Add eval-ad488x-fmc doc pages by gadaleantudor · Pull Request #436 · analogdevicesinc/documentation

gadaleantudor · 2026-04-21T09:23:46Z

Type

Documentation
Bug fix
New feature
Continuous integration

Checklist

I have performed a self-review of changes
I have followed the guidelines:
I have used the appropriate roles and directives:
- https://analogdevicesinc.github.io/doctools/docs_guidelines/roles.html
- https://analogdevicesinc.github.io/doctools/docs_guidelines/directives.html
I ensured that binary data was committed to git lfs:
- https://analogdevicesinc.github.io/documentation/contributing/creating_new_pages.html#adding-images-and-other-binary-files
I have built the pages I edited or created, using either make html or adoc serve:
- https://analogdevicesinc.github.io/doctools/cli.html#serve
I have signed-off my commits and believe my contribution improves the repository.

https://analogdevicesinc.github.io/documentation/pull/436

StancaPop · 2026-04-21T10:59:32Z

+===============================================================================
+
+The Quick Start Guides provide simple step by step instructions on how to do
+an initial system setup for the :adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`


Suggested change

an initial system setup for the :adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`

an initial system setup for the :adi:`EVAL-AD488X-FMC <eval-ad4884>`

Here is a suggestion

StancaPop · 2026-04-21T10:59:56Z

+Supported carriers
+-------------------------------------------------------------------------------
+
+The :adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`, is, by definition a "FPGA


Fix this link as well (shorten it)

StancaPop · 2026-04-21T11:00:08Z

+Hardware setup
+-------------------------------------------------------------------------------
+
+On most carriers, the :adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>` board


StancaPop · 2026-04-21T11:00:20Z

+===============================================================================
+
+This guide provides quick instructions on how to set up the
+:adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>` on:


StancaPop · 2026-04-21T11:00:31Z

+
+- `ZedBoard <https://digilent.com/reference/programmable-logic/zedboard/start>`__
+  Rev C or later
+- :adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>` FMC board


StancaPop · 2026-04-21T11:00:56Z

+
+Full specifications on the :adi:`AD4880` and :adi:`AD4884` are
+available in the respective data sheets and must be consulted
+with this user guide when using the :adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`


StancaPop · 2026-04-21T11:01:15Z

+     - :adi:`EVAL-AD4884 product page <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`
+
+     - :adi:`AD4880 Datasheet <media/en/technical-documentation/data-sheets/ad4880.pdf>`
+
+     - :adi:`AD4884 Datasheet <media/en/technical-documentation/data-sheets/ad4884.pdf>`


Suggested change

- :adi:`EVAL-AD4884 product page <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`

- :adi:`AD4880 Datasheet <media/en/technical-documentation/data-sheets/ad4880.pdf>`

- :adi:`AD4884 Datasheet <media/en/technical-documentation/data-sheets/ad4884.pdf>`

- :adi:`EVAL-AD4884 product page <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`

- :adi:`AD4880 Datasheet <media/en/technical-documentation/data-sheets/ad4880.pdf>`

- :adi:`AD4884 Datasheet <media/en/technical-documentation/data-sheets/ad4884.pdf>`

StancaPop · 2026-04-21T11:01:50Z

+-------------------------------------------------------------------------------
+
+#. The AD488X-based evaluation board:
+   :adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`


StancaPop · 2026-04-21T11:02:20Z

+===============================================================================
+
+The complete user guide of the evaluation board can be found at
+:adi:`EVAL-AD4884 User Guide <media/en/technical-documentation/user-guides/eval-ad4884.pdf>`.


This is the link to the user guide, not the product page.

StancaPop · 2026-04-21T11:03:05Z

+The input stage for each :adi:`AD4884` channel consists of a pair
+of :adi:`LT6236` op amps. The LT6236 is selected for its
+wideband (90 MHz), low noise, favorable distortion performance
+and low power consumption. The op amps are set up as
+unity-gain buffers, ensuring that a preceding signal source or
+sensor is presented with a high impedance. With supply rail
+values of +5 V and -5 V, the valid range at each input of this
+stage is -3 V to +3.7 V.


Looks like in this file, the text wrapping is not bounded to 80 characters, but rather a smaller number. Can you adjust this?

Signed-off-by: Tudor Gadalean <Tudor.Gadalean@analog.com>

https://analogdevicesinc.github.io/documentation/pull/436

StancaPop

Looks good to me. Needs technical review.

StancaPop · 2026-04-24T14:53:35Z

Added @PopPaul2021 for technical review.

gadaleantudor added the human This content was made by a human label Apr 21, 2026

gadaleantudor requested a review from StancaPop April 21, 2026 09:25

github-actions Bot added a commit that referenced this pull request Apr 21, 2026

deploy: 0c23c84 #436 (opened)

e69879f

https://analogdevicesinc.github.io/documentation/pull/436

StancaPop self-assigned this Apr 21, 2026

StancaPop requested changes Apr 21, 2026

View reviewed changes

Add eval-ad488x-fmc doc pages

f47a636

Signed-off-by: Tudor Gadalean <Tudor.Gadalean@analog.com>

gadaleantudor force-pushed the add_ad488x_fmc_evb_docs branch from e7457d6 to f47a636 Compare April 23, 2026 09:41

github-actions Bot added a commit that referenced this pull request Apr 23, 2026

deploy: 9e5c95e #436 (synchronize)

efe8b04

https://analogdevicesinc.github.io/documentation/pull/436

StancaPop approved these changes Apr 23, 2026

View reviewed changes

StancaPop requested a review from PopPaul2021 April 24, 2026 14:53

	an initial system setup for the :adi:`EVAL-AD488X-FMC <en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad4884.html>`
	an initial system setup for the :adi:`EVAL-AD488X-FMC <eval-ad4884>`

Conversation

gadaleantudor commented Apr 21, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Type

Checklist

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

StancaPop left a comment

Choose a reason for hiding this comment

Uh oh!

StancaPop commented Apr 24, 2026

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

gadaleantudor commented Apr 21, 2026 •

edited

Loading