[Snyk] Security upgrade urllib3 from 2.0.7 to 2.6.0

[KB01111]

User description

Snyk has created this PR to fix 2 vulnerabilities in the pip dependencies of this project.

Snyk changed the following file(s):

• requirements.txt

⚠️ Warning

supafunc 0.2.2 has requirement httpx<0.24.0,>=0.23.0, but you have httpx 0.24.1.
supabase 0.7.1 has requirement httpx<0.24.0,>=0.23.0, but you have httpx 0.24.1.
storage3 0.3.6 has requirement httpx<0.24,>=0.23, but you have httpx 0.24.1.
realtime 0.0.5 has requirement websockets<11.0,>=10.3, but you have websockets 11.0.3.
postgrest-py 0.10.4 has requirement httpx<0.24.0,>=0.23.0, but you have httpx 0.24.1.
postgrest-py 0.10.4 has requirement pydantic<2.0.0,>=1.9.0, but you have pydantic 2.5.3.
openai 1.53.1 requires jiter, which is not installed.
openai 1.53.1 has requirement typing-extensions<5,>=4.11, but you have typing-extensions 4.7.1.
gotrue 0.5.4 has requirement pydantic<2.0.0,>=1.9.1, but you have pydantic 2.5.3.
gotrue 0.5.4 has requirement httpx<0.24.0,>=0.23.0, but you have httpx 0.24.1.
anthropic 0.38.0 requires tokenizers, which is not installed.
anthropic 0.38.0 requires jiter, which is not installed.

---

Important

• Check the changes in this PR to ensure they won't cause issues with your project.
• Max score is 1000. Note that the real score may have changed since the PR was raised.
• This PR was automatically created by Snyk using the credentials of a real user.
• Some vulnerabilities couldn't be fully fixed and so Snyk will still find them when the project is tested again. This may be because the vulnerability existed within more than one direct dependency, but not all of the affected dependencies could be upgraded.

---

Note: You are seeing this because you or someone else with access to this repository has authorized Snyk to open fix PRs.

For more information:
🧐 View latest project report
📜 Customise PR templates
🛠 Adjust project settings
📚 Read about Snyk's upgrade logic

---

Learn how to fix vulnerabilities with free interactive lessons:

🦉 Allocation of Resources Without Limits or Throttling

---

CodeAnt-AI Description

Pin urllib3 to a non-vulnerable version to address security issues

What Changed

• Added urllib3>=2.6.0 to requirements to remove two known urllib3 vulnerabilities
• No functional behavior changes expected; this only updates a transitive dependency to a safer version

Impact

✅ Fewer vulnerable dependencies
✅ Safer HTTP requests
✅ Fewer security alerts during dependency scans

💡 Usage Guide

Checking Your Pull Request

Every time you make a pull request, our system automatically looks through it. We check for security issues, mistakes in how you're setting up your infrastructure, and common code problems. We do this to make sure your changes are solid and won't cause any trouble later.

Talking to CodeAnt AI

Got a question or need a hand with something in your pull request? You can easily get in touch with CodeAnt AI right here. Just type the following in a comment on your pull request, and replace "Your question here" with whatever you want to ask:

@codeant-ai ask: Your question here

This lets you have a chat with CodeAnt AI about your pull request, making it easier to understand and improve your code.

Example

@codeant-ai ask: Can you suggest a safer alternative to storing this secret?

Preserve Org Learnings with CodeAnt

You can record team preferences so CodeAnt AI applies them in future reviews. Reply directly to the specific CodeAnt AI suggestion (in the same thread) and replace "Your feedback here" with your input:

@codeant-ai: Your feedback here

This helps CodeAnt AI learn and adapt to your team's coding style and standards.

Example

@codeant-ai: Do not flag unused imports.

Retrigger review

Ask CodeAnt AI to review the PR again, by typing:

@codeant-ai: review

Check Your Repository Health

To analyze the health of your code repository, visit our dashboard at https://app.codeant.ai. This tool helps you identify potential issues and areas for improvement in your codebase, ensuring your repository maintains high standards of code health.

[codemetrics-ai]

⚠️ Your Codemetrics free trial has expired. To continue using AI based pull request reviews, please subscribe to premium in team settings.

[Copilot]

Copilot wasn't able to review any files in this pull request.

---

💡 Add Copilot custom instructions for smarter, more guided reviews. Learn how to get started.

[codeant-ai]

CodeAnt AI is reviewing your PR.

---

Thanks for using CodeAnt! 🎉

We're free for open-source projects. if you're enjoying it, help us grow by sharing.

Share on X ·
Reddit ·
LinkedIn

[coderabbitai]

Important

Review skipped

Ignore keyword(s) in the title.

Please check the settings in the CodeRabbit UI or the .coderabbit.yaml file in this repository. To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

✨ Finishing touches

🧪 Generate unit tests (beta)

• Create PR with unit tests
• Post copyable unit tests in a comment
• Commit unit tests in branch snyk-fix-933d59e5f5a7e66c4794a05d7ff5784c

---

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

_{Comment @coderabbitai help to get the list of available commands and usage tips.}

[gemini-code-assist]

Summary of Changes

Hello @KB01111, I'm Gemini Code Assist¹! I'm currently reviewing this pull request and will post my feedback shortly. In the meantime, here's a summary to help you and other reviewers quickly get up to speed!

This pull request focuses on improving the project's security by upgrading the urllib3 dependency to version 2.6.0. This upgrade is crucial for mitigating two identified vulnerabilities within the urllib3 library, ensuring the application benefits from the latest security patches. The change was automatically initiated by Snyk as part of its automated vulnerability remediation process.

Highlights

• Security Upgrade: Upgraded the urllib3 dependency from version 2.0.7 to 2.6.0 to address two identified security vulnerabilities.
• Automated Fix: This pull request was automatically generated by Snyk to apply the necessary security fix.

Using Gemini Code Assist

The full guide for Gemini Code Assist can be found on our documentation page, here are some quick tips.

Invoking Gemini

You can request assistance from Gemini at any point by creating a comment using either /gemini <command> or @gemini-code-assist <command>. Below is a summary of the supported commands on the current page.

Feature	Command	Description
Code Review	/gemini review	Performs a code review for the current pull request in its current state.
Pull Request Summary	/gemini summary	Provides a summary of the current pull request in its current state.
Comment	@gemini-code-assist	Responds in comments when explicitly tagged, both in pull request comments and review comments.
Help	/gemini help	Displays a list of available commands.

Customization

To customize Gemini Code Assist for GitHub experience, repository maintainers can create a configuration file and/or provide a custom code review style guide (such as PEP-8 for Python) by creating and adding files to a .gemini/ folder in the base of the repository. Detailed instructions can be found here.

Limitations & Feedback

Gemini Code Assist may make mistakes. Please leave feedback on any instances where its feedback is incorrect or counter productive. You can react with 👍 and 👎 on @gemini-code-assist comments. If you're interested in giving your feedback about your experience with Gemini Code Assist for Github and other Google products, sign up here.

You can also get AI-powered code generation, chat, as well as code reviews directly in the IDE at no cost with the Gemini Code Assist IDE Extension.

Footnotes

1. Review the Privacy Notices, Generative AI Prohibited Use Policy, Terms of Service, and learn how to configure Gemini Code Assist in GitHub here. Gemini can make mistakes, so double check it and use code with caution. ↩

[openhands-ai]

Looks like there are a few issues preventing this PR from being merged!

• GitHub Actions are failing:
  • Atlas AgentVerse CI

If you'd like me to help, just leave a comment, like

@OpenHands please fix the failing actions on PR #9 at branch `snyk-fix-933d59e5f5a7e66c4794a05d7ff5784c`

Feel free to include any additional details that might help me get this PR into a better state.

_{^{You can manage your notification settings}}

[codeant-ai]

CodeAnt AI finished reviewing your PR.

[codeant-ai]

💡 Enhance Your PR Reviews

We noticed that 3 feature(s) are not configured for this repository. Enabling these features can help improve your code quality and workflow:

🚦 Quality Gates

Status: Quality Gates are not enabled at the organization level
Learn more about Quality Gates

🎫 Jira Ticket Compliance

Status: Jira credentials file not found. Please configure Jira integration in your settings
Learn more about Jira Integration

⚙️ Custom Rules

Status: No custom rules configured. Add rules via organization settings or .codeant/review.json in your repository
Learn more about Custom Rules

---

Want to enable these features? Contact your organization admin or check our documentation for setup instructions.

[gemini-code-assist]

Code Review

This pull request from Snyk addresses a security vulnerability by pinning urllib3 to version 2.6.0 or newer. While this change mitigates the vulnerability, it should be considered a temporary workaround. Pinning a transitive dependency directly in requirements.txt can lead to future dependency resolution conflicts.

More importantly, the Snyk analysis has surfaced several critical dependency conflicts within your project, as detailed in the PR description's 'Warning' section. For example:

• Several packages related to supabase (like postgrest-py and gotrue) require pydantic<2.0.0, but your project specifies pydantic>=2.0,<3.0.
• There are also version conflicts with httpx and websockets.
• Some packages like openai are missing required dependencies (jiter).

These conflicts are severe and will likely cause runtime errors, making the application unstable. It is strongly recommended to address these underlying dependency issues. A good approach would be to update the direct dependencies (e.g., supabase) to versions that are compatible with your other requirements like pydantic v2. Resolving these conflicts will create a more stable and secure environment, and may even make the direct pin of urllib3 unnecessary.

[gemini-code-assist]

It is a standard convention to end text files with a single newline character. This prevents issues with some command-line tools and file processing utilities. Please add a newline at the end of this file.

urllib3>=2.6.0 # not directly required, pinned by Snyk to avoid a vulnerability