Can't start Jamming

[gavakas]

After swapping D2 and D4 and connecting button to RX as suggested in other issues, i managed to make it work. But, although i can navigate between modes i don;t know how to select the desired mode and start jamming. Any help will be much appreciated. Thank you.

[cviper13]

As I'm aware when the text on the screen changes the attack should start automatically if @system-linux haven't made any changes.

[gavakas]

Thank you for your prompt reply. As soon as I choose the WiFi jamm screen, nothing happens. All appliances can still connect to my WiFi and nothing lights up on neither modules ( I don't know if they do have a indicator led). Same with Bluetooth. How should I know that it works? Should my appliances disconnect?

[cviper13]

For bluetooth, they should still show connected (at least thats what happened on my JBL headphones and my phone when @system-linux fired the jammer on) and audio should cut off. Only works for 2.4GHz devices so Airpod Pro series are immune to this attack.

For wifi, I can say that I'm not sure need to ask @system-linux about it.

[Toc2410]

So, I'm having a similar issue. I connected the BUTTON to the RX pin and GND. But when I turn the device on, I get the "Jammer Error" message and then I can switch trough the menus if I press the button, but it wont be jamming anything.
If I switch the wires D2 and D4 I get the freeze screen with te disclaimer warning so I guess they were connected right.

I tried with generic wireless headphones and a speaker but still does not jam anything. I double checked the wires connections and they seem to be connected right. I'm using a 18650 3.7V 3200mAh battery. Any ideas?

[IN0Sc0p3dJFK]

So, I'm having a similar issue. I connected the BUTTON to the RX pin and GND. But when I turn the device on, I get the "Jammer Error" message and then I can switch trough the menus if I press the button, but it wont be jamming anything. If I switch the wires D2 and D4 I get the freeze screen with te disclaimer warning so I guess they were connected right.

I tried with generic wireless headphones and a speaker but still does not jam anything. I double checked the wires connections and they seem to be connected right. I'm using a 18650 3.7V 3200mAh battery. Any ideas?

-- I'm having the same issue, any fix to this?

[nejzjaz-alt]

i have the same problem but when i touch the IRQ pin on the NRF24L01 it works

[Dvmhacker]

i have the same problem but when i touch the IRQ pin on the NRF24L01 it works

It is NRF issue