LowFracRate is set of MATLAB-based codes designed for the processing the raw data from four hydraulic fracturing experiments: M03, M04, M05, and M08. Each experiment has its own conditions.
To use the code, simply place the main MATLAB code and its corresponding subcode in the same directory as the data.
For each experiment, run the respective file:
Low_Rate_Data_Process_Code_11_02_M03.m
Low_Rate_Data_Process_Code_12_12_M04.m
Low_Rate_Data_Process_Code_12_06_M05.m
Low_Rate_Data_Process_Code_01_18_M08.m
Beside their own subcodes folder of
M03_subcodes
M04_subcodes
M05_subcodes
M08_subcodes
In M03 and M05, we injected glucose using an interface vessel and ISCO pump, while in M04 and M08, glycerol was injected directly from the Top Industrial pump.
Everything is pre-tuned, so no additional adjustments are needed. Just ensure you add the respective subcode directory (e.g., M03_subcodes) to MATLAB before running the main file for each experiment.
Copyright © ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE, Switzerland, Geo-Energy Laboratory, 2020-2024. All rights reserved.
- Mohsen Talebkeikhah
- Brice Lecampion
https://doi.org/10.5281/zenodo.13624264
https://doi.org/10.5281/zenodo.13624266
https://doi.org/10.5281/zenodo.13402755
https://doi.org/10.5281/zenodo.13624281
Email: m.talebkeikhah@gmail.com