ERGODOX #2
Open
ERGODOX #2
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This will allow the right hand of the Ergodox to be flipped and used as the left hand. In this scenario the teensy should be soldered with its bottom facing up on the top of the left hand PCB. Because doing this obscures the teensy mounted reset button, I have added pads for an optional reset switch that can be used from the bottom of a left hand only Ergodox. Reset switch part number: OMRON B3U-1000P
Adding support for reversible female USB Port and optional reset switch.
Almost all DXF files had some loops in it (lines or dots that were not connected to anything else). That was a problem, as most laser cutter will act weirdly because of that. Fixing this allow laser cutter to do the cut in one smooth line, and not try to leave some very close gaps because some dots were not connected. Files were imported then exported using Fusion 360. It seems that they have been vastly re-written, but as the DXF format has been invented by Autodesk, it should be ok and readable by other CAD softwares. You can see an example of the loops in one file here : https://imgur.com/zZA2Odz This is checked using an addin called Sketch Checker in Fusion 360.
Fixing all loops in all dxf files
Right hand was 10 times bigger than left hand. Also replaces commas by dots as decimal separator.
[case] Fix right hand size
[case] Fix right hand scale
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
5 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
ErgoDox Acrylic Case/ErgoDOX Acrylic Case - Designed by Litster/Standard/Left/ErgoDOX Case Layer 1 Top - Left.dxf