Skip to content

Commit a578c0b

Browse files
ABOSTMABOSTM
authored
Add support of NUCLEO_L433RC_P (#918)
1 parent 1043594 commit a578c0b

File tree

6 files changed

+865
-0
lines changed

6 files changed

+865
-0
lines changed

‎boards.txt

Lines changed: 13 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -343,6 +343,19 @@ Nucleo_64.menu.pnum.NUCLEO_L152RE.build.product_line=STM32L152xE
343343
Nucleo_64.menu.pnum.NUCLEO_L152RE.build.variant=NUCLEO_L152RE
344344
Nucleo_64.menu.pnum.NUCLEO_L152RE.build.cmsis_lib_gcc=arm_cortexM3l_math
345345

346+
# NUCLEO_L433RC_P board
347+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P=Nucleo L433RC-P
348+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.node=NODE_L433RC
349+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.upload.maximum_size=1048576
350+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.upload.maximum_data_size=98304
351+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.build.mcu=cortex-m4
352+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
353+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.build.board=NUCLEO_L433RC
354+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.build.series=STM32L4xx
355+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.build.product_line=STM32L433xx
356+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.build.variant=NUCLEO_L433RC_P
357+
Nucleo_64.menu.pnum.NUCLEO_L433RC_P.build.cmsis_lib_gcc=arm_cortexM4lf_math
358+
346359
# NUCLEO_L452RE board
347360
Nucleo_64.menu.pnum.NUCLEO_L452RE=Nucleo L452RE
348361
Nucleo_64.menu.pnum.NUCLEO_L452RE.node=NODE_L452RE

‎variants/NUCLEO_L433RC_P/PeripheralPins.c

Lines changed: 285 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,285 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
* Automatically generated from STM32L433RCTxP.xml
13+
*/
14+
#include "Arduino.h"
15+
#include "PeripheralPins.h"
16+
17+
/* =====
18+
* Note: Commented lines are alternative possibilities which are not used per default.
19+
* If you change them, you will have to know what you do
20+
* =====
21+
*/
22+
23+
//*** ADC ***
24+
25+
#ifdef HAL_ADC_MODULE_ENABLED
26+
WEAK const PinMap PinMap_ADC[] = {
27+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
28+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
29+
// {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 - STLink TX
30+
// {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 - STLink_RX
31+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
32+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
33+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
34+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
35+
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
36+
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
37+
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
38+
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
39+
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
40+
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
41+
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
42+
{NC, NP, 0}
43+
};
44+
#endif
45+
46+
//*** DAC ***
47+
48+
#ifdef HAL_DAC_MODULE_ENABLED
49+
WEAK const PinMap PinMap_DAC[] = {
50+
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
51+
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
52+
{NC, NP, 0}
53+
};
54+
#endif
55+
56+
//*** I2C ***
57+
58+
#ifdef HAL_I2C_MODULE_ENABLED
59+
WEAK const PinMap PinMap_I2C_SDA[] = {
60+
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
61+
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
62+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
63+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
64+
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
65+
{PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
66+
{PC_1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
67+
{NC, NP, 0}
68+
};
69+
#endif
70+
71+
#ifdef HAL_I2C_MODULE_ENABLED
72+
WEAK const PinMap PinMap_I2C_SCL[] = {
73+
{PA_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
74+
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
75+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
76+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
77+
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
78+
{PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
79+
{PC_0, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
80+
{NC, NP, 0}
81+
};
82+
#endif
83+
84+
//*** PWM ***
85+
86+
#ifdef HAL_TIM_MODULE_ENABLED
87+
WEAK const PinMap PinMap_PWM[] = {
88+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
89+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
90+
// {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
91+
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - STLink TX
92+
// {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)}, // TIM15_CH1 - STLink TX
93+
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - STLink_RX
94+
// {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2 - STLink_RX
95+
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
96+
{PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
97+
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
98+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
99+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
100+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
101+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
102+
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
103+
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
104+
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
105+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
106+
{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
107+
{PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
108+
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
109+
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
110+
// {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
111+
{PB_13, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
112+
// {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
113+
{PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)}, // TIM15_CH1
114+
// {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
115+
{PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2
116+
{NC, NP, 0}
117+
};
118+
#endif
119+
120+
//*** SERIAL ***
121+
122+
#ifdef HAL_UART_MODULE_ENABLED
123+
WEAK const PinMap PinMap_UART_TX[] = {
124+
{PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // STLink TX
125+
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // STLink TX
126+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
127+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
128+
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
129+
{PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
130+
{PC_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
131+
{PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
132+
{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
133+
{NC, NP, 0}
134+
};
135+
#endif
136+
137+
#ifdef HAL_UART_MODULE_ENABLED
138+
WEAK const PinMap PinMap_UART_RX[] = {
139+
{PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // STLink_RX
140+
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // STLink_RX
141+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
142+
{PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
143+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
144+
{PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
145+
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
146+
{PC_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
147+
{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
148+
{NC, NP, 0}
149+
};
150+
#endif
151+
152+
#ifdef HAL_UART_MODULE_ENABLED
153+
WEAK const PinMap PinMap_UART_RTS[] = {
154+
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
155+
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
156+
{PA_15, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
157+
// {PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
158+
{PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
159+
{PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
160+
{PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
161+
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
162+
{NC, NP, 0}
163+
};
164+
#endif
165+
166+
#ifdef HAL_UART_MODULE_ENABLED
167+
WEAK const PinMap PinMap_UART_CTS[] = {
168+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
169+
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
170+
// {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
171+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
172+
{PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
173+
// {PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
174+
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
175+
{NC, NP, 0}
176+
};
177+
#endif
178+
179+
//*** SPI ***
180+
181+
#ifdef HAL_SPI_MODULE_ENABLED
182+
WEAK const PinMap PinMap_SPI_MOSI[] = {
183+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
184+
{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
185+
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
186+
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
187+
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
188+
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
189+
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
190+
{NC, NP, 0}
191+
};
192+
#endif
193+
194+
#ifdef HAL_SPI_MODULE_ENABLED
195+
WEAK const PinMap PinMap_SPI_MISO[] = {
196+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
197+
{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
198+
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
199+
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
200+
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
201+
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
202+
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
203+
{NC, NP, 0}
204+
};
205+
#endif
206+
207+
#ifdef HAL_SPI_MODULE_ENABLED
208+
WEAK const PinMap PinMap_SPI_SCLK[] = {
209+
{PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
210+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
211+
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
212+
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
213+
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
214+
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
215+
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
216+
{NC, NP, 0}
217+
};
218+
#endif
219+
220+
#ifdef HAL_SPI_MODULE_ENABLED
221+
WEAK const PinMap PinMap_SPI_SSEL[] = {
222+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
223+
// {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
224+
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
225+
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
226+
{PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
227+
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
228+
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
229+
{NC, NP, 0}
230+
};
231+
#endif
232+
233+
//*** CAN ***
234+
235+
#ifdef HAL_CAN_MODULE_ENABLED
236+
WEAK const PinMap PinMap_CAN_RD[] = {
237+
{PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
238+
{PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
239+
{NC, NP, 0}
240+
};
241+
#endif
242+
243+
#ifdef HAL_CAN_MODULE_ENABLED
244+
WEAK const PinMap PinMap_CAN_TD[] = {
245+
{PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
246+
{PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
247+
{NC, NP, 0}
248+
};
249+
#endif
250+
251+
//*** No ETHERNET ***
252+
253+
//*** QUADSPI ***
254+
255+
#ifdef HAL_QSPI_MODULE_ENABLED
256+
WEAK const PinMap PinMap_QUADSPI[] = {
257+
// {PA_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS - STLink TX
258+
// {PA_3, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK - STLink_RX
259+
{PA_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO3
260+
{PA_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO2
261+
{PB_0, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
262+
{PB_1, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
263+
{PB_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
264+
{PB_11, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
265+
{NC, NP, 0}
266+
};
267+
#endif
268+
269+
//*** USB ***
270+
271+
#ifdef HAL_PCD_MODULE_ENABLED
272+
WEAK const PinMap PinMap_USB[] = {
273+
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB_FS)}, // USB_DM
274+
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB_FS)}, // USB_DP
275+
// {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB_FS)}, // USB_NOE
276+
// {PC_9, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB_FS)}, // USB_NOE
277+
{NC, NP, 0}
278+
};
279+
#endif
280+
281+
//*** No USB_OTG_FS ***
282+
283+
//*** No USB_OTG_HS ***
284+
285+
//*** No SD ***

‎variants/NUCLEO_L433RC_P/PinNamesVar.h

Lines changed: 32 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,32 @@
1+
/* SYS_WKUP */
2+
#ifdef PWR_WAKEUP_PIN1
3+
SYS_WKUP1 = PA_0,
4+
#endif
5+
#ifdef PWR_WAKEUP_PIN2
6+
SYS_WKUP2 = PC_13,
7+
#endif
8+
#ifdef PWR_WAKEUP_PIN3
9+
SYS_WKUP3 = PE_6,
10+
#endif
11+
#ifdef PWR_WAKEUP_PIN4
12+
SYS_WKUP4 = PA_2,
13+
#endif
14+
#ifdef PWR_WAKEUP_PIN5
15+
SYS_WKUP5 = PC_5,
16+
#endif
17+
#ifdef PWR_WAKEUP_PIN6
18+
SYS_WKUP6 = NC,
19+
#endif
20+
#ifdef PWR_WAKEUP_PIN7
21+
SYS_WKUP7 = NC,
22+
#endif
23+
#ifdef PWR_WAKEUP_PIN8
24+
SYS_WKUP8 = NC,
25+
#endif
26+
/* USB */
27+
#ifdef USBCON
28+
USB_DM = PA_11,
29+
USB_DP = PA_12,
30+
/* USB_NOE = PA_13, */
31+
/* USB_NOE = PC_9, */
32+
#endif

0 commit comments

Comments
 (0)