tests: Bluetooth: Split CAP and GMAP AC tests into separate scripts

This commit splits the CAP and GMAP audio configuration (AC)
tests into separate scripts. The purpose of this is to reduce
the runtime of the individual scripts (some, like the cap_ac_11,
tests takes a long time to run all combinations).
This split also improves support for running them in parallel.

An additional, positive, side effect of this is that the logs will
also be smaller per run.

Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>

Author: Thalley

tests/bsim/bluetooth/audio/test_scripts/_gmap.sh

@@ -0,0 +1,116 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+source ${ZEPHYR_BASE}/tests/bsim/sh_common.source
+
+VERBOSITY_LEVEL=2
+EXECUTE_TIMEOUT=60
+BSIM_EXE=./bs_${BOARD_TS}_tests_bsim_bluetooth_audio_prj_conf
+
+cd ${BSIM_OUT_PATH}/bin
+
+function Execute_ac() {
+    local profile=""
+    local audio_config=""
+    local sink_preset=""
+    local source_preset=""
+    local acceptor_count=""
+    local initiator_test_id=""
+    local acceptor_test_id=""
+
+    OPTIND=1 # Reset OPTIND at the start of the function
+
+    while getopts "p:c:t:r:n:i:a:q:h" option; do
+        case "${option}" in
+            p)
+                profile=${OPTARG}
+                ;;
+            c)
+                audio_config=${OPTARG}
+                ;;
+            t)
+                sink_preset=${OPTARG} # TX preset
+                ;;
+            r)
+                source_preset=${OPTARG} # RX preset
+                ;;
+            n)
+                acceptor_count=${OPTARG}
+                ;;
+            i)
+                initiator_test_id=${OPTARG}
+                ;;
+            a)
+                acceptor_test_id=${OPTARG}
+                ;;
+            q)
+                sink_preset_arg_name=${OPTARG}
+                ;;
+            h)
+                echo "Usage: $0 [-p profile] [-c audio_configuration] [-t sink_preset] " \
+                               "[-r source_preset] [-n acceptor_count] [-i initiator_test_id] " \
+                               "[-a acceptor_test_id] [-q sink_preset_arg_name] [-h]"
+                return 0
+                ;;
+            *)
+                echo "Invalid option. Use -h for help."
+                return 1
+                ;;
+        esac
+    done
+
+    if [[ -n $sink_preset ]]; then
+        sink_preset_arg="${sink_preset_arg_name} ${sink_preset}"
+    else
+        sink_preset_arg=""
+    fi
+
+    if [[ -n $source_preset ]]; then
+        source_preset_arg="source_preset ${source_preset}"
+    else
+        source_preset_arg=""
+    fi
+
+    initiator_test_id=${initiator_test_id}_${audio_config}
+
+    let device_count=1+${acceptor_count}
+
+    sim_id="cap_unicast_ac_${audio_config}_${sink_preset}_${source_preset}"
+
+    printf "\n\n======== Running %s AC_%s with %s %s =========\n\n" \
+        "${profile}" "${audio_config}" "${sink_preset_arg}" "${source_preset_arg}"
+
+    Execute ${BSIM_EXE} -v=${VERBOSITY_LEVEL} -s=${sim_id} -d=0 -testid=${initiator_test_id} \
+        -RealEncryption=1 -rs=23 -D=${device_count} \
+        -argstest ${sink_preset_arg} ${source_preset_arg}
+
+    for i in $(seq 1 $acceptor_count); do
+        let rs=${i}*7 # ensure unique RS value per acceptor
+
+        Execute ${BSIM_EXE} -v=${VERBOSITY_LEVEL} -s=${sim_id} -d=${i} -testid=${acceptor_test_id} \
+            -RealEncryption=1 -rs=${rs} -D=${device_count}
+    done
+
+    Execute ./bs_2G4_phy_v1 -v=${VERBOSITY_LEVEL} -s=${sim_id} -D=${device_count} -sim_length=60e6
+
+    wait_for_background_jobs
+}
+
+function Execute_cap_unicast_ac() {
+    Execute_ac -p "CAP" -i cap_initiator_ac -a cap_acceptor_unicast -q sink_preset "$@"
+}
+
+function Execute_cap_broadcast_ac() {
+    Execute_ac -p "CAP" -i cap_initiator_ac -a cap_acceptor_broadcast -q preset "$@"
+}
+
+function Execute_gmap_unicast_ac() {
+    Execute_ac -p "GMAP" -i gmap_ugg_ac -a gmap_ugt -q sink_preset "$@"
+}
+
+function Execute_gmap_broadcast_ac() {
+    Execute_ac -p "GMAP" -i gmap_ugg_ac -a gmap_ugt -q broadcast_preset "$@"
+}

tests/bsim/bluetooth/audio/test_scripts/audio_config_tests/_ac_common.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+dir_path=$(dirname "$0")
+
+set -e # Exit on error
+
+# Run all cap_ac_1* tests
+for file in "$dir_path"/_cap_ac_*.sh; do
+    if [ -f "$file" ]; then
+        echo "Running $file"
+        $file
+    fi
+done

tests/bsim/bluetooth/audio/test_scripts/audio_config_tests/_cap_ac.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+dir_path=$(dirname "$0")
+
+set -e # Exit on error
+
+# Run all cap_ac_1* tests
+for file in "$dir_path"/cap_ac_1*.sh; do
+    if [ -f "$file" ]; then
+        echo "Running $file"
+        $file
+    fi
+done

tests/bsim/bluetooth/audio/test_scripts/audio_config_tests/_cap_ac_1.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+dir_path=$(dirname "$0")
+
+set -e # Exit on error
+
+# Run all cap_ac_10* tests
+for file in "$dir_path"/cap_ac_10*.sh; do
+    if [ -f "$file" ]; then
+        echo "Running $file"
+        $file
+    fi
+done

tests/bsim/bluetooth/audio/test_scripts/audio_config_tests/_cap_ac_10.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+dir_path=$(dirname "$0")
+
+set -e # Exit on error
+
+# Run all cap_ac_11* tests
+for file in "$dir_path"/cap_ac_11*.sh; do
+    if [ -f "$file" ]; then
+        echo "Running $file"
+        $file
+    fi
+done

tests/bsim/bluetooth/audio/test_scripts/audio_config_tests/_cap_ac_11.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+dir_path=$(dirname "$0")
+
+set -e # Exit on error
+
+# Run all cap_ac_11_i* tests
+for file in "$dir_path"/cap_ac_11_i*.sh; do
+    if [ -f "$file" ]; then
+        echo "Running $file"
+        $file
+    fi
+done

tests/bsim/bluetooth/audio/test_scripts/audio_config_tests/_cap_ac_11_i.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+dir_path=$(dirname "$0")
+
+set -e # Exit on error
+
+# Run all cap_ac_11_ii* tests
+for file in "$dir_path"/cap_ac_11_ii*.sh; do
+    if [ -f "$file" ]; then
+        echo "Running $file"
+        $file
+    fi
+done

tests/bsim/bluetooth/audio/test_scripts/audio_config_tests/_cap_ac_11_ii.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+dir_path=$(dirname "$0")
+
+set -e # Exit on error
+
+# Run all cap_ac_12* tests
+for file in "$dir_path"/cap_ac_12*.sh; do
+    if [ -f "$file" ]; then
+        echo "Running $file"
+        $file
+    fi
+done

tests/bsim/bluetooth/audio/test_scripts/audio_config_tests/_cap_ac_12.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+
+dir_path=$(dirname "$0")
+
+set -e # Exit on error
+
+# Run all cap_ac_13* tests
+for file in "$dir_path"/cap_ac_13*.sh; do
+    if [ -f "$file" ]; then
+        echo "Running $file"
+        $file
+    fi
+done