Skip to content

ProForge 300

Jump to bottom
Makertech 3D edited this page Aug 25, 2025 · 1 revision

ProForge 300

Build Guides for the ProForge 300 Tool Changer 3D Printer.

Description

The ProForge 300 is a high-performance Tool Changing Quad Core-XY 3D Printer with a 300 × 300 × 300 mm build volume, heated bed, and a direct drive extruder and hotend capable of printing up to 300 °C. It is powered by the open-source Klipper firmware.

The ProForge 300 can be upgraded to:

What's Included

See the Unboxing Guide.

Community & Troubleshooting

If you are missing a part or have received a faulty/broken one, please fill out this replacement form.

For direct support, email us at info@makertech3d.com.

Safety Notice

  • Operate the ProForge 300 in a well-ventilated, open, and dry environment.
  • Be aware of moving parts (pinching hazard).
  • The hotend can reach 300 °C. This can cause severe burns. Allow it to cool before touching.
  • Keep children and pets away while operating.
  • Do not disconnect wiring while powered on.
  • Avoid loose clothing and long hair near moving parts.
  • Immediately shut down the machine if an error occurs to prevent damage.

Disclaimer

This product is a DIY kit to be assembled by the user at their own risk.

Makertech 3D Ltd disclaims all responsibility, risk, or liability for any damage or injury to persons or property arising from its use.

Neither Makertech 3D nor its suppliers shall be liable for any indirect, incidental, consequential, special, punitive, or exemplary damages (including, without limitation, inability to use or access the products, loss of data, loss of business, loss of profits, or business interruption), even if advised of the possibility of such damages.

Makertech 3D is not responsible for any products (3D printed parts or otherwise) produced with the ProForge 300 or any of its other machines. In no event shall Makertech 3D’s liability exceed the amount actually paid for the product.

By purchasing and using this product, the customer:

  • Acknowledges and accepts the terms of use provided in the assembly manuals.
  • Has read the safety instructions and agrees to follow them.

Clone this wiki locally