This repository contains several CRBasic scripts for teaching people how to code Campbell Scientific CR1000 dataloggers using the CRBasic coding language.

Example CRBasic programs for environmental sensors

Scripts to perform event-based sampling using an ISCO autosampler. Water levels are monitored via a Milone Technologies eTape and a Campbell Scientific datalogger is used to record water levels and trigger sampling.

CR3000 datalogger program for Campbell open-path eddy-covariance systems, by @campbell-scientific

Gas analyzer calibration programs for CRBasic-series data loggers

Source code for the CO2 eddy covariance towers at R. J. Cook Agronomy Farm, a USDA ARS Long-Term Agroecosystem Research (LTAR) site

CRBasic program for logging single ATI sonic anemometer

Source and docs for met tower at Asotin landfill, Lewiston-Clarkston Valley Formaldehyde Study (2016-2017)

CRBasic scripts to collect data using the maximum heat ratio method

Campbell Scientific CSBASIC Basic Event Based Email

CRBasic program to log four ATI sonic anemometers (Dr. Edburg Tukey Orchard Pheromone Experiment, 2012)

Small scale plume dispersion study using single methane (CH4) analyzer and 3D anemometer

Simple teaching exercise involving CR1000 datalogger, CSAT3B ultrasonic anemometer and 034B vane-prop anemometer.

Data acquisition for spring 2018 wheat pile dust emissions scoping study

Repository for my work with a Campbell Scientific CR6 data logger in CRBasic for UART communication with a TFmini Plus LiDAR

Custom support software for the CR300 and a specific setup with radiometers at Marambio antarctic base

This repository contains the CRBasic code to run heat-pulse sap flow sensors on a Campbell Scientific CR1000 datalogger. It records both heat-ratio-method and maximum-heat-ratio-method sap flow data. It also contains an R script for processing these data.

Simple WXT520 weather station DAQ using CR1000

Local weather station to support N2O flux trailer