Cut-off Gear Numbers when on a Route

[ken-fyfe]

I have a 5 row by 2 column data page on a Karoo 3. When I'm not on a route, the Ki2 data field shows properly. However, when I add a "nav to start" route, all the native Karoo data fields shift up and get resized (to allow the directions to be shown at the bottom of the screen) - except for the Ki2 data field "GEARS". Instead the GEARS numbers get clipped on the bottom edge as shown in the image below. I have not tried this on data pages with fewer fields and I don't know if this problem is present when a predefined route is initiated at the start of the ride.

[GroteGeer]

@ken-fyfe If I'm looking closely, this is specifically a problem with the 'Gears' datafield. This datafield has 1 mm more space between the text and the numbers. (Just look & compare closely at the neighbor datafield 'Elevation'.) You should report this issue to Hammerhead support so they can correct the spacing.

[valterc]

Will be fixed in the next Ki2 release.

[jpfahler]

Is it possible to integrate the same bike bell sound, available in Version 1.579.2220 (double-tapping the screen with two fingers) into the next update? It's significantly louder than the Ki2 extension.