MicrosoftDocs · robinharwood · Oct 30, 2025 · Sep 22, 2023 · Sep 25, 2023 · Sep 25, 2023
diff --git a/WindowsServerDocs/administration/windows-commands/active.md b/WindowsServerDocs/administration/windows-commands/active.md
@@ -3,8 +3,8 @@ title: active
 no-loc: [active]
 description: Reference article for the active command, which on basic disks, marks the partition with focus as active.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/add-alias.md b/WindowsServerDocs/administration/windows-commands/add-alias.md
@@ -3,8 +3,8 @@ title: add alias
 no-loc: [add alias]
 description: Reference article for the add alias command, which adds aliases to the alias environment.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/add-volume.md b/WindowsServerDocs/administration/windows-commands/add-volume.md
@@ -3,8 +3,8 @@ title: add volume
 no-loc: [add volume]
 description: Reference article for the add volume command, which adds volumes to the shadow copy Set, which is the set of volumes to be shadow copied.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/add.md b/WindowsServerDocs/administration/windows-commands/add.md
@@ -3,8 +3,8 @@ title: add (diskshadow)
 no-loc: [add (diskshadow)]
 description: Reference article for the add command, which adds volumes to the set of volumes that are to be shadow copied, or adds aliases to the alias environment.
 ms.topic: reference
-ms.author: alalve
-author: xelu86
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/13/2023
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/add_2.md b/WindowsServerDocs/administration/windows-commands/add_2.md
@@ -3,8 +3,8 @@ title: add
 no-loc: [add]
 description: Reference article for the add command, which adds a disk or volume in an existing RAID configuration.
 ms.topic: reference
-ms.author: alalve
-author: xelu86
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/12/2023
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/adprep.md b/WindowsServerDocs/administration/windows-commands/adprep.md
@@ -3,8 +3,8 @@ title: Adprep
 no-loc: [Adprep]
 description: Learn about adprep command line tool to prepare a forest and domain for a domain controller for Windows Server.
 ms.topic: reference
-author: meaghanlewis
-ms.author: mosagie 
+author: dknappettmsft
+ms.author: daknappe
 ms.date: 04/22/2024
 
 ---
@@ -23,9 +23,9 @@ For more information about running `Adprep.exe` and how to resolve errors that c
 
 For examples of how this command can be used, see [Examples](#examples).
 
-For more information about running `adprep /forestprep`, see [Prepare a Windows 2000 or Windows Server 2003 Forest Schema for a Domain Controller that Runs Windows Server 2008 or Windows Server 2008 R2](/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc753437(v=ws.10)).
+For more information about running `adprep /forestprep`, see [Prepare a Windows 2000 or Windows Server 2003 Forest Schema for a Domain Controller that Runs Windows Server 2008 or Windows Server 2008 R2](/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc753437(v=ws.10)).
 
-For more information about running `adprep /domainprep /gpprep`, see [Prepare a Windows 2000 or Windows Server 2003 Domain for a Domain Controller That Runs Windows Server 2008 or Windows Server 2008 R2](/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc754670(v=ws.10)).
+For more information about running `adprep /domainprep /gpprep`, see [Prepare a Windows 2000 or Windows Server 2003 Domain for a Domain Controller That Runs Windows Server 2008 or Windows Server 2008 R2](/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc754670(v=ws.10)).
 
 For more information about running `adprep /rodcprep`, see [Prepare a Forest for a Read-Only Domain Controller](/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc771055(v=ws.10)).
 
@@ -40,7 +40,7 @@ adprep {/forestprep | /domainprep | /domainprep /gpprep | /rodcprep | /wssg | /s
 |---|---|
 | /forestprep | <p>Prepares a forest for the introduction of a domain controller that runs Windows Server. You run this command only once in the forest. You must run this command on the domain controller that holds the schema operations master role (also known as flexible single master operations or FSMO) for the forest. You must be a member of all the following groups to run this command:</p><p><ul><li>The Enterprise Admins group</li><li>The Schema Admins group</li><li>The Domain Admins group of the domain that hosts the schema master</li></ul></p> |
 | /domainprep | <p>Prepares a domain for the introduction of a domain controller that runs Windows Server. You run this command after the **forestprep** command finishes and after the changes replicate to all the domain controllers in the forest.</p><p>Run this command in each domain where you plan to add a domain controller that runs Windows Server. You must run this command on the domain controller that holds the infrastructure operations master role for the domain. You must be a member of the Domain Admins group to run this command.</p> |
-| <p>/domainprep <p>/gpprep | <p>Performs similar updates to **domainprep**. However, this command also provides updates that are necessary to enable the Resultant Set of Policy (RSOP) Planning Mode functionality. <p>In Active Directory environments that run Microsoft Windows, this command performs updates during off-peak hours. Replicating updates to file system permissions and Active Directory permissions on existing Group Policy objects (GPOs) during off-peak hours minimizes replication traffic. <p>Run this command after the **forestprep** command finishes and after the changes replicate to all domain controllers in the forest. You must run this command on the infrastructure master for the domain. For more information about running this command in Windows Active Directory environments, see [Prepare Your Infrastructure for Upgrade](/previous-versions/windows/it-pro/windows-server-2003/cc783495(v=ws.10)). |
+| <p>/domainprep <p>/gpprep | <p>Performs similar updates to **domainprep**. However, this command also provides updates that are necessary to enable the Resultant Set of Policy (RSOP) Planning Mode functionality. <p>In Active Directory environments that run Microsoft Windows, this command performs updates during off-peak hours. Replicating updates to file system permissions and Active Directory permissions on existing Group Policy objects (GPOs) during off-peak hours minimizes replication traffic. <p>Run this command after the **forestprep** command finishes and after the changes replicate to all domain controllers in the forest. You must run this command on the infrastructure master for the domain. For more information about running this command in Windows Active Directory environments, see [Prepare Your Infrastructure for Upgrade](/previous-versions/windows/it-pro/windows-server-2003/cc783495(v=ws.10)). |
 | /rodcprep | This parameter updates permissions on the application directory partitions to enable replication of the partitions to read-only domain controllers (RODCs). This operation runs remotely; it contacts the infrastructure master in each domain to update the permissions. You need to run this command only once in the forest. However, you can rerun this command anytime if it fails to complete successfully because an infrastructure master isn't available. You can run this command on any computer in the forest. You must be a member of the Enterprise Admins group to run this command. |
 | /wssg | Returns an expanded set of exit codes, instead of just 0 (Success) and 1 (Failure). |
 | /silent | Specifies that no standard output is returned from an operation. This parameter can be used only if /wssg is also used. |
@@ -50,7 +50,7 @@ adprep {/forestprep | /domainprep | /domainprep /gpprep | /rodcprep | /wssg | /s
 
 ## Remarks
 
-- To prepare an existing Windows or Windows Server Active Directory environment for a Windows Server domain controller, run the version of adprep included in the Windows Server installation media.
+- To prepare an existing Windows or Windows Server Active Directory environment for a Windows Server domain controller, run the version of adprep included in the Windows Server installation media.
 
 - You can also perform verification steps before and after you run the **adprep** command to help ensure that the operations complete successfully. For more information, see [Steps for Extending the Schema](/previous-versions/windows/it-pro/windows-server-2003/cc773360(v=ws.10)).
 

diff --git a/WindowsServerDocs/administration/windows-commands/append.md b/WindowsServerDocs/administration/windows-commands/append.md
@@ -3,8 +3,8 @@ title: append
 no-loc: [append]
 description: Reference article for the append command, which allows programs to open data files in specified directories, as if they were in the current directory.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/arp.md b/WindowsServerDocs/administration/windows-commands/arp.md
@@ -2,8 +2,8 @@
 title: arp
 description: Reference article for the arp command, which displays and modifies entries in the Address Resolution Protocol (arp) cache used to store IP addresses and their resolved physical addresses in Windows.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 08/15/2025
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/assign.md b/WindowsServerDocs/administration/windows-commands/assign.md
@@ -3,8 +3,8 @@ title: assign
 no-loc: [assign]
 description: Reference article for the assign command, which assigns a drive letter or mount point to the volume with focus.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/assoc.md b/WindowsServerDocs/administration/windows-commands/assoc.md
@@ -3,8 +3,8 @@ title: assoc
 no-loc: [assoc]
 description: Reference article for the assoc command, which displays or modifies file name extension associations.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/at.md b/WindowsServerDocs/administration/windows-commands/at.md
@@ -3,8 +3,8 @@ title: at
 no-loc: [at]
 description: Reference article for the at command, which schedules commands and programs to run on a computer at a specified time and date.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/atmadm.md b/WindowsServerDocs/administration/windows-commands/atmadm.md
@@ -2,8 +2,8 @@
 title: atmadm
 description: Reference article for the atmadm command, which monitors connections and addresses that are registered by the atM call Manager on an asynchronous transfer mode (atM) network.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 # atmadm

diff --git a/WindowsServerDocs/administration/windows-commands/attach-vdisk.md b/WindowsServerDocs/administration/windows-commands/attach-vdisk.md
@@ -2,8 +2,8 @@
 title: attach vdisk
 description: Reference article for the attach vdisk command, which attaches (sometimes called mounts or surfaces) a virtual hard disk (VHD) so that it appears on the host computer as a local hard disk drive.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 # attach vdisk

diff --git a/WindowsServerDocs/administration/windows-commands/attrib.md b/WindowsServerDocs/administration/windows-commands/attrib.md
@@ -2,8 +2,8 @@
 title: attrib
 description: Reference article for the attrib command that displays, sets, or removes attributes assigned to files or directories.
 ms.topic: reference
-ms.author: alalve
-author: xelu86
+ms.author: roharwoo
+author: robinharwood
 ms.date: 09/22/2023
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/attributes-disk.md b/WindowsServerDocs/administration/windows-commands/attributes-disk.md
@@ -2,8 +2,8 @@
 title: attributes disk
 description: Reference article for the attributes disk command, which displays, sets, or clears the attributes of a disk.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/attributes-volume.md b/WindowsServerDocs/administration/windows-commands/attributes-volume.md
@@ -2,8 +2,8 @@
 title: attributes volume
 description: Reference article for the attributes volume command, which displays, sets, or clears the attributes of a volume.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/16/2017
 ---
 # attributes volume

diff --git a/WindowsServerDocs/administration/windows-commands/attributes.md b/WindowsServerDocs/administration/windows-commands/attributes.md
@@ -2,8 +2,8 @@
 title: attributes
 description: Reference article for the attributes command, which displays, sets, or clears the attributes of a disk or volume.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol-backup.md b/WindowsServerDocs/administration/windows-commands/auditpol-backup.md
@@ -2,8 +2,8 @@
 title: auditpol backup
 description: Reference article for the auditpol backup command that backs up system audit policy settings, per-user audit policy settings for all users, and all auditing options to a comma-separated value (CSV) text file.
 ms.topic: reference
-author: meaghanlewis
-ms.author: mosagie
+author: robinharwood
+ms.author: roharwoo
 ms.date: 04/01/2023
 ---
 # auditpol backup

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol-clear.md b/WindowsServerDocs/administration/windows-commands/auditpol-clear.md
@@ -2,8 +2,8 @@
 title: auditpol clear
 description: Reference article for the auditpol clear command, which deletes the per-user audit policy for all users, resets (disables) the system audit policy for all subcategories, and sets all the auditing options to disabled.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/16/2017
 ---
 # auditpol clear

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol-get.md b/WindowsServerDocs/administration/windows-commands/auditpol-get.md
@@ -2,8 +2,8 @@
 title: auditpol get
 description: Reference article for the auditpol get command, which retrieves the system policy, per-user policy, auditing options, and audit security descriptor object.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/16/2017
 ---
 # auditpol get

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol-list.md b/WindowsServerDocs/administration/windows-commands/auditpol-list.md
@@ -2,8 +2,8 @@
 title: auditpol list
 description: Reference article for the auditpol list command, which lists audit policy categories and subcategories, or lists users for whom a per-user audit policy is defined.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/16/2017
 ---
 # auditpol list

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol-remove.md b/WindowsServerDocs/administration/windows-commands/auditpol-remove.md
@@ -2,8 +2,8 @@
 title: auditpol remove
 description: Reference article for the auditpol remove command; auditpol removes the per-user audit policy for a specified account or all accounts.
 ms.topic: reference
-author: meaghanlewis
-ms.author: mosagie
+author: dknappettmsft
+ms.author: daknappe
 ms.date: 04/01/2023
 ---
 # auditpol remove

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol-resourcesacl.md b/WindowsServerDocs/administration/windows-commands/auditpol-resourcesacl.md
@@ -2,8 +2,8 @@
 title: auditpol resourceSACL
 description: Reference article for the auditpol resourceSACL command, which configures global resource system access control lists (SAcls).
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol-restore.md b/WindowsServerDocs/administration/windows-commands/auditpol-restore.md
@@ -2,8 +2,8 @@
 title: auditpol restore
 description: Reference article for the auditpol restore command, which restores system audit policy settings, per-user audit policy settings for all users, and all auditing options from a file that is syntactically consistent with the comma-separated value (CSV) file format used by the /backup option.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/16/2017
 ---
 # auditpol restore

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol-set.md b/WindowsServerDocs/administration/windows-commands/auditpol-set.md
@@ -2,8 +2,8 @@
 title: auditpol set
 description: Reference article for the auditpol set command, which sets the per-user audit policy, system audit policy, or auditing options.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 # auditpol set

diff --git a/WindowsServerDocs/administration/windows-commands/auditpol.md b/WindowsServerDocs/administration/windows-commands/auditpol.md
@@ -2,8 +2,8 @@
 title: auditpol
 description: Reference article for the auditpol command, which displays information about and performs functions to manipulate audit policies.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/autochk.md b/WindowsServerDocs/administration/windows-commands/autochk.md
@@ -2,8 +2,8 @@
 title: autochk
 description: Reference article for the autochk command, which runs when the computer is started and prior to Windows Server starting to verify the logical integrity of a file system.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: roharwoo
+author: robinharwood
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/autoconv.md b/WindowsServerDocs/administration/windows-commands/autoconv.md
@@ -2,8 +2,8 @@
 title: autoconv
 description: Reference article for the autoconv command, which converts file allocation table (Fat) and Fat32 volumes to the NTFS file system.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/autofmt.md b/WindowsServerDocs/administration/windows-commands/autofmt.md
@@ -2,8 +2,8 @@
 title: autofmt
 description: Reference article for the autofmt command, which formats a drive or partition when called from the Windows Recovery Console.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/automount.md b/WindowsServerDocs/administration/windows-commands/automount.md
@@ -2,8 +2,8 @@
 title: automount
 description: Reference article for the automount command, which enables or disables the automount feature.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/bcdboot.md b/WindowsServerDocs/administration/windows-commands/bcdboot.md
@@ -2,8 +2,8 @@
 title: bcdboot
 description: Reference article for the bcdboot command, which quickly set up a system partition, or repair the boot environment located on the system partition.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/bcdedit.md b/WindowsServerDocs/administration/windows-commands/bcdedit.md
@@ -2,8 +2,8 @@
 title: bcdedit
 description: Reference article for the bcdedit command, which creates new stores, modify existing stores, and add boot menu parameters.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 05/27/2021
 ---
 

diff --git a/WindowsServerDocs/administration/windows-commands/bdehdcfg-driveinfo.md b/WindowsServerDocs/administration/windows-commands/bdehdcfg-driveinfo.md
@@ -2,8 +2,8 @@
 title: bdehdcfg driveinfo
 description: Reference article for the bdehdcfg driveinfo command, which displays the drive letter, the total size, the maximum free space, and the partition characteristics.
 ms.topic: reference
-ms.author: mosagie
-author: meaghanlewis
+ms.author: daknappe
+author: dknappettmsft
 ms.date: 10/16/2017
 ---
 # bdehdcfg: driveinfo