Add Polar Cloud remote access integration

scripts/menu/10SE/install_menu_10SE.sh

@@ -33,6 +33,7 @@ function install_menu_ui_10se() {
   menu_option '15' 'Install' 'Mobileraker Companion'
   menu_option '16' 'Install' 'OctoApp Companion'
   menu_option '17' 'Install' 'SimplyPrint'
+  menu_option '18' 'Install' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -198,6 +199,18 @@ function install_menu_10se() {
         else
           run "install_simplyprint" "install_menu_ui_10se"
         fi;;
+      18)
+        if [ -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_polarcloud" "install_menu_ui_10se"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/10SE/remove_menu_10SE.sh

@@ -33,6 +33,7 @@ function remove_menu_ui_10se() {
   menu_option '15' 'Remove' 'Mobileraker Companion'
   menu_option '16' 'Remove' 'OctoApp Companion'
   menu_option '17' 'Remove' 'SimplyPrint'
+  menu_option '18' 'Remove' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -178,6 +179,12 @@ function remove_menu_10se() {
         else
           run "remove_simplyprint" "remove_menu_ui_10se"
         fi;;
+      18)
+        if [ ! -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is not installed!"
+        else
+          run "remove_polarcloud" "remove_menu_ui_10se"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/3KE/install_menu_3KE.sh

@@ -35,6 +35,7 @@ function install_menu_ui_3ke() {
   menu_option '17' 'Install' 'Mobileraker Companion'
   menu_option '18' 'Install' 'OctoApp Companion'
   menu_option '19' 'Install' 'SimplyPrint'
+  menu_option '20' 'Install' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -212,6 +213,18 @@ function install_menu_3ke() {
         else
           run "install_simplyprint" "install_menu_ui_3ke"
         fi;;
+      20)
+        if [ -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_polarcloud" "install_menu_ui_3ke"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/3KE/remove_menu_3KE.sh

@@ -35,6 +35,7 @@ function remove_menu_ui_3ke() {
   menu_option '17' 'Remove' 'Mobileraker Companion'
   menu_option '18' 'Remove' 'OctoApp Companion'
   menu_option '19' 'Remove' 'SimplyPrint'
+  menu_option '20' 'Remove' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -192,6 +193,12 @@ function remove_menu_3ke() {
         else
           run "remove_simplyprint" "remove_menu_ui_3ke"
         fi;;
+      20)
+        if [ ! -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is not installed!"
+        else
+          run "remove_polarcloud" "remove_menu_ui_3ke"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/3V3/install_menu_3V3.sh

@@ -37,6 +37,7 @@ function install_menu_ui_3v3() {
   menu_option '19' 'Install' 'Mobileraker Companion'
   menu_option '20' 'Install' 'OctoApp Companion'
   menu_option '21' 'Install' 'SimplyPrint'
+  menu_option '22' 'Install' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -230,6 +231,18 @@ function install_menu_3v3() {
         else
           run "install_simplyprint" "install_menu_ui_3v3"
         fi;;
+      22)
+        if [ -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Updated Moonraker is needed, please install it first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Updated Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_polarcloud" "install_menu_ui_3v3"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/3V3/remove_menu_3V3.sh

@@ -37,6 +37,7 @@ function remove_menu_ui_3v3() {
   menu_option '19' 'Remove' 'Mobileraker Companion'
   menu_option '20' 'Remove' 'OctoApp Companion'
   menu_option '21' 'Remove' 'SimplyPrint'
+  menu_option '22' 'Remove' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -204,6 +205,12 @@ function remove_menu_3v3() {
         else
           run "remove_simplyprint" "remove_menu_ui_3v3"
         fi;;
+      22)
+        if [ ! -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is not installed!"
+        else
+          run "remove_polarcloud" "remove_menu_ui_3v3"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/E5M/install_menu_E5M.sh

@@ -40,6 +40,7 @@ function install_menu_ui_e5m() {
   menu_option '22' 'Install' 'Mobileraker Companion'
   menu_option '23' 'Install' 'OctoApp Companion'
   menu_option '24' 'Install' 'SimplyPrint'
+  menu_option '25' 'Install' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -249,6 +250,18 @@ function install_menu_e5m() {
         else
           run "install_simplyprint" "install_menu_ui_e5m"
         fi;;
+      25)
+        if [ -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_polarcloud" "install_menu_ui_e5m"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/E5M/remove_menu_E5M.sh

@@ -40,6 +40,7 @@ function remove_menu_ui_e5m() {
   menu_option '22' 'Remove' 'Mobileraker Companion'
   menu_option '23' 'Remove' 'OctoApp Companion'
   menu_option '24' 'Remove' 'SimplyPrint'
+  menu_option '25' 'Remove' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -233,6 +234,12 @@ function remove_menu_e5m() {
         else
           run "remove_simplyprint" "remove_menu_ui_e5m"
         fi;;
+      25)
+        if [ ! -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is not installed!"
+        else
+          run "remove_polarcloud" "remove_menu_ui_e5m"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/K1/install_menu_K1.sh

@@ -40,6 +40,7 @@ function install_menu_ui_k1() {
   menu_option '22' 'Install' 'Mobileraker Companion'
   menu_option '23' 'Install' 'OctoApp Companion'
   menu_option '24' 'Install' 'SimplyPrint'
+  menu_option '25' 'Install' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -249,6 +250,18 @@ function install_menu_k1() {
         else
           run "install_simplyprint" "install_menu_ui_k1"
         fi;;
+      25)
+        if [ -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_polarcloud" "install_menu_ui_k1"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/menu/K1/remove_menu_K1.sh

@@ -40,6 +40,7 @@ function remove_menu_ui_k1() {
   menu_option '22' 'Remove' 'Mobileraker Companion'
   menu_option '23' 'Remove' 'OctoApp Companion'
   menu_option '24' 'Remove' 'SimplyPrint'
+  menu_option '25' 'Remove' 'Polar Cloud'
   hr
   inner_line
   hr
@@ -233,6 +234,12 @@ function remove_menu_k1() {
         else
           run "remove_simplyprint" "remove_menu_ui_k1"
         fi;;
+      25)
+        if [ ! -d "$POLARCLOUD_FOLDER" ]; then
+          error_msg "Polar Cloud is not installed!"
+        else
+          run "remove_polarcloud" "remove_menu_ui_k1"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)

scripts/paths.sh

@@ -164,6 +164,10 @@ function set_paths() {
   OCTOAPP_COMPANION_FOLDER="${USR_DATA}/octoapp"
   OCTOAPP_COMPANION_URL="https://github.com/crysxd/OctoApp-Plugin.git"
 
+  # Polar Cloud #
+  POLARCLOUD_FOLDER="${USR_DATA}/polar-cloud-klipper"
+  POLARCLOUD_URL="https://github.com/Polar3D/polar-cloud-klipper.git"
+
   # Custom Boot Display #
   BOOT_DISPLAY_FOLDER="/etc/boot-display"
   BOOT_DISPLAY_FILE="${BOOT_DISPLAY_FOLDER}/part0/pic_100.jpg"

scripts/polarcloud.sh

@@ -0,0 +1,68 @@
+#!/bin/sh
+
+set -e
+
+function polarcloud_message(){
+  top_line
+  title 'Polar Cloud' "${yellow}"
+  inner_line
+  hr
+  echo -e " │ ${cyan}Polar Cloud provides remote access and monitoring for your   ${white}│"
+  echo -e " │ ${cyan}3D printer. Connect to your printer from anywhere, manage    ${white}│"
+  echo -e " │ ${cyan}print jobs, and access cloud-based slicing features.         ${white}│"
+  hr
+  bottom_line
+}
+
+function install_polarcloud(){
+  polarcloud_message
+  local yn
+  while true; do
+    install_msg "Polar Cloud" yn
+    case "${yn}" in
+      Y|y)
+        echo -e "${white}"
+        if [ -d "$POLARCLOUD_FOLDER" ]; then
+          echo -e "Info: Polar Cloud is already installed. Download skipped."
+        else
+          echo -e "Info: Downloading Polar Cloud..."
+          git config --global http.sslVerify false
+          git clone "$POLARCLOUD_URL" "$POLARCLOUD_FOLDER"
+        fi
+        echo -e "Info: Running Polar Cloud installer..."
+        cd "$POLARCLOUD_FOLDER"
+        sh ./install.sh
+        echo
+        ok_msg "Polar Cloud has been installed successfully!"
+        return;;
+      N|n)
+        error_msg "Installation canceled!"
+        return;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+}
+
+function remove_polarcloud(){
+  polarcloud_message
+  local yn
+  while true; do
+    remove_msg "Polar Cloud" yn
+    case "${yn}" in
+      Y|y)
+        echo -e "${white}"
+        echo -e "Info: Running Polar Cloud uninstaller..."
+        cd "$POLARCLOUD_FOLDER"
+        sh ./uninstall.sh
+        echo
+        ok_msg "Polar Cloud has been removed successfully!"
+        return;;
+      N|n)
+        error_msg "Deletion canceled!"
+        return;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+}