psv_esphaku

PS Vita/TV 3.55-3.60 and 3.63-3.74 HENkaku for NodeMcu board

ESPhaku IP address is 11.22.33.44

Building (Windows)

• Download and install or unpack Arduino IDE (v1.8.19 is recommended)
• Configure IDE to use ESP8266 based board (v3.1.2 is the tested one)
• Clone project repo as "esphaku" and open "esphaku.ino" in the IDE
  • Select the "NodeMCU v1.0 (ESP-12E Module)" as target board
  • Select the "4MB (FS:3MB OTA:~512KB)" as flash size
  • Export firmware as binary file by pressing "Ctrl+Alt+S"
• Run the "0getffs.bat" file and wait for it to complete
  • Requirement: wget.exe
• Connect the ESP8266 based board to your PC now
• Run the "1spiffs.bat" file and wait for it to complete
  • Requirement: mkspiffs.exe
  • Requirement: python3.exe
• Run the "2flash.bat" file and wait for it to complete
  • Requirement: esptool.exe

Usage (PS Vita/TV)

• Connect your PS Vita/TV to the "ESPhaku" access point
• Select the Browser application from the home screen
  • Press Help button (the "B" one) OR
    Screenshot

    
  • Press PS banner (the "D" one) OR
    Screenshot

    
  • Start Browser (the "C" one) and select official PS website bookmark OR
    Screenshot

    
  • Start Browser (the "C" one) and enter something like "/" to the address bar (the "C" one, again)
• Read the text on the screen

Tested boards

• NodeMCU v3 "Lolin" by Wemos (at AliExpress)