Raspberry PI Monitoring Dashboard

A lightweight & minimalistic monitoring dashboard for Raspberry Pi

Installation on the Raspberry Pi

• Install nodejs on your pi using the below command

  curl -sL https://deb.nodesource.com/setup_14.x | sudo bash -
  sudo apt install -y nodejs
  sudo apt purge -y nodejs.*

• Install git on your pi using the below command

  sudo apt update
  sudo apt-get install git

• Then clone the repo

  mkdir ~/PiDash
  cd ~/PiDash
  git clone https://github.com/babanomania/PiDash.git .

• Run the nodejs server and test

  make install port=8080

  Then, Open http://192.168.0.109:8080 with your browser where 192.168.0.109 is your PI's ip.

• For updating the code use the below command

  make upgrade port=8080

That's it! Your PiDash service is currently up and running and in case of a restart it will start automatically when the system boots.