Fix pull-up resistor for Portenta H7, RP2040, Giga and Nicla Vision

[fabik111]

On some Portenta H7, RP2040, Giga, and Nicla Vision boards, the pull-up resistor of the reconfiguration pin is cleared after attaching the interrupt callback.

This puts the pin in a floating state that triggers the reconfiguration procedure erroneously.

To solve this issue, the pull-up resistor is enabled again after the attachInterrupt call.

[codecov]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 90.27%. Comparing base (4aea50a) to head (6dbfd09).
⚠️ Report is 4 commits behind head on main.

Additional details and impacted files

@@           Coverage Diff           @@
##             main      #29   +/-   ##
=======================================
  Coverage   90.27%   90.27%           
=======================================
  Files           7        7           
  Lines         720      720           
  Branches       86       86           
=======================================
  Hits          650      650           
  Misses         70       70           

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[github-actions]

Memory usage change @ 6dbfd09

Board	flash	%	RAM for global variables	%
arduino:mbed_giga:giga	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:mbed_nano:nanorp2040connect	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:mbed_nicla:nicla_vision	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:mbed_opta:opta	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:mbed_portenta:envie_m7	N/A	N/A	N/A	N/A
arduino:renesas_portenta:portenta_c33	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:renesas_uno:unor4wifi	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwifi1010	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:nano_33_iot	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0

Click for full report table

Board	examples/NetworkConfiguratorDemo flash	%	examples/NetworkConfiguratorDemo RAM for global variables	%	examples/utility/DeleteConfiguration flash	%	examples/utility/DeleteConfiguration RAM for global variables	%
arduino:mbed_giga:giga	0	0.0	0	0.0	0	0.0	0	0.0
arduino:mbed_nano:nanorp2040connect	0	0.0	0	0.0	0	0.0	0	0.0
arduino:mbed_nicla:nicla_vision	0	0.0	0	0.0	0	0.0	0	0.0
arduino:mbed_opta:opta	0	0.0	0	0.0	0	0.0	0	0.0
arduino:mbed_portenta:envie_m7	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A
arduino:renesas_portenta:portenta_c33	0	0.0	0	0.0	0	0.0	0	0.0
arduino:renesas_uno:unor4wifi	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwifi1010	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:nano_33_iot	0	0.0	0	0.0	0	0.0	0	0.0

Click for full report CSV

Board,examples/NetworkConfiguratorDemo<br>flash,%,examples/NetworkConfiguratorDemo<br>RAM for global variables,%,examples/utility/DeleteConfiguration<br>flash,%,examples/utility/DeleteConfiguration<br>RAM for global variables,%
arduino:mbed_giga:giga,0,0.0,0,0.0,0,0.0,0,0.0
arduino:mbed_nano:nanorp2040connect,0,0.0,0,0.0,0,0.0,0,0.0
arduino:mbed_nicla:nicla_vision,0,0.0,0,0.0,0,0.0,0,0.0
arduino:mbed_opta:opta,0,0.0,0,0.0,0,0.0,0,0.0
arduino:mbed_portenta:envie_m7,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A
arduino:renesas_portenta:portenta_c33,0,0.0,0,0.0,0,0.0,0,0.0
arduino:renesas_uno:unor4wifi,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrwifi1010,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:nano_33_iot,0,0.0,0,0.0,0,0.0,0,0.0