Merge pull request #1890 from fpistm/STM32WL_update2

Update HAL and CMSIS drivers to STM32CubeWL 1.3.0

Author: fpistm

cores/arduino/stm32/stm32_def_build.h

@@ -446,6 +446,10 @@
     #define CMSIS_STARTUP_FILE "startup_stm32wl55xx_cm0plus.s"
   #elif defined(STM32WL55xx) && defined(USE_CM4_STARTUP_FILE)
     #define CMSIS_STARTUP_FILE "startup_stm32wl55xx_cm4.s"
+  #elif defined(STM32WL5Mxx) && defined(USE_CM0PLUS_STARTUP_FILE)
+    #define CMSIS_STARTUP_FILE "startup_stm32wl5mxx_cm0plus.s"
+  #elif defined(STM32WL5Mxx) && defined(USE_CM4_STARTUP_FILE)
+    #define CMSIS_STARTUP_FILE "startup_stm32wl5mxx_cm4.s"
   #elif defined(STM32WLE4xx)
     #define CMSIS_STARTUP_FILE "startup_stm32wle4xx.s"
   #elif defined(STM32WLE5xx)

system/Drivers/CMSIS/Device/ST/STM32WLxx/Include/stm32wl54xx.h

@@ -8,15 +8,15 @@
   *          is using in the C source code, usually in main.c. This file contains:
   *           - Configuration section that allows to select:
   *              - The STM32WLxx device used in the target application
-  *              - To use or not the peripheral’s drivers in application code(i.e.
-  *                code will be based on direct access to peripheral’s registers
+  *              - To use or not the peripheral's drivers in application code(i.e.
+  *                code will be based on direct access to peripheral's registers
   *                rather than drivers API), this option is controlled by
   *                "#define USE_HAL_DRIVER"
   *
   ******************************************************************************
   * @attention
   *
-  * Copyright (c) 2020(-2021) STMicroelectronics.
+  * Copyright (c) 2020-2021 STMicroelectronics.
   * All rights reserved.
   *
   * This software is licensed under terms that can be found in the LICENSE file
@@ -56,12 +56,13 @@
    application
   */
 
-#if !defined (STM32WL55xx) && !defined (STM32WL54xx) && !defined (STM32WLE5xx) && !defined (STM32WLE4xx)
+#if !defined (STM32WL55xx) && !defined (STM32WL54xx) && !defined (STM32WLE5xx) && !defined (STM32WLE4xx) && !defined(STM32WL5Mxx)
   /* #define STM32WL55xx */   /*!< STM32WL55xx Devices */
   /* #define STM32WL54xx */   /*!< STM32WL54xx Devices */
   /* #define STM32WLE5xx */   /*!< STM32WLE5xx Devices */
   /* #define STM32WLE4xx */   /*!< STM32WLE4xx Devices */
-#endif
+  /* #define STM32WL5Mxx */   /*!< STM32WL5Mxx Devices */
+#endif /* STM32WL55xx ... */
 
 /*  Tip: To avoid modifying this file each time you need to switch between these
         devices, you can define the device in your toolchain compiler preprocessor.
@@ -79,7 +80,7 @@
   * @brief CMSIS Device version number
   */
 #define __STM32WLxx_CMSIS_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
-#define __STM32WLxx_CMSIS_VERSION_SUB1   (0x01U) /*!< [23:16] sub1 version */
+#define __STM32WLxx_CMSIS_VERSION_SUB1   (0x02U) /*!< [23:16] sub1 version */
 #define __STM32WLxx_CMSIS_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
 #define __STM32WLxx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32WLxx_CMSIS_DEVICE_VERSION        ((__STM32WLxx_CMSIS_VERSION_MAIN << 24)\
@@ -103,9 +104,11 @@
   #include "stm32wl54xx.h"
 #elif defined(STM32WLE4xx)
   #include "stm32wle4xx.h"
+#elif defined(STM32WL5Mxx)
+  #include "stm32wl5mxx.h"
 #else
  #error "Please select first the target STM32WLxx device used in your application, for instance xxx (in stm32wlxx.h file)"
-#endif
+#endif /* STM32WL55xx ... */
 
 /**
   * @}
@@ -275,8 +278,3 @@ typedef enum
 /**
   * @}
   */
-
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/CMSIS/Device/ST/STM32WLxx/Include/stm32wl55xx.h

@@ -6,7 +6,7 @@
   ******************************************************************************
   * @attention
   *
-  * Copyright (c) 2020(-2021) STMicroelectronics.
+  * Copyright (c) 2020-2021 STMicroelectronics.
   * All rights reserved.
   *
   * This software is licensed under terms that can be found in the LICENSE file
@@ -103,4 +103,3 @@ extern void SystemCoreClockUpdate(void);
 /**
   * @}
   */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/CMSIS/Device/ST/STM32WLxx/Include/stm32wl5mxx.h

@@ -1,7 +1,5 @@
 # STM32CubeWL CMSIS Device MCU Component
 
-![latest tag](https://img.shields.io/github/v/tag/STMicroelectronics/cmsis_device_wl.svg?color=brightgreen)
-
 ## Overview
 
 **STM32Cube** is an STMicroelectronics original initiative to ease the developers life by reducing efforts, time and cost.
@@ -27,17 +25,11 @@ Details about the content of this release are available in the release note [her
 
 ## Compatibility information
 
-In this table, you can find the successive versions of this CMSIS Device component, in-line with the corresponding versions of the full MCU package:
-
-CMSIS Device WL | CMSIS Core | Was delivered in the full MCU package
---------------- | ---------- | -------------------------------------
-Tag v1.0.0 | Tag v5.6.0_cm4 | Tag v1.0.0
-Tag v1.1.0 | Tag v5.6.0_cm4 | Tag v1.1.0
-
+It is **crucial** that you use a consistent set of versions for the CMSIS Core - CMSIS Device, as mentioned in [this](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/STM32CubeWL/blob/main/Release_Notes.html) release note.
 
 The full **STM32CubeWL** MCU package is available [here](https://github.com/STMicroelectronics/STM32CubeWL).
 
 ## Troubleshooting
 If you have any issue with the **Software content** of this repo, you can [file an issue on Github](https://github.com/STMicroelectronics/cmsis_device_wl/issues/new).
 
-For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/topic/0TO0X000000BSqSWAW/stm32-mcus).
+For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).

system/Drivers/CMSIS/Device/ST/STM32WLxx/Include/stm32wle4xx.h

@@ -34,6 +34,7 @@ <h1 id="purpose">Purpose</h1>
 <li>STM32WL54xx devices</li>
 <li>STM32WLE5xx devices</li>
 <li>STM32WLE4xx devices</li>
+<li>STM32WL5Mxx devices</li>
 </ul>
 <p>This driver is composed of the descriptions of the registers under “Include” directory.</p>
 <p>Various template file are provided to easily build an application. They can be adapted to fit applications requirements.</p>
@@ -46,10 +47,42 @@ <h1 id="purpose">Purpose</h1>
 <div class="col-sm-12 col-lg-8">
 <h1 id="update-history">Update History</h1>
 <div class="collapse">
-<input type="checkbox" id="collapse-section2" checked aria-hidden="true"> <label for="collapse-section2" aria-hidden="true"><strong>V1.1.0 / 16-June-2021</strong></label>
+<input type="checkbox" id="collapse-section4" checked aria-hidden="true"> <label for="collapse-section4" aria-hidden="true"><strong>V1.2.0 / 09-November-2022</strong></label>
 <div>
 <h2 id="main-changes">Main Changes</h2>
 <ul>
+<li>Add new device STM32WL5Mxx</li>
+<li>Rename ADC_TRx to ADC_AWDxTR to match with Reference Manual</li>
+<li>Fix inconsistent IRQn_Type enumeration for supervisor call exception with alias for compatibility</li>
+</ul>
+<h2 id="known-limitations">Known Limitations</h2>
+<p>None</p>
+<h2 id="dependencies">Dependencies</h2>
+<p>None</p>
+<h2 id="notes">Notes</h2>
+<p>None</p>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true"><strong>V1.1.1 / 4-February-2022</strong></label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
+<ul>
+<li>All source files and templates: update disclaimer to add reference to the new license agreement</li>
+</ul>
+<h2 id="known-limitations-1">Known Limitations</h2>
+<p>None</p>
+<h2 id="dependencies-1">Dependencies</h2>
+<p>None</p>
+<h2 id="notes-1">Notes</h2>
+<p>None</p>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true"><strong>V1.1.0 / 16-June-2021</strong></label>
+<div>
+<h2 id="main-changes-2">Main Changes</h2>
+<ul>
 <li>Add atomic register access services:
 <ul>
 <li>32-bit register access: ATOMIC_SET_BIT(), ATOMIC_CLEAR_BIT(), ATOMIC_MODIFY_REG()</li>
@@ -58,26 +91,26 @@ <h2 id="main-changes">Main Changes</h2>
 <li>Add define LSI_STARTUP_TIME used in default IWDG timeout calculation (HAL_IWDG_DEFAULT_TIMEOUT)</li>
 <li>Add reference to user manual for customization of CubeIDE linker files</li>
 </ul>
-<h2 id="known-limitations">Known Limitations</h2>
+<h2 id="known-limitations-2">Known Limitations</h2>
 <p>None</p>
-<h2 id="dependencies">Dependencies</h2>
+<h2 id="dependencies-2">Dependencies</h2>
 <p>None</p>
-<h2 id="notes">Notes</h2>
+<h2 id="notes-2">Notes</h2>
 <p>None</p>
 </div>
 </div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true"><strong>V1.0.0 / 28-October-2020</strong></label>
 <div>
-<h2 id="main-changes-1">Main Changes</h2>
+<h2 id="main-changes-3">Main Changes</h2>
 <p><strong>First Official Release</strong></p>
 <h2 id="contents">Contents</h2>
 <p>First official release of CMSIS drivers for STM32WLxx lines</p>
-<h2 id="known-limitations-1">Known Limitations</h2>
+<h2 id="known-limitations-3">Known Limitations</h2>
 <p>None</p>
-<h2 id="dependencies-1">Dependencies</h2>
+<h2 id="dependencies-3">Dependencies</h2>
 <p>None</p>
-<h2 id="notes-1">Notes</h2>
+<h2 id="notes-3">Notes</h2>
 <p>None</p>
 </div>
 </div>