pi@sediment-pi-zero-w-v1-j:~$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.1.21+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 Mon Apr 3 17:19:14 BST 2023
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] random: crng init done
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Reserved memory: created CMA memory pool at 0x0bc00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113680
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i smsc95xx.macaddr=B8:27:EB:6A:06:01 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ed65f346-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 177012K/458752K available (8985K kernel code, 1450K rwdata, 2772K rodata, 432K init, 589K bss, 19596K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 33370 entries in 98 pages
[ 0.000000] ftrace: allocated 98 pages with 3 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000081] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000179] bcm2835: system timer (irq = 27)
[ 0.001084] Console: colour dummy device 80x30
[ 0.001666] printk: console [tty1] enabled
[ 0.001756] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060329] pid_max: default: 32768 minimum: 301
[ 0.060564] LSM: Security Framework initializing
[ 0.060898] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.060982] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.062753] cgroup: Disabling memory control group subsystem
[ 0.063228] CPU: Testing write buffer coherency: ok
[ 0.065131] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.065218] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.065525] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 2.430895] SCSI subsystem initialized
[ 2.431447] usbcore: registered new interface driver usbfs
[ 2.431627] usbcore: registered new interface driver hub
[ 2.431772] usbcore: registered new device driver usb
[ 2.432194] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 2.432570] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 2.433153] pps_core: LinuxPPS API ver. 1 registered
[ 2.433213] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.433301] PTP clock support registered
[ 2.436539] clocksource: Switched to clocksource timer
[ 2.568291] VFS: Disk quotas dquot_6.6.0
[ 2.568502] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.568790] FS-Cache: Loaded
[ 2.569250] CacheFiles: Loaded
[ 2.590724] NET: Registered PF_INET protocol family
[ 2.591147] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 2.593849] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 2.593992] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
00000
[ 2.698573] brd: module loaded
[ 2.714901] loop: module loaded
[ 2.719705] Loading iSCSI transport class v2.0-870.
[ 2.725648] usbcore: registered new interface driver smsc95xx
[ 2.729216] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 3.460969] Core Release: 2.80a
[ 3.464427] Setting default values for core params
[ 3.467871] Finished setting default values for core params
[ 3.671493] Using Buffer DMA mode
[ 3.674846] Periodic Transfer Interrupt Enhancement - disabled
[ 3.678271] Multiprocessor Interrupt Enhancement - disabled
[ 3.681593] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 3.684894] Dedicated Tx FIFOs mode
[ 3.689236] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = cbd04000 dma = 0x8bd04000 len=9024
[ 3.699010] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[
[ 3.830827] Loading compiled-in X.509 certificates
[ 3.854384] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 3.857908] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 3.867755] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 3.871509] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.877169] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 3.880385] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
[ 3.910942] sdhost: log_buf @ a18c3e54 (8bd03000)
[ 3.963379] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 3.970638] of_cfs_init
[ 3.974611] of_cfs_init: OK
[ 3.982680] Waiting for root device PARTUUID=ed65f346-02...
[ 4.013508] mmc0: host does not support reading read-only switch, assuming write-enable
[ 4.020471] mmc0: new high speed SDXC card at address 5048
[ 4.025473] mmcblk0: mmc0:5048 SD128 119 GiB
[ 4.033751] mmcblk0: p1 p2
[ 4.038656] mmcblk0: mmc0:5048 SD128 119 GiB
[ 4.082624] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 4.085900] EXT4-fs (m
atch.
[ 8.646037] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.659481] systemd[1]: Reached target Local Encrypted Volumes.
[ 8.669131] systemd[1]: Reached target Network (Pre).
[ 8.677983] systemd[1]: Reached target Paths.
[ 8.686844] systemd[1]: Reached target Slices.
[ 8.695722] systemd[1]: Reached target Swap.
[ 8.712282] systemd[1]: Listening on Syslog Socket.
[ 8.723126] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.732581] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.743793] systemd[1]: Listening on Journal Audit Socket.
[ 8.754049] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.764524] systemd[1]: Listening on Journal Socket.
[ 8.787706] systemd[1]: Listening on udev Control Socket.
[ 8.797889] systemd[1]: Listening on udev Kernel Socket.
[ 8.808056] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 8.824900] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.860178] systemd[1]: Mounting RPC Pipe File System...
[ 8.915550] systemd[1]: Mounting Kernel Debug File System...
[ 8.987256] systemd[1]: Mounting Kernel Trace File System...
[ 8.995965] systemd[1]
[ 11.347585] systemd[1]: Mounting Kernel Configuration File System...
[ 11.561055] systemd[1]: Started File System Check Daemon to report status.
[ 11.698225] systemd[1]: Starting Apply Kernel Variables...
[ 11.860777] systemd[1]: Mounted FUSE Control File System.
[ 11.950274] systemd[1]: Mounted Kernel Configuration File System.
[ 12.366890] systemd[1]: Finished Apply Kernel Variables.
[ 12.470646] systemd[1]: Started Journal Service.
[ 13.616834] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 14.135298] systemd-journald[106]: Received client request to flush runtime journal.
[ 14.214695] systemd-journald[106]: File /var/log/journal/9eccb4042d304a1eb51f2da08e9e4f5d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 36.827620] Bluetooth: Core ver 2.22
[ 36.827790] NET: Registered PF_BLUETOOTH protocol family
[ 36.827807] Bluetooth: HCI device and connection manager initialized
[ 36.827839] Bluetooth: HCI socket layer initialized
[ 36.827858] Bluetooth: L2CAP socket layer initialized
[ 36.827897] Bluetooth: SCO socket layer initialized
[ 36.948931] Bluetooth: HCI UART driver ver 2.3
[ 36.948976] Bluetooth: HCI UART protocol H4 registered
[ 36.949115] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 36.949368] Bluetooth: HCI UART protocol Broadcom registered
[ 39.896388] tun: Universal TUN/TAP device driver, 1.6
[ 41.027100] Console: switching to colour dummy device 80x30
[ 41.096837] vc4-drm soc:gpu: bound 20400000.hvs (ops vc4_hvs_ops [vc4])
[ 41.316867] Registered IR keymap rc-cec
[ 41.317177] rc rc0: vc4-hdmi as /devices/platform/soc/20902000.hdmi/rc/rc0
[ 41.317479] input: vc4-hdmi as /devices/platform/soc/20902000.hdmi/rc/rc0/input0
[ 41.687837] vc4-drm soc:gpu: bound 20902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 41.688764] vc4-drm soc:gpu: bound 20004000.txp (ops vc4_txp_ops [vc4])
[ 41.689533] vc4-drm soc:gpu: bound 20206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 41.690281] vc4-drm soc:gpu: bound 20207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 41.691059] vc4-drm soc:gpu: bound 20807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 41.691703] vc4-drm soc:gpu: bound 20c00000.v3d (ops vc4_v3d_ops [vc4])
[ 41.756649] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 41.949102] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on min430-sdio for chip BCM43430/1
[ 42.025754] usbcore: registered new interface driver brcmfmac
[ 42.338206] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897
[ 46.399165] rtc-ds1307 1-0068: registered as rtc0
[ 46.401148] rtc-ds1307 1-0068: setting system clock to 2023-12-19T02:30:34 UTC (1702953034)
[ 48.212433] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.212474] Bluetooth: BNEP filters: protocol multicast
[ 48.212505] Bluetooth: BNEP socket layer initialized
[ 48.449283] Bluetooth: MGMT ver 1.22
[ 48.580764] NET: Registered PF_ALG protocol family
[ 50.490679] systemd-journald[106]: File /var/log/journal/9eccb4042d304a1eb51f2da08e9e4f5d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 51.626022] rtc-ds1307 1-0068: registered as rtc0
[ 51.630143] rtc-ds1307 1-0068: setting system clock to 2023-12-19T02:30:40 UTC (1702953040)
[ 51.876665] imx708 10-001a: camera module ID 0x0301
[ 51.880368] imx708 10-001a: Consider updating driver imx708 to match on endpoints
[ 53.322005] systemd-journald[106]: Failed to read journal file /var/log/journal/9eccb4042d304a1eb51f2da08e9e4f5d/user-1001.journal for rotation, trying to move it out of the way: Device or resource busy
[ 57.966394] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 61.704011] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 62.982932] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
pi@sediment-pi-zero-w-v1-j:~$
@ 11 0:-* 1m 4.10 1.0GHz 429M23% 118G3% 2023-12-19 15:31:24
