Made Comparable with Arduino ide

examples/MQ135Test/MQ1135Test.ino

@@ -0,0 +1,58 @@
+/*-data-type------size---------description----------------------
+  boolean        (8 bit)   -  [true/false]
+  byte           (8 bit)   -  [0-255] unsigned number
+  char           (8 bit)   -  [-128 to 127] signed number
+  unsigned char  (8 bit)   -  [-128 to 127] signed number
+  word           (16 bit)  -  [0-65535] unsigned number
+  unsigned int   (16 bit)  -  [0-65535] unsigned number
+  int            (16 bit)  -  [-32768 to 32767] signed number
+  unsigned long  (32 bit)  -  [0-4,294,967,295] unsigned number usually for millis
+  long           (32 bit)  -  [-2,147,483,648 to 2,147,483,647] signed number
+  float          (32 bit)  -  [-3.4028235E38 to 3.4028235E38] signed number
+  uint8_t        (8 bit)   -  [0-255] unsigned number
+  int8_t         (8 bit)   -  [-127 - 127] signed number
+  uint16_t       (16 bit)  -  [0-65,535] unsigned number
+  int16_t        (16 bit)  -  [-32,768 - 32,767] signed number
+  uint32_t       (32 bit)  -  [0-4,294,967,295] unsigned number
+  int32_t        (32 bit)  -  [-2,147,483,648 - 2,147,483,647] signed number
+  uint64_t       (64 bit)  -  [0-18,446,744,073,709,551,615] unsigned number
+  int64_t        (64 bit)  -  [−9,223,372,036,854,775,808 - 9,223,372,036,854,775,807] signed number
+  --------------------------------------------------------------
+  camelCase                -  anything that changes
+  snake_case               -  variable's that are exclusive in a function
+  Snake_Case               -  CLASS/struct exclusave varables/functions
+  iNVERTEDcAMELcASE        -  outside code that is being accessed [database]
+  SNake_CAse               -  duplicate varables inside the case function [frequently used in library names]
+  ALL_CAPS                 -  const varable names or defines
+  ------------- by jediRick & RefreshMyMind --------------------
+*/
+
+#include <Arduino.h>
+#include <MQ135.h>  // added the library
+
+#define mq135read A0 //  Initialization of the pin A0
+
+MQ135 mq135(mq135read); // calling calss type 
+
+float temperature = 24; // write your room Temperature
+float humidity = 50; // pre define values Humidity
+
+void setup()
+{
+  Serial.begin(9600); // Setting baud rate 
+}
+
+void loop()
+{
+  float rzero = mq135.getRZero();
+  float correctedRZero = mq135.getCorrectedRZero(temperature, humidity);
+  float resistance = mq135.getResistance();
+  float ppm = mq135.getPPM();
+  float correctedPPM = mq135.getCorrectedPPM(temperature, humidity);
+
+  Serial.print("PPM: ");
+  Serial.print(correctedPPM); // printing the current PPM values it will take few min to settle.
+  Serial.println("ppm");
+
+  delay(100);
+}

examples/MQ135Test/MQ135Test.ino

@@ -0,0 +1,58 @@
+/*-data-type------size---------description----------------------
+  boolean        (8 bit)   -  [true/false]
+  byte           (8 bit)   -  [0-255] unsigned number
+  char           (8 bit)   -  [-128 to 127] signed number
+  unsigned char  (8 bit)   -  [-128 to 127] signed number
+  word           (16 bit)  -  [0-65535] unsigned number
+  unsigned int   (16 bit)  -  [0-65535] unsigned number
+  int            (16 bit)  -  [-32768 to 32767] signed number
+  unsigned long  (32 bit)  -  [0-4,294,967,295] unsigned number usually for millis
+  long           (32 bit)  -  [-2,147,483,648 to 2,147,483,647] signed number
+  float          (32 bit)  -  [-3.4028235E38 to 3.4028235E38] signed number
+  uint8_t        (8 bit)   -  [0-255] unsigned number
+  int8_t         (8 bit)   -  [-127 - 127] signed number
+  uint16_t       (16 bit)  -  [0-65,535] unsigned number
+  int16_t        (16 bit)  -  [-32,768 - 32,767] signed number
+  uint32_t       (32 bit)  -  [0-4,294,967,295] unsigned number
+  int32_t        (32 bit)  -  [-2,147,483,648 - 2,147,483,647] signed number
+  uint64_t       (64 bit)  -  [0-18,446,744,073,709,551,615] unsigned number
+  int64_t        (64 bit)  -  [−9,223,372,036,854,775,808 - 9,223,372,036,854,775,807] signed number
+  --------------------------------------------------------------
+  camelCase                -  anything that changes
+  snake_case               -  variable's that are exclusive in a function
+  Snake_Case               -  CLASS/struct exclusave varables/functions
+  iNVERTEDcAMELcASE        -  outside code that is being accessed [database]
+  SNake_CAse               -  duplicate varables inside the case function [frequently used in library names]
+  ALL_CAPS                 -  const varable names or defines
+  ------------- by jediRick & RefreshMyMind --------------------
+*/
+
+#include <Arduino.h>
+#include <MQ135.h>  // added the library
+
+#define mq135read A0 //  Initialization of the pin A0
+
+MQ135 mq135(mq135read); // calling calss type 
+
+float temperature = 24; // write your room Temperature
+float humidity = 50; // pre define values Humidity
+
+void setup()
+{
+  Serial.begin(9600); // Setting baud rate 
+}
+
+void loop()
+{
+  float rzero = mq135.getRZero();
+  float correctedRZero = mq135.getCorrectedRZero(temperature, humidity);
+  float resistance = mq135.getResistance();
+  float ppm = mq135.getPPM();
+  float correctedPPM = mq135.getCorrectedPPM(temperature, humidity);
+
+  Serial.print("PPM: ");
+  Serial.print(correctedPPM); // printing the current PPM values it will take few min to settle.
+  Serial.println("ppm");
+
+  delay(100);
+}

examples/MQ135_DHTxx/MQ135_DHTxx.ino

@@ -0,0 +1,71 @@
+/*-data-type------size---------description----------------------
+  boolean        (8 bit)   -  [true/false]
+  byte           (8 bit)   -  [0-255] unsigned number
+  char           (8 bit)   -  [-128 to 127] signed number
+  unsigned char  (8 bit)   -  [-128 to 127] signed number
+  word           (16 bit)  -  [0-65535] unsigned number
+  unsigned int   (16 bit)  -  [0-65535] unsigned number
+  int            (16 bit)  -  [-32768 to 32767] signed number
+  unsigned long  (32 bit)  -  [0-4,294,967,295] unsigned number usually for millis
+  long           (32 bit)  -  [-2,147,483,648 to 2,147,483,647] signed number
+  float          (32 bit)  -  [-3.4028235E38 to 3.4028235E38] signed number
+  uint8_t        (8 bit)   -  [0-255] unsigned number
+  int8_t         (8 bit)   -  [-127 - 127] signed number
+  uint16_t       (16 bit)  -  [0-65,535] unsigned number
+  int16_t        (16 bit)  -  [-32,768 - 32,767] signed number
+  uint32_t       (32 bit)  -  [0-4,294,967,295] unsigned number
+  int32_t        (32 bit)  -  [-2,147,483,648 - 2,147,483,647] signed number
+  uint64_t       (64 bit)  -  [0-18,446,744,073,709,551,615] unsigned number
+  int64_t        (64 bit)  -  [−9,223,372,036,854,775,808 - 9,223,372,036,854,775,807] signed number
+  --------------------------------------------------------------
+  camelCase                -  anything that changes
+  snake_case               -  variable's that are exclusive in a function
+  Snake_Case               -  CLASS/struct exclusave varables/functions
+  iNVERTEDcAMELcASE        -  outside code that is being accessed [database]
+  SNake_CAse               -  duplicate varables inside the case function [frequently used in library names]
+  ALL_CAPS                 -  const varable names or defines
+  ------------- by jediRick & RefreshMyMind --------------------
+*/
+
+#include <Arduino.h>
+#include <MQ135.h>
+#include "DHT.h"  // Lib used https://github.com/adafruit/DHT-sensor-library.git 
+ #include <Adafruit_Sensor.h>
+#define mq135read A0 //  Initialization of the pin A0
+#define dhtpin 2
+
+// Uncomment whatever module you're using!
+#define DHTTYPE DHT11 // DHT 11
+// #define DHTTYPE DHT22   // DHT 22  (AM2302), AM2321
+// #define DHTTYPE DHT21   // DHT 21 (AM2301)
+
+DHT dht(dhtpin, DHTTYPE); // Initialize DHT sensor.
+MQ135 mq135(mq135read);   // Initialize MQ135 sensor.
+
+void setup()
+{
+    Serial.begin(9600); // Setting baud rate
+}
+
+void loop()
+{
+
+    float humidity = dht.readHumidity();
+    float temperature = dht.readTemperature();
+    float rzero = mq135.getRZero();
+    float correctedRZero = mq135.getCorrectedRZero(temperature, humidity); // Passing the t and h values.
+    float resistance = mq135.getResistance();
+    float ppm = mq135.getPPM();
+    float correctedPPM = mq135.getCorrectedPPM(temperature, humidity); // Passing the t and h values.
+
+    Serial.print("Temperature: ");
+    Serial.println(temperature); // printing temperature data from dhtxx.
+    Serial.print("Humidity: ");
+    Serial.println(humidity); // printing humidity data from dhtxx.
+
+    Serial.print("PPM: ");
+    Serial.print(correctedPPM); // printing the current PPM values it will take few min to settle.
+    Serial.println("ppm");
+
+    delay(1000); // Delay of 1Sec.
+}

keywords.txt

@@ -0,0 +1,22 @@
+####################################
+# Syntax Coloring Map For MQ135 Sensor
+####################################
+
+####################
+# Datatypes (KEYWORD1)
+####################
+
+MQ135 KEYWORD1
+
+
+######################
+# Functions (KEYWORD2)
+######################
+
+getCorrectionFactor KEYWORD2
+getResistance KEYWORD2
+getCorrectedResistance KEYWORD2
+getPPM KEYWORD2
+getCorrectedPPM KEYWORD2
+getRZero KEYWORD2
+getCorrectedRZero KEYWORD2

library.properties

@@ -0,0 +1,9 @@
+name=MQ135 Sensor
+version=1.0
+author=
+maintainer=
+sentence=Arduino library for MQ135 Sensor
+paragraph=Arduino library for MQ135 Sensor
+category=Sensors
+url=https://github.com/RefreshMyMind-I/MQ135.git
+architectures=*