for the TEXT.

tstxio
FOUND 2 LINE(S).
ACCESS 5E5 B/B
         3          3
Ready; T=0.02/0.03 13:42:37

l execio * * ( date
Filename Filetype Fm  Format    Recs Blocks     Date    Time
EXECIO   MODULE   S2  V  7296      2     10  06/12/22   13:42
EXECIO   HELP$CM  U2  F    80    853     86  07/06/22   21:43
Ready; T=0.01/0.01 13:42:58

CP DEFINE STORAGE 16M
STORAGE = 16384K
CP ENTERED; DISABLED WAIT PSW '00020000 00000000'
IPL 190 CLEAR
VM Community Edition V1 R1.2
savesys cms
SYSTEM SAVED
VM Community Edition V1 R1.2
 
CP DEFINE STORAGE 15M
STORAGE = 15360K
CP ENTERED; DISABLED WAIT PSW '00020000 00000000'
IPL CMS PARM AUTOCR
VM Community Edition V1 R1.2
Y (19E) R/O
U (19D) R/O
B (5E5) R/O
Ready; T=0.01/0.01 13:44:59

The MODULE is no longer visible, just the TEXT deck, and the program behaves the same.

l execio * * ( date
Filename Filetype Fm  Format    Recs Blocks     Date    Time
EXECIO   TEXT     S2  F    80    154     16  02/07/26   13:44
EXECIO   HELP$CM  U2  F    80    853     86  07/06/22   21:43
Ready; T=0.01/0.01 13:45:14
nucxmap
Name      Entry    Userword Origin   Bytes   Amode (Attributes)
GCCLIB    00F20000 00000000 00000000 0001D000   24 SYSTEM           
PERM
Ready; T=0.01/0.01 13:45:31
nucxtext execio ( system
Ready; T=0.01/0.01 13:45:40
nucxmap
Name      Entry    Userword Origin   Bytes   Amode (Attributes)
EXECIO    000090B0 00000000 000090B0 00001C80   24 SYSTEM
GCCLIB    00F20000 00000000 00000000 0001D000   24 SYSTEM           
PERM
Ready; T=0.01/0.01 13:45:42

tstxio
FOUND 2 LINE(S).
ACCESS 5E5 B/B
         3          3
Ready; T=0.02/0.02 13:46:07