Implement Radiation detector hardware

[simon987]

The radiation detection hardware (Geiger counter ?) will give a Count per minute based on the distance from a Radioactive obstacle. Multiple radioactive obstacles close together will give a greater number.

[simon987]

More info on radiation and mesurments:

• Geiger Mueller (GM) tube sensing element. are used in most Portable Hand Held Survey Detectors to locate radiation. They detect alpha, beta, X-rays and gamma radiation.
• Becquerel is the strength of the source of radiation, cpm is the number of counts received by an instrument from that source.
• Activity (quantity) is measured in Becquerel (also Curies in the U.S.). 1 Becquerel (Bq) = 1 disintegration per second (dps)
• Normal background radiation levels vary at different locations, even in different areas of the same room
• Alpha: ±5cm
• Beta: 10-20 feet, penetrates paper
• Gamma: 100+ feet, stops with tick concrete / lead

I'm not skilled enough to implement a realistic solution so what I'll do is that I will calculate the path in a straight line from the Cubot to the radioactive object, then use the object's getCounts(lenght of the path) and substract a set amount for each impassable object/tile in the path.