Add Teensy40

Author: vshymanskyy

examples_pio/Wasm_Advanced/README.md

@@ -11,6 +11,7 @@ To run the example:
 pio run -e <device> -t upload && pio device monitor
 ```
 Where `<device>` is one of:  
-`ESP32`, `ESP8266`, `Arduino101`, `MKR1000`, `NucleoWB55RG`, `BluePill`, `TinyBLE`, `Teensy31`, `WildFireV3`
+`ESP32`, `ESP8266`, `Arduino101`, `MKR1000`, `NucleoWB55RG`, `BluePill`, `TinyBLE`, `Teensy31`, `Teensy40`, `WildFireV3`
 
 **Note:** This example uses Wasm Linear Memory. You should be able to run it on any device that can afford to allocate 1-2 pages of Wasm Linear Memory (i.e. have >= 128KiB RAM).
+

examples_pio/Wasm_Advanced/platformio.ini

@@ -101,6 +101,16 @@ platform = teensy
 board = teensy31
 upload_protocol = teensy-cli
 
+src_build_flags =
+  ${env.src_build_flags}
+  -DLED_PIN=13
+  -O3 -flto
+
+[env:Teensy40]
+platform = teensy
+board = teensy40
+upload_protocol = teensy-cli
+
 src_build_flags =
   ${env.src_build_flags}
   -DLED_PIN=13

examples_pio/Wasm_Advanced/wasm_vm/wasm_vm.ino

@@ -20,13 +20,16 @@
 #define NATIVE_STACK_SIZE   (32*1024)
 
 // For (most) devices that cannot allocate a 64KiB wasm page
-//#define WASM_MEMORY_LIMIT   4096
+#define WASM_MEMORY_LIMIT   4096
 
 /*
  * WebAssembly app
  */
 
-#include "../wasm_apps/assemblyscript/app.wasm.h"
+#include "../wasm_apps/cpp/app.wasm.h"
+//#include "../wasm_apps/assemblyscript/app.wasm.h"
+//#include "../wasm_apps/rust/app.wasm.h"
+//#include "../wasm_apps/tinygo/app.wasm.h"
 
 /*
  * API bindings