This is the official firmware for ESP32 (M5StickC Plus2) The Atomic bomb game is the simplest for this device
1)Connect M5 StickC Plus2
2)Open Arduino IDE
3)In Arduino IDE, open File>Settings and in Additional links for Board Manager enter: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json, save and re-enter Arduino IDE
4)Next Go to "Sketch>Connect library" Next choose to connect the .zip file and choose the M5StickCPlus2.zip file from the Repository and confirm and wait for the download and after this, re-enter the Arduino IDE
5)Then in File>Open and select the file T-Bomb.ino then next to it select where the Device is find M5 StickC Plus2 and then go to Flash Requenty and Erase all flash before loading the sketch select Enabled, then next to the check mark select the arrow to the right and wait for loading then turn on the device: Button C (2-3 seconds) and wait for the animation to appear
6)After that connect the piezo element (BUZZER) to GND (Black wire) and (Red wire) to G26
If something is not working properly, does not load or does not work then write to the administrator: abs.mark.photo@gmail.com
The installation is available through the Arduino IDE, so we have every right to change the code for yourself or look at the code, so you can completely trust us! Although we would like to remain anonymous for you and our code, but because we made our own license, you can do this but leave the code Open and leave a commented line: Made by Sliz™ or Made by (You) And taken as a basis from Sliz™