reference-designs/eval-ad6676: Add untracked wiki pages

docs/solutions/reference-designs/eval-ad6676/ad6676-wideband_rx_subsystem_ad6676ebz.rst

@@ -0,0 +1,95 @@
+AD6676 : Design Tools and Startup Guide for the AD6676 evaluation board, a high dynamic range, Wideband Receiver
+================================================================================================================
+
+Summary
+-------
+
+This wiki site includes information about the :adi:`ad6676` and the associated evaluation board, the :adi:`AD6676EBZ <en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD6676.html#eb-overview>`.
+
+The :adi:`ad6676` datasheet provides a significant amount of information to aid in understanding the :adi:`ad6676` capabilities and can assist in the evaluation process. The datasheet along with the user guide and other board files provided here should be consulted when using the evaluation board.
+
+The AD6676 is compatible with the :adi:`HSC-ADC-EVALEZ <en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-HSC-ADC-EVALEZ.html#eb-overview>`, the ADI FPGA-Based Data Capture Kit.
+
+The software required to use the AD6676EBZ with the :adi:`HSC-ADC-EVALEZ <en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-HSC-ADC-EVALEZ.html#eb-overview>` capture board can be downloaded at the following Analog Devices ftp site:
+
+`AD6676 Evaluation Software <https://wiki.analog.com/ftp/ftp.analog.com/pub/hsc_adc_apps/ad6676_demo_package>`_
+
+For additional information or questions, send an email to highspeed.converters@analog.com. The user guide describes the AD6676 evaluation board, :adi:`AD6676EBZ <en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD6676.html#eb-overview>`, which provides all of the support circuitry required to operate the part in various modes and configurations. The application software used to interface with the devices is also described.
+
+Features
+--------
+
+-  Full featured evaluation board with FMC connector for the :adi:`AD6676`, a Wideband IF Receiver Subsystem
+-  High Instantaneous dynamic range
+
+   -  IIP up to 36 dBm,
+
+      -  NSD as low as -159 dBFS/Hz,
+
+         -  Noise Figure as low as 13 dB
+         -  Spurious tones < -97 dBFS
+
+-  On chip digital Signal Processing including
+
+   -  NCO and quadrature digital downconverter
+
+      -  Decimation
+
+         -  AGC Configuration
+
+-  SPI interface for setup and control
+-  JESD204B single or dual lane outputs
+-  On-board LDO regulator powered through the FMC interface
+-  MATLAB (R) User Interface provides complete AD6676 configuration based on
+   user entries
+
+Helpful Links
+-------------
+
+-  :adi:`AD6676` data sheet
+-  High Speed ADC Capture Evaluation Kit Rev E (:adi:`HSC-ADC-EVALEZ <en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-HSC-ADC-EVALEZ.html#eb-overview>`)
+-  :adi:`AN-835 Application Note <an-835>`, *Understanding ADC Testing and Evaluation*
+-  :adi:`AN-877 Application Note <an-877>`, *Interfacing to High Speed ADCs via SPI*
+-  :adi:`VRMS / dBm / dBu / dBV Calculator <en/design-center/advanced-selection-and-design-tools/interactive-design-tools/dbconvert.html>`
+-  :adi:`ADI RF Impedance Matching Tool <en/design-center/interactive-design-tools/rf-impedance-matching-calculator.html>`
+-  `ADIsimRF Software <https://form.analog.com/form_pages/rfcomms/adisimrf.aspx>`_
+-  :adi:`ADI RF/IF Transceiver Products Web page <en/rfif-components/rfif-transceivers/products/index.html>`
+-  `AD6676 Wideband IF Receiver Subsystem Linux device driver <https://wiki.analog.com/resources/tools-software/linux-drivers/iio-adc/ad6676>`_
+
+AD6676 Evaluation Platform User Guides
+--------------------------------------
+
+User Guide for the AD6676 `ad6676_evb_rev1_quickstartguide_2015_03_27.pdf <https://wiki.analog.com/_media/resources/eval/user-guides/ad6676_evb_rev1_quickstartguide_2015_03_27.pdf>`_ (UPDATED March 2015)
+
+AD6676 Evaluation Board Files
+-----------------------------
+
+AD6676 Evaluation Board Schematic Board 13029 Rev D `SCHEMATIC [PDF File <https://wiki.analog.com/_media/resources/eval/user-guides/13039d_sch.pdf>`_] AD6676 Evaluation Board Gerber Files Board 13029 Rev D `GERBERS [Zip File <https://wiki.analog.com/_media/resources/eval/user-guides/13039d_gerber.zip>`_] AD6676 Evaluation Board BOM File Board 13029 Rev D `Bill of Material [XLS file <https://wiki.analog.com/_media/resources/eval/user-guides/13039d_bom.xls>`_]
+
+AD6676 Software Files
+---------------------
+
+AD6676 DemoTool Software Installation Files : `AD6676 Evaluation Software <https://wiki.analog.com/ftp/ftp.analog.com/pub/hsc_adc_apps/ad6676_demo_package>`_
+
+AD6676 Evaluation Board HDL Libraries and Project
+-------------------------------------------------
+
+The link below is to an external website which has a project with HDL code that
+can be used with some FPGA development board to interface to the AD6676
+
+`AD6676EVB HDL project documentation <https://analogdevicesinc.github.io/hdl/projects/ad6676evb/index.html>`_ :git-hdl:`External Link to github.com AD6676 library <library/axi_ad6676>` :git-hdl:`External Link to github.com AD6676EVB project <projects/ad6676evb>` `External Link to general ADI github.com website <https://github.com/analogdevicesinc>`_
+
+AD6676 Ibis Model Files
+-----------------------
+
+AD6676 Ibis Model `AD6676 Ibis [ZIP file <https://wiki.analog.com/_media/resources/eval/user-guides/ad6676_ibis.zip>`_]
+
+AD6676 Ibis AMI Model Files
+---------------------------
+
+AD6676 Ibis AMI Model Email highspeed.converters@analog.com to request
+
+AD6676 Matlab R2013a Simulink Model Files
+-----------------------------------------
+
+AD6676 Simulink Model Package `AD6676 Simulink Model <https://wiki.analog.com/ftp/ftp.analog.com/pub/hsc_adc_apps/ad6676_matlab_simulink_model>`_ AD6676 Simulink User's Guide // `AD6676 Simulink User's Guide [pdf file <https://wiki.analog.com/_media/resources/eval/user-guides/AD6676 Simulink User's Guide.pdf>`_]