Skip to content

Fix TOC URLs [HC-1670] #508

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 7 commits into from
Jul 30, 2025
Merged

Fix TOC URLs [HC-1670] #508

Changes from all commits
Commits
Show all changes
7 commits
Select commit Hold shift + click to select a range
ba63102
Remove comment
seaxwi Jul 16, 2025
3d6f403
Fix anchor links
seaxwi Jul 16, 2025
0c69fff
Remove comments
seaxwi Jul 16, 2025
4dc0afe
Update .lycheeignore
seaxwi Jul 16, 2025
d002fc3
Merge branch 'main' into fix-urls
seaxwi Jul 30, 2025
c9e8b44
Fix TOC
seaxwi Jul 30, 2025
81b0533
Use consistent list style
seaxwi Jul 30, 2025
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
16 changes: 8 additions & 8 deletions ...port/Nano Family/Supply-USB-power-via-the-VUSB-VBUS-or-5V-pin-on-Nano-boards.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -7,9 +7,9 @@ Many Arduino Nano boards are powered by 3.3 V but include a dedicated pin—labe

In this article:

* [Before you begin](#before-you-begin)
* [Solder VUSB jumper pads (if required)](#solder-vusb-jumper-pads)
* [Use the VUSB or VBUS Pin](#use-the-vusb-or-vbus-pin)
- [Before you begin](#before-you-begin)
- [Requirements for supported boards](#requirements-for-supported-boards)
- [Solder VUSB jumper pads if required](#solder-vusb-jumper-pads)

---

Expand All @@ -18,18 +18,18 @@ In this article:
> [!WARNING]
> Do not connect the VUSB/VBUS/5V pin to any of the other pins on the board.

* The VUSB/VBUS/5V pin outputs power directly from the USB connector when enabled.
* Power from the USB supply can range from 4.4 V to 5.5 V, per USB specifications.
* Do not connect the VUSB/VBUS/5V pin to any of the other pins on the board. Supplying 5 V to other pins can permanently damage the board.
- The VUSB/VBUS/5V pin outputs power directly from the USB connector when enabled.
- Power from the USB supply can range from 4.4 V to 5.5 V, per USB specifications.
- Do not connect the VUSB/VBUS/5V pin to any of the other pins on the board. Supplying 5 V to other pins can permanently damage the board.

---

## Requirements for supported boards

There are two main requirements for using the "VUSB" pin:

* The board must be powered via USB. If you power the board through other means—such as a battery connected to Vin or a 3.3 V supply—the pin will not output anything.
* On some boards, the VUSB line must be enabled by connecting a pair of jumper pads.
- The board must be powered via USB. If you power the board through other means—such as a battery connected to Vin or a 3.3 V supply—the pin will not output anything.
- On some boards, the VUSB line must be enabled by connecting a pair of jumper pads.

The table below summarizes which Nano boards support 5 V output, what the output pin is called, and whether any action is required to enable it.

Expand Down
Loading