6.12 gmsl upstream #1
Open
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
67f2bdb i2c: use inclusive callbacks in struct i2c_algorithm
9ce0ab4 regmap: provide regmap_assign_bits()
9a329a7 media: v4l: Support passing media pad argument to v4l2_get_link_freq()
67f7e85 media: v4l: Support obtaining link frequency via get_mbus_config
d594cd6 gpiolib: make value setters have return values
2ebfd57 maxim_serdes: Fix backport compile error on namespace
|
Internal source pads will be used as routing endpoints in V4L2 [GS]_ROUTING IOCTLs, to indicate that the stream begins in the entity. Internal source pads are pads that have both SINK and INTERNAL flags set. Also prevent creating links to pads that have been flagged as internal and initialising SOURCE pads with INTERNAL flag set. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Analog Devices is taking responsability for the maintenance of the Maxim GMSL2/3 devices. Add myself to the maintainers list and to the device tree bindings. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
MAX96717 is capable of address translation for the connected I2C slaves. Add support for I2C ATR while keeping I2C gate for compatibility to support this usecase. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
MAX96717 is capable of configuring various pin properties. Add pinctrl/pinconf properties to support this usecase. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
MAX9295A is an older variant of the MAX96717 which does not support tunnel mode. Document the compatibility. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
MAX96793 is a newer variant of the MAX96717 which also supports GMSL3 links. Document this compatibility. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
Analog Devices is taking responsability for the maintenance of the Maxim GMSL2/3 devices. Add myself to the maintainers list and to the device tree bindings. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
The MAX96712 and MAX96724 support up to 4 separate PHYs, depending on the selected PHY configuration. Use patternProperties to document this. The input ports are all the same, use patternProperties for them. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
MAX96712 and MAX96724 have more than one GMSL2 link, and each link is capable of connecting to a separate serializer. If these serializers have the same CFG pins configuration, they will also have the same I2C address, causing conflicts unless the deserializer changes the address of the connected serializers. The MAX96712 and MAX96724 support changing the I2C address of the connected serializers. Document this capability. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
The GMSL links can carry power to the serializer when using coaxial cables. Document this capability. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Analog Devices is taking responsability for the maintenance of the Maxim GMSL2/3 devices. Add myself to the maintainers list and to the device tree bindings. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
MAX96714R is a lower capability variant of the MAX96714 which only supports a fixed rate of 3Gbps in the forward direction. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
The MAX9296A deserializer converts single or dual serial inputs to MIPI CSI-2 outputs. The GMSL2 links operate at a fixed rate of 3Gbps or 6Gbps in the forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, each serial link can be paired with 3.12Gbps or 1.5Gbps GMSL1 serializers or operate up to 4.5Gbps with GMSL2 serializers with GMSL1 backward compatibility. The MAX9296A supports mixed GMSL2 and GMSL1 links. The serial inputs operate independently, allowing videos with different timings and resolutions to be received on each input. MAX96716A supports both tunnel and pixel mode. MAX96792A supports both tunnel and pixel mode, and has two GMSL3 links. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
These drivers are meant to be used as a common framework for Maxim GMSL2/3 serializers and deserializers. This framework enables support for the following new features across all the chips: * Full Streams API support * .get_frame_desc() * .get_mbus_config() * I2C ATR * automatic GMSL link version negotiation * automatic stream id selection * automatic VC remapping * automatic pixel mode / tunnel mode selection * automatic double mode selection / data padding * logging of internal state and chip status registers via .log_status() * PHY modes * serializer pinctrl * TPG Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
These drivers are meant to be used as a common framework for Maxim GMSL2/3 serializers. This framework enables support for the following new features across all the chips: * Full Streams API support * .get_frame_desc() * .get_mbus_config() * I2C ATR * automatic GMSL link version negotiation * automatic stream id selection * automatic VC remapping * automatic pixel mode / tunnel mode selection * automatic double mode selection / data padding * logging of internal state and chip status registers via .log_status() * PHY modes * serializer pinctrl * TPG Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
These drivers are meant to be used as a common framework for Maxim GMSL2/3 deserializer. This framework enables support for the following new features across all the chips: * Full Streams API support * .get_frame_desc() * .get_mbus_config() * I2C ATR * automatic GMSL link version negotiation * automatic stream id selection * automatic VC remapping * automatic pixel mode / tunnel mode selection * automatic double mode selection / data padding * logging of internal state and chip status registers via .log_status() * PHY modes * serializer pinctrl * TPG Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Add a new MAX96717 driver that also supports MAX9295A, MAX96717F and MAX96793. Integrate it with the common serializer framework, while keeping compatibility with existing usecases, avoiding code duplication, and also enabling more features across all chips. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Add a new MAX96724 driver that also supports MAX96712, MAX96724F and MAX96724R. Integrate it with the common deserializer framework, while keeping compatibility with existing usecases, avoiding code duplication, and also enabling more features across all chips. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Add a new MAX9296A driver that also supports MAX96714, MAX96714F, MAX96714R, MAX96716A and MAX96792A. Integrate it with the common Deserializer framework, while keeping compatibility with existing usecases, avoiding code duplication, and also enabling more features across all chips. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
The staging MAX96712 driver will be removed as its functionality has been moved to the MAX96724 driver which makes use of the Maxim GMSL2/3 deserializer framework. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Remove the staging MAX96712 driver. Its functionality has been moved to the MAX96724 driver which makes use of the Maxim GMSL2/3 deserializer framework. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
The previous MAX96717 driver has been removed and its functionality has been moved to a MAX96717 driver which makes use of the Maxim GMSL2/3 serializer framework. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
The previous MAX96714 driver has been removed and its functionality has been moved to the MAX9296A driver which makes use of the Maxim GMSL2/3 serializer framework. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
The ds90ub960 driver currently uses a list of i2c_client structs to keep track of used I2C address translator (ATR) alias slots for each RX port. Keeping these i2c_client structs in the alias slot list isn't actually needed, the driver only needs to know the client address for each slot. Convert the aliased_clients list to a list of aliased client addresses. This will allow removing the "client" parameter from the i2c-atr callbacks in a future patch. Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The aliased_addrs list represents the occupation of an RX port's hardware alias table. This list and the underlying hardware table are only accessed in the attach/detach_client() callbacks. These functions are only called from a bus notifier handler in i2c-atr.c, which is always called with the notifier chain's semaphore held. This indirectly prevents concurrent access to the aliased_addrs list. However, more explicit and direct locking is preferable. Moreover, with the introduction of dynamic address translation in a future patch, the attach/detach_client() callbacks will be called from outside of the notifier chain's read section. Introduce a mutex to protect access to the aliased_addrs list and its underlying hardware table. Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The I2C Address Translator (ATR) module defines mappings from i2c_client structs to aliases. However, only the physical address of each i2c_client struct is actually relevant to the workings of the ATR module. Moreover, some drivers require address translation functionality but do not allocate i2c_client structs, accessing the adapter directly instead. The SFP subsystem is an example of this. Replace the "i2c_client" field of the i2c_atr_alias_pair struct with a u16 "addr" field. Rewrite helper functions and callbacks as needed. Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Each I2C address translator (ATR) has a pool of client aliases which can be used as translation targets. Some ATRs have a single alias pool shared by all downstream channels, while others have a separate alias pool for each channel. Currently, this alias pool is represented by the "aliases", "num_aliases", and "use_mask" fields of struct i2c_atr. In preparation for adding per-channel alias pool support, move the "aliases", "num_aliases", "use_mask" and associated lock to a new struct called "struct alias_pool". Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The "alias_list" field of struct i2c_atr_chan describes translation table entries programmed in the ATR channel. This terminology will become more confusing when per-channel alias pool support is introduced, as struct i2c_atr_chan will gain a new field called "alias_pool", which will describe aliases which are available to the ATR channel. Rename the "alias_list" field to "alias_pairs" to clearly distinguish it from the future "alias_pool" field. No functional change is intended. Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Some I2C address translators (ATRs) assign each of their remote peripheral aliases to a specific channel. To properly handle these devices, add support for having separate alias pools for each ATR channel. This is achieved by allowing callers of i2c_atr_add_adapter to pass an optional alias list. If present, this list will be used to populate the channel's alias pool. Otherwise, the common alias pool will be used. Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
…ings() Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel(). This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...] Link: https://lkml.kernel.org/r/20250818020206.4517-4-harry.yoo@oracle.com Fixes: 8d40091 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Closes: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@intel.com [1] Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Kiryl Shutsemau <kas@kernel.org> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: bibo mao <maobibo@loongson.cn> Cc: Borislav Betkov <bp@alien8.de> Cc: Christoph Lameter (Ampere) <cl@gentwo.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
sched_numa_find_nth_cpu() uses a bsearch to look for the 'closest' CPU in sched_domains_numa_masks and given cpus mask. However they might not intersect if all CPUs in the cpus mask are offline. bsearch will return NULL in that case, bail out instead of dereferencing a bogus pointer. The previous behaviour lead to this bug when using maxcpus=4 on an rk3399 (LLLLbb) (i.e. booting with all big CPUs offline): [ 1.422922] Unable to handle kernel paging request at virtual address ffffff8000000000 [ 1.423635] Mem abort info: [ 1.423889] ESR = 0x0000000096000006 [ 1.424227] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.424715] SET = 0, FnV = 0 [ 1.424995] EA = 0, S1PTW = 0 [ 1.425279] FSC = 0x06: level 2 translation fault [ 1.425735] Data abort info: [ 1.425998] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 1.426499] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1.426952] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1.427428] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000004a9f000 [ 1.428038] [ffffff8000000000] pgd=18000000f7fff403, p4d=18000000f7fff403, pud=18000000f7fff403, pmd=0000000000000000 [ 1.429014] Internal error: Oops: 0000000096000006 [#1] SMP [ 1.429525] Modules linked in: [ 1.429813] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc4-dirty torvalds#343 PREEMPT [ 1.430559] Hardware name: Pine64 RockPro64 v2.1 (DT) [ 1.431012] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.431634] pc : sched_numa_find_nth_cpu+0x2a0/0x488 [ 1.432094] lr : sched_numa_find_nth_cpu+0x284/0x488 [ 1.432543] sp : ffffffc084e1b960 [ 1.432843] x29: ffffffc084e1b960 x28: ffffff80078a8800 x27: ffffffc0846eb1d0 [ 1.433495] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 1.434144] x23: 0000000000000000 x22: fffffffffff7f093 x21: ffffffc081de6378 [ 1.434792] x20: 0000000000000000 x19: 0000000ffff7f093 x18: 00000000ffffffff [ 1.435441] x17: 3030303866666666 x16: 66663d736b73616d x15: ffffffc104e1b5b7 [ 1.436091] x14: 0000000000000000 x13: ffffffc084712860 x12: 0000000000000372 [ 1.436739] x11: 0000000000000126 x10: ffffffc08476a860 x9 : ffffffc084712860 [ 1.437389] x8 : 00000000ffffefff x7 : ffffffc08476a860 x6 : 0000000000000000 [ 1.438036] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 1.438683] x2 : 0000000000000000 x1 : ffffffc0846eb000 x0 : ffffff8000407b68 [ 1.439332] Call trace: [ 1.439559] sched_numa_find_nth_cpu+0x2a0/0x488 (P) [ 1.440016] smp_call_function_any+0xc8/0xd0 [ 1.440416] armv8_pmu_init+0x58/0x27c [ 1.440770] armv8_cortex_a72_pmu_init+0x20/0x2c [ 1.441199] arm_pmu_device_probe+0x1e4/0x5e8 [ 1.441603] armv8_pmu_device_probe+0x1c/0x28 [ 1.442007] platform_probe+0x5c/0xac [ 1.442347] really_probe+0xbc/0x298 [ 1.442683] __driver_probe_device+0x78/0x12c [ 1.443087] driver_probe_device+0xdc/0x160 [ 1.443475] __driver_attach+0x94/0x19c [ 1.443833] bus_for_each_dev+0x74/0xd4 [ 1.444190] driver_attach+0x24/0x30 [ 1.444525] bus_add_driver+0xe4/0x208 [ 1.444874] driver_register+0x60/0x128 [ 1.445233] __platform_driver_register+0x24/0x30 [ 1.445662] armv8_pmu_driver_init+0x28/0x4c [ 1.446059] do_one_initcall+0x44/0x25c [ 1.446416] kernel_init_freeable+0x1dc/0x3bc [ 1.446820] kernel_init+0x20/0x1d8 [ 1.447151] ret_from_fork+0x10/0x20 [ 1.447493] Code: 90022e21 f000e5f5 910de2b5 2a1703e2 (f8767803) [ 1.448040] ---[ end trace 0000000000000000 ]--- [ 1.448483] note: swapper/0[1] exited with preempt_count 1 [ 1.449047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.449741] SMP: stopping secondary CPUs [ 1.450105] Kernel Offset: disabled [ 1.450419] CPU features: 0x000000,00080000,20002001,0400421b [ 1.450935] Memory Limit: none [ 1.451217] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Yury: with the fix, the function returns cpu == nr_cpu_ids, and later in smp_call_function_any -> smp_call_function_single -> generic_exec_single we test the cpu for '>= nr_cpu_ids' and return -ENXIO. So everything is handled correctly. Fixes: cd7f553 ("sched: add sched_numa_find_nth_cpu()") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <christian.loehle@arm.com> Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
tee_shm_put have NULL pointer dereference:
__optee_disable_shm_cache -->
shm = reg_pair_to_ptr(...);//shm maybe return NULL
tee_shm_free(shm); -->
tee_shm_put(shm);//crash
Add check in tee_shm_put to fix it.
panic log:
Unable to handle kernel paging request at virtual address 0000000000100cca
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000002049d07000
[0000000000100cca] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 2 PID: 14442 Comm: systemd-sleep Tainted: P OE ------- ----
6.6.0-39-generic torvalds#38
Source Version: 938b255f6cb8817c95b0dd5c8c2944acfce94b07
Hardware name: greatwall GW-001Y1A-FTH, BIOS Great Wall BIOS V3.0
10/26/2022
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tee_shm_put+0x24/0x188
lr : tee_shm_free+0x14/0x28
sp : ffff001f98f9faf0
x29: ffff001f98f9faf0 x28: ffff0020df543cc0 x27: 0000000000000000
x26: ffff001f811344a0 x25: ffff8000818dac00 x24: ffff800082d8d048
x23: ffff001f850fcd18 x22: 0000000000000001 x21: ffff001f98f9fb88
x20: ffff001f83e76218 x19: ffff001f83e761e0 x18: 000000000000ffff
x17: 303a30303a303030 x16: 0000000000000000 x15: 0000000000000003
x14: 0000000000000001 x13: 0000000000000000 x12: 0101010101010101
x11: 0000000000000001 x10: 0000000000000001 x9 : ffff800080e08d0c
x8 : ffff001f98f9fb88 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff001f83e761e0 x1 : 00000000ffff001f x0 : 0000000000100cca
Call trace:
tee_shm_put+0x24/0x188
tee_shm_free+0x14/0x28
__optee_disable_shm_cache+0xa8/0x108
optee_shutdown+0x28/0x38
platform_shutdown+0x28/0x40
device_shutdown+0x144/0x2b0
kernel_power_off+0x3c/0x80
hibernate+0x35c/0x388
state_store+0x64/0x80
kobj_attr_store+0x14/0x28
sysfs_kf_write+0x48/0x60
kernfs_fop_write_iter+0x128/0x1c0
vfs_write+0x270/0x370
ksys_write+0x6c/0x100
__arm64_sys_write+0x20/0x30
invoke_syscall+0x4c/0x120
el0_svc_common.constprop.0+0x44/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x24/0x88
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x14c/0x15
Fixes: dfd0743 ("tee: handle lookup of shm with reference count 0")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
BUG: kernel NULL pointer dereference, address: 00000000000002ec PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ torvalds#9 NONE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc] ... Call Trace: <TASK> smcr_buf_map_link+0x211/0x2a0 [smc] __smc_buf_create+0x522/0x970 [smc] smc_buf_create+0x3a/0x110 [smc] smc_find_rdma_v2_device_serv+0x18f/0x240 [smc] ? smc_vlan_by_tcpsk+0x7e/0xe0 [smc] smc_listen_find_device+0x1dd/0x2b0 [smc] smc_listen_work+0x30f/0x580 [smc] process_one_work+0x18c/0x340 worker_thread+0x242/0x360 kthread+0xe7/0x220 ret_from_fork+0x13a/0x160 ret_from_fork_asm+0x1a/0x30 </TASK> If the software RoCE device is used, ibdev->dma_device is a null pointer. As a result, the problem occurs. Null pointer detection is added to prevent problems. Fixes: 0ef69e7 ("net/smc: optimize for smc_sndbuf_sync_sg_for_device and smc_rmb_sync_sg_for_cpu") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://patch.msgid.link/20250828124117.2622624-1-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
VXLAN FDB entries can point to either a remote destination or an FDB nexthop group. The latter is usually used in EVPN deployments where learning is disabled. However, when learning is enabled, an incoming packet might try to refresh an FDB entry that points to an FDB nexthop group and therefore does not have a remote. Such packets should be dropped, but they are only dropped after dereferencing the non-existent remote, resulting in a NPD [1] which can be reproduced using [2]. Fix by dropping such packets earlier. Remove the misleading comment from first_remote_rcu(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_snoop+0x98/0x1e0 [...] Call Trace: <TASK> vxlan_encap_bypass+0x209/0x240 encap_bypass_if_local+0xb1/0x100 vxlan_xmit_one+0x1375/0x17e0 vxlan_xmit+0x6b4/0x15f0 dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip address add 192.0.2.2/32 dev lo ip nexthop add id 1 via 192.0.2.3 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020 bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10 mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reported-by: Marlin Cremers <mcremers@cloudbear.nl> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250901065035.159644-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Ido Schimmel says:
====================
vxlan: Fix NPDs when using nexthop objects
With FDB nexthop groups, VXLAN FDB entries do not necessarily point to
a remote destination but rather to an FDB nexthop group. This means that
first_remote_{rcu,rtnl}() can return NULL and a few places in the driver
were not ready for that, resulting in NULL pointer dereferences.
Patches #1-#2 fix these NPDs.
Note that vxlan_fdb_find_uc() still dereferences the remote returned by
first_remote_rcu() without checking that it is not NULL, but this
function is only invoked by a single driver which vetoes the creation of
FDB nexthop groups. I will patch this in net-next to make the code less
fragile.
Patch #3 adds a selftests which exercises these code paths and tests
basic Tx functionality with FDB nexthop groups. I verified that the test
crashes the kernel without the first two patches.
====================
Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
The commit ced17ee ("Revert "virtio: reject shm region if length is zero"") exposes the following DAX page fault bug (this fix the failure that getting shm region alway returns false because of zero length): The commit 21aa65b ("mm: remove callers of pfn_t functionality") handles the DAX physical page address incorrectly: the removed macro 'phys_to_pfn_t()' should be replaced with 'PHYS_PFN()'. [ 1.390321] BUG: unable to handle page fault for address: ffffd3fb40000008 [ 1.390875] #PF: supervisor read access in kernel mode [ 1.391257] #PF: error_code(0x0000) - not-present page [ 1.391509] PGD 0 P4D 0 [ 1.391626] Oops: Oops: 0000 [#1] SMP NOPTI [ 1.391806] CPU: 6 UID: 1000 PID: 162 Comm: weston Not tainted 6.17.0-rc3-WSL2-STABLE #2 PREEMPT(none) [ 1.392361] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.392653] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.393727] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.394003] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.394524] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.394967] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.395400] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.395806] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.396268] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.396715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.397100] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.397518] Call Trace: [ 1.397663] <TASK> [ 1.397900] dax_insert_entry+0x13b/0x390 [ 1.398179] dax_fault_iter+0x2a5/0x6c0 [ 1.398443] dax_iomap_pte_fault+0x193/0x3c0 [ 1.398750] __fuse_dax_fault+0x8b/0x270 [ 1.398997] ? vm_mmap_pgoff+0x161/0x210 [ 1.399175] __do_fault+0x30/0x180 [ 1.399360] do_fault+0xc4/0x550 [ 1.399547] __handle_mm_fault+0x8e3/0xf50 [ 1.399731] ? do_syscall_64+0x72/0x1e0 [ 1.399958] handle_mm_fault+0x192/0x2f0 [ 1.400204] do_user_addr_fault+0x20e/0x700 [ 1.400418] exc_page_fault+0x66/0x150 [ 1.400602] asm_exc_page_fault+0x26/0x30 [ 1.400831] RIP: 0033:0x72596d1bf703 [ 1.401076] Code: 31 f6 45 31 e4 48 8d 15 b3 73 00 00 e8 06 03 00 00 8b 83 68 01 00 00 e9 8e fa ff ff 0f 1f 00 48 8b 44 24 08 4c 89 ee 48 89 df <c7> 00 21 43 34 12 e8 72 09 00 00 e9 6a fa ff ff 0f 1f 44 00 00 e8 [ 1.402172] RSP: 002b:00007ffc350f6dc0 EFLAGS: 00010202 [ 1.402488] RAX: 0000725970e94000 RBX: 00005b7c642c2560 RCX: 0000725970d359a7 [ 1.402898] RDX: 0000000000000003 RSI: 00007ffc350f6dc0 RDI: 00005b7c642c2560 [ 1.403284] RBP: 00007ffc350f6e90 R08: 000000000000000d R09: 0000000000000000 [ 1.403634] R10: 00007ffc350f6dd8 R11: 0000000000000246 R12: 0000000000000001 [ 1.404078] R13: 00007ffc350f6dc0 R14: 0000725970e29ce0 R15: 0000000000000003 [ 1.404450] </TASK> [ 1.404570] Modules linked in: [ 1.404821] CR2: ffffd3fb40000008 [ 1.405029] ---[ end trace 0000000000000000 ]--- [ 1.405323] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.405556] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.406639] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.406910] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.407379] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.407800] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.408246] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.408666] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.409170] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.409608] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.409977] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.410437] Kernel panic - not syncing: Fatal exception [ 1.410857] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 21aa65b ("mm: remove callers of pfn_t functionality") Signed-off-by: Haiyue Wang <haiyuewa@163.com> Link: https://lore.kernel.org/20250904120339.972-1-haiyuewa@163.com Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
A crash was observed with the following output: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 92 Comm: osnoise_cpus Not tainted 6.17.0-rc4-00201-gd69eb204c255 torvalds#138 PREEMPT(voluntary) RIP: 0010:bitmap_parselist+0x53/0x3e0 Call Trace: <TASK> osnoise_cpus_write+0x7a/0x190 vfs_write+0xf8/0x410 ? do_sys_openat2+0x88/0xd0 ksys_write+0x60/0xd0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This issue can be reproduced by below code: fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY); write(fd, "0-2", 0); When user pass 'count=0' to osnoise_cpus_write(), kmalloc() will return ZERO_SIZE_PTR (16) and cpulist_parse() treat it as a normal value, which trigger the null pointer dereference. Add check for the parameter 'count'. Cc: <mhiramat@kernel.org> Cc: <mathieu.desnoyers@efficios.com> Cc: <tglozar@redhat.com> Link: https://lore.kernel.org/20250906035610.3880282-1-wangliang74@huawei.com Fixes: 17f8910 ("tracing/osnoise: Allow arbitrarily long CPU string") Signed-off-by: Wang Liang <wangliang74@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Steven Rostedt reported a crash with "ftrace=function" kernel command line: [ 0.159269] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 0.160254] #PF: supervisor read access in kernel mode [ 0.160975] #PF: error_code(0x0000) - not-present page [ 0.161697] PGD 0 P4D 0 [ 0.162055] Oops: Oops: 0000 [#1] SMP PTI [ 0.162619] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc2-test-00006-g48d06e78b7cb-dirty torvalds#9 PREEMPT(undef) [ 0.164141] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 0.165439] RIP: 0010:kmem_cache_alloc_noprof (mm/slub.c:4237) [ 0.166186] Code: 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fc 53 48 83 e4 f0 48 83 ec 20 8b 05 c9 b6 7e 01 <44> 8b 77 1c 65 4c 8b 2d b5 ea 20 02 4c 89 6c 24 18 41 89 f5 21 f0 [ 0.168811] RSP: 0000:ffffffffb2e03b30 EFLAGS: 00010086 [ 0.169545] RAX: 0000000001fff33f RBX: 0000000000000000 RCX: 0000000000000000 [ 0.170544] RDX: 0000000000002800 RSI: 0000000000002800 RDI: 0000000000000000 [ 0.171554] RBP: ffffffffb2e03b80 R08: 0000000000000004 R09: ffffffffb2e03c90 [ 0.172549] R10: ffffffffb2e03c90 R11: 0000000000000000 R12: 0000000000000000 [ 0.173544] R13: ffffffffb2e03c90 R14: ffffffffb2e03c90 R15: 0000000000000001 [ 0.174542] FS: 0000000000000000(0000) GS:ffff9d2808114000(0000) knlGS:0000000000000000 [ 0.175684] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.176486] CR2: 000000000000001c CR3: 000000007264c001 CR4: 00000000000200b0 [ 0.177483] Call Trace: [ 0.177828] <TASK> [ 0.178123] mas_alloc_nodes (lib/maple_tree.c:176 (discriminator 2) lib/maple_tree.c:1255 (discriminator 2)) [ 0.178692] mas_store_gfp (lib/maple_tree.c:5468) [ 0.179223] execmem_cache_add_locked (mm/execmem.c:207) [ 0.179870] execmem_alloc (mm/execmem.c:213 mm/execmem.c:313 mm/execmem.c:335 mm/execmem.c:475) [ 0.180397] ? ftrace_caller (arch/x86/kernel/ftrace_64.S:169) [ 0.180922] ? __pfx_ftrace_caller (arch/x86/kernel/ftrace_64.S:158) [ 0.181517] execmem_alloc_rw (mm/execmem.c:487) [ 0.182052] arch_ftrace_update_trampoline (arch/x86/kernel/ftrace.c:266 arch/x86/kernel/ftrace.c:344 arch/x86/kernel/ftrace.c:474) [ 0.182778] ? ftrace_caller_op_ptr (arch/x86/kernel/ftrace_64.S:182) [ 0.183388] ftrace_update_trampoline (kernel/trace/ftrace.c:7947) [ 0.184024] __register_ftrace_function (kernel/trace/ftrace.c:368) [ 0.184682] ftrace_startup (kernel/trace/ftrace.c:3048) [ 0.185205] ? __pfx_function_trace_call (kernel/trace/trace_functions.c:210) [ 0.185877] register_ftrace_function_nolock (kernel/trace/ftrace.c:8717) [ 0.186595] register_ftrace_function (kernel/trace/ftrace.c:8745) [ 0.187254] ? __pfx_function_trace_call (kernel/trace/trace_functions.c:210) [ 0.187924] function_trace_init (kernel/trace/trace_functions.c:170) [ 0.188499] tracing_set_tracer (kernel/trace/trace.c:5916 kernel/trace/trace.c:6349) [ 0.189088] register_tracer (kernel/trace/trace.c:2391) [ 0.189642] early_trace_init (kernel/trace/trace.c:11075 kernel/trace/trace.c:11149) [ 0.190204] start_kernel (init/main.c:970) [ 0.190732] x86_64_start_reservations (arch/x86/kernel/head64.c:307) [ 0.191381] x86_64_start_kernel (??:?) [ 0.191955] common_startup_64 (arch/x86/kernel/head_64.S:419) [ 0.192534] </TASK> [ 0.192839] Modules linked in: [ 0.193267] CR2: 000000000000001c [ 0.193730] ---[ end trace 0000000000000000 ]--- The crash happens because on x86 ftrace allocations from execmem require maple tree to be initialized. Move maple tree initialization that depends only on slab availability earlier in boot so that it will happen right after mm_core_init(). Link: https://lkml.kernel.org/r/20250824130759.1732736-1-rppt@kernel.org Fixes: 5d79c2b ("x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations") Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Closes: https://lore.kernel.org/all/20250820184743.0302a8b5@gandalf.local.home/ Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
…on memory When I did memory failure tests, below panic occurs: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page)) kernel BUG at include/linux/page-flags.h:616! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 torvalds#40 RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Call Trace: <TASK> unpoison_memory+0x2f3/0x590 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xd5/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08f0314887 RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887 RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001 RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00 </TASK> Modules linked in: hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The root cause is that unpoison_memory() tries to check the PG_HWPoison flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is triggered. This can be reproduced by below steps: 1.Offline memory block: echo offline > /sys/devices/system/memory/memory12/state 2.Get offlined memory pfn: page-types -b n -rlN 3.Write pfn to unpoison-pfn echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn This scenario can be identified by pfn_to_online_page() returning NULL. And ZONE_DEVICE pages are never expected, so we can simply fail if pfn_to_online_page() == NULL to fix the bug. Link: https://lkml.kernel.org/r/20250828024618.1744895-1-linmiaohe@huawei.com Fixes: f1dd2cd ("mm, memory_hotplug: do not associate hotadded memory to zones until online") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Problem description
===================
Lockdep reports a possible circular locking dependency (AB/BA) between
&pl->state_mutex and &phy->lock, as follows.
phylink_resolve() // acquires &pl->state_mutex
-> phylink_major_config()
-> phy_config_inband() // acquires &pl->phydev->lock
whereas all the other call sites where &pl->state_mutex and
&pl->phydev->lock have the locking scheme reversed. Everywhere else,
&pl->phydev->lock is acquired at the top level, and &pl->state_mutex at
the lower level. A clear example is phylink_bringup_phy().
The outlier is the newly introduced phy_config_inband() and the existing
lock order is the correct one. To understand why it cannot be the other
way around, it is sufficient to consider phylink_phy_change(), phylink's
callback from the PHY device's phy->phy_link_change() virtual method,
invoked by the PHY state machine.
phy_link_up() and phy_link_down(), the (indirect) callers of
phylink_phy_change(), are called with &phydev->lock acquired.
Then phylink_phy_change() acquires its own &pl->state_mutex, to
serialize changes made to its pl->phy_state and pl->link_config.
So all other instances of &pl->state_mutex and &phydev->lock must be
consistent with this order.
Problem impact
==============
I think the kernel runs a serious deadlock risk if an existing
phylink_resolve() thread, which results in a phy_config_inband() call,
is concurrent with a phy_link_up() or phy_link_down() call, which will
deadlock on &pl->state_mutex in phylink_phy_change(). Practically
speaking, the impact may be limited by the slow speed of the medium
auto-negotiation protocol, which makes it unlikely for the current state
to still be unresolved when a new one is detected, but I think the
problem is there. Nonetheless, the problem was discovered using lockdep.
Proposed solution
=================
Practically speaking, the phy_config_inband() requirement of having
phydev->lock acquired must transfer to the caller (phylink is the only
caller). There, it must bubble up until immediately before
&pl->state_mutex is acquired, for the cases where that takes place.
Solution details, considerations, notes
=======================================
This is the phy_config_inband() call graph:
sfp_upstream_ops :: connect_phy()
|
v
phylink_sfp_connect_phy()
|
v
phylink_sfp_config_phy()
|
| sfp_upstream_ops :: module_insert()
| |
| v
| phylink_sfp_module_insert()
| |
| | sfp_upstream_ops :: module_start()
| | |
| | v
| | phylink_sfp_module_start()
| | |
| v v
| phylink_sfp_config_optical()
phylink_start() | |
| phylink_resume() v v
| | phylink_sfp_set_config()
| | |
v v v
phylink_mac_initial_config()
| phylink_resolve()
| | phylink_ethtool_ksettings_set()
v v v
phylink_major_config()
|
v
phy_config_inband()
phylink_major_config() caller #1, phylink_mac_initial_config(), does not
acquire &pl->state_mutex nor do its callers. It must acquire
&pl->phydev->lock prior to calling phylink_major_config().
phylink_major_config() caller #2, phylink_resolve() acquires
&pl->state_mutex, thus also needs to acquire &pl->phydev->lock.
phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is
completely uninteresting, because it only calls phylink_major_config()
if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()).
We need to change nothing there.
Other solutions
===============
The lock inversion between &pl->state_mutex and &pl->phydev->lock has
occurred at least once before, as seen in commit c718af2 ("net:
phylink: fix ethtool -A with attached PHYs"). The solution there was to
simply not call phy_set_asym_pause() under the &pl->state_mutex. That
cannot be extended to our case though, where the phy_config_inband()
call is much deeper inside the &pl->state_mutex section.
Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration later than the first, the error path wants to free the IRQs requested so far. However, it uses the wrong dev_id argument for free_irq(), so it does not free the IRQs correctly and instead triggers the warning: Trying to free already-free IRQ 173 WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0 Modules linked in: i40e(+) [...] CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: [...] RIP: 0010:__free_irq+0x192/0x2c0 [...] Call Trace: <TASK> free_irq+0x32/0x70 i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e] i40e_vsi_request_irq+0x79/0x80 [i40e] i40e_vsi_open+0x21f/0x2f0 [i40e] i40e_open+0x63/0x130 [i40e] __dev_open+0xfc/0x210 __dev_change_flags+0x1fc/0x240 netif_change_flags+0x27/0x70 do_setlink.isra.0+0x341/0xc70 rtnl_newlink+0x468/0x860 rtnetlink_rcv_msg+0x375/0x450 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x288/0x3c0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x3a2/0x3d0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x82/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]--- Use the same dev_id for free_irq() as for request_irq(). I tested this with inserting code to fail intentionally. Fixes: 493fb30 ("i40e: Move q_vectors from pointer to array to array of pointers") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Hangbin Liu says: ==================== hsr: fix lock warnings hsr_for_each_port is called in many places without holding the RCU read lock, this may trigger warnings on debug kernels like: [ 40.457015] [ T201] WARNING: suspicious RCU usage [ 40.457020] [ T201] 6.17.0-rc2-virtme #1 Not tainted [ 40.457025] [ T201] ----------------------------- [ 40.457029] [ T201] net/hsr/hsr_main.c:137 RCU-list traversed in non-reader section!! [ 40.457036] [ T201] other info that might help us debug this: [ 40.457040] [ T201] rcu_scheduler_active = 2, debug_locks = 1 [ 40.457045] [ T201] 2 locks held by ip/201: [ 40.457050] [ T201] #0: ffffffff93040a40 (&ops->srcu){.+.+}-{0:0}, at: rtnl_link_ops_get+0xf2/0x280 [ 40.457080] [ T201] #1: ffffffff92e7f968 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x5e1/0xb20 [ 40.457102] [ T201] stack backtrace: [ 40.457108] [ T201] CPU: 2 UID: 0 PID: 201 Comm: ip Not tainted 6.17.0-rc2-virtme #1 PREEMPT(full) [ 40.457114] [ T201] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 40.457117] [ T201] Call Trace: [ 40.457120] [ T201] <TASK> [ 40.457126] [ T201] dump_stack_lvl+0x6f/0xb0 [ 40.457136] [ T201] lockdep_rcu_suspicious.cold+0x4f/0xb1 [ 40.457148] [ T201] hsr_port_get_hsr+0xfe/0x140 [ 40.457158] [ T201] hsr_add_port+0x192/0x940 [ 40.457167] [ T201] ? __pfx_hsr_add_port+0x10/0x10 [ 40.457176] [ T201] ? lockdep_init_map_type+0x5c/0x270 [ 40.457189] [ T201] hsr_dev_finalize+0x4bc/0xbf0 [ 40.457204] [ T201] hsr_newlink+0x3c3/0x8f0 [ 40.457212] [ T201] ? __pfx_hsr_newlink+0x10/0x10 [ 40.457222] [ T201] ? rtnl_create_link+0x173/0xe40 [ 40.457233] [ T201] rtnl_newlink_create+0x2cf/0x750 [ 40.457243] [ T201] ? __pfx_rtnl_newlink_create+0x10/0x10 [ 40.457247] [ T201] ? __dev_get_by_name+0x12/0x50 [ 40.457252] [ T201] ? rtnl_dev_get+0xac/0x140 [ 40.457259] [ T201] ? __pfx_rtnl_dev_get+0x10/0x10 [ 40.457285] [ T201] __rtnl_newlink+0x22c/0xa50 [ 40.457305] [ T201] rtnl_newlink+0x637/0xb20 Adding rcu_read_lock() for all hsr_for_each_port() looks confusing. Introduce a new helper, hsr_for_each_port_rtnl(), that assumes the RTNL lock is held. This allows callers in suitable contexts to iterate ports safely without explicit RCU locking. Other code paths that rely on RCU protection continue to use hsr_for_each_port() with rcu_read_lock(). ==================== Link: https://patch.msgid.link/20250905091533.377443-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Avoid below overlapping mappings by using a contiguous non-cacheable buffer. [ 4.077708] DMA-API: stm32_fmc2_nfc 48810000.nand-controller: cacheline tracking EEXIST, overlapping mappings aren't supported [ 4.089103] WARNING: CPU: 1 PID: 44 at kernel/dma/debug.c:568 add_dma_entry+0x23c/0x300 [ 4.097071] Modules linked in: [ 4.100101] CPU: 1 PID: 44 Comm: kworker/u4:2 Not tainted 6.1.82 #1 [ 4.106346] Hardware name: STMicroelectronics STM32MP257F VALID1 SNOR / MB1704 (LPDDR4 Power discrete) + MB1703 + MB1708 (SNOR MB1730) (DT) [ 4.118824] Workqueue: events_unbound deferred_probe_work_func [ 4.124674] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.131624] pc : add_dma_entry+0x23c/0x300 [ 4.135658] lr : add_dma_entry+0x23c/0x300 [ 4.139792] sp : ffff800009dbb490 [ 4.143016] x29: ffff800009dbb4a0 x28: 0000000004008022 x27: ffff8000098a6000 [ 4.150174] x26: 0000000000000000 x25: ffff8000099e7000 x24: ffff8000099e7de8 [ 4.157231] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff8000098a6a20 [ 4.164388] x20: ffff000080964180 x19: ffff800009819ba0 x18: 0000000000000006 [ 4.171545] x17: 6361727420656e69 x16: 6c6568636163203a x15: 72656c6c6f72746e [ 4.178602] x14: 6f632d646e616e2e x13: ffff800009832f58 x12: 00000000000004ec [ 4.185759] x11: 00000000000001a4 x10: ffff80000988af58 x9 : ffff800009832f58 [ 4.192916] x8 : 00000000ffffefff x7 : ffff80000988af58 x6 : 80000000fffff000 [ 4.199972] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 4.207128] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000812d2c40 [ 4.214185] Call trace: [ 4.216605] add_dma_entry+0x23c/0x300 [ 4.220338] debug_dma_map_sg+0x198/0x350 [ 4.224373] __dma_map_sg_attrs+0xa0/0x110 [ 4.228411] dma_map_sg_attrs+0x10/0x2c [ 4.232247] stm32_fmc2_nfc_xfer.isra.0+0x1c8/0x3fc [ 4.237088] stm32_fmc2_nfc_seq_read_page+0xc8/0x174 [ 4.242127] nand_read_oob+0x1d4/0x8e0 [ 4.245861] mtd_read_oob_std+0x58/0x84 [ 4.249596] mtd_read_oob+0x90/0x150 [ 4.253231] mtd_read+0x68/0xac Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Cc: stable@vger.kernel.org Fixes: 2cd457f ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") simplified code by using the for_each_of_range() iterator, but it broke PCI enumeration on Turris Omnia (and probably other mvebu targets). Issue #1: To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(), which resolves to of_bus_pci_get_flags(), which already returns an IORESOURCE bit field, and NOT the original flags from the "ranges" resource. Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore the intended behavior. Issue #2: The driver needs target and attributes, which are encoded in the raw address values of the "/soc/pcie/ranges" resource. According to of_pci_range_parser_one(), the raw values are stored in range.bus_addr and range.parent_bus_addr, respectively. range.cpu_addr is a translated version of range.parent_bus_addr, and not relevant here. Use the correct range structure member, to extract target and attributes. This restores the intended behavior. Fixes: 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") Reported-by: Jan Palus <jpalus@fastmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479 Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Tony Dinh <mibodhi@gmail.com> Tested-by: Jan Palus <jpalus@fastmail.com> Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
The function ceph_process_folio_batch() sets folio_batch entries to NULL, which is an illegal state. Before folio_batch_release() crashes due to this API violation, the function ceph_shift_unused_folios_left() is supposed to remove those NULLs from the array. However, since commit ce80b76 ("ceph: introduce ceph_process_folio_batch() method"), this shifting doesn't happen anymore because the "for" loop got moved to ceph_process_folio_batch(), and now the `i` variable that remains in ceph_writepages_start() doesn't get incremented anymore, making the shifting effectively unreachable much of the time. Later, commit 1551ec6 ("ceph: introduce ceph_submit_write() method") added more preconditions for doing the shift, replacing the `i` check (with something that is still just as broken): - if ceph_process_folio_batch() fails, shifting never happens - if ceph_move_dirty_page_in_page_array() was never called (because ceph_process_folio_batch() has returned early for some of various reasons), shifting never happens - if `processed_in_fbatch` is zero (because ceph_process_folio_batch() has returned early for some of the reasons mentioned above or because ceph_move_dirty_page_in_page_array() has failed), shifting never happens Since those two commits, any problem in ceph_process_folio_batch() could crash the kernel, e.g. this way: BUG: kernel NULL pointer dereference, address: 0000000000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 172 UID: 0 PID: 2342707 Comm: kworker/u778:8 Not tainted 6.15.10-cm4all1-es torvalds#714 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.10 12/08/2023 Workqueue: writeback wb_workfn (flush-ceph-1) RIP: 0010:folios_put_refs+0x85/0x140 Code: 83 c5 01 39 e8 7e 76 48 63 c5 49 8b 5c c4 08 b8 01 00 00 00 4d 85 ed 74 05 41 8b 44 ad 00 48 8b 15 b0 > RSP: 0018:ffffb880af8db778 EFLAGS: 00010207 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000003 RDX: ffffe377cc3b0000 RSI: 0000000000000000 RDI: ffffb880af8db8c0 RBP: 0000000000000000 R08: 000000000000007d R09: 000000000102b86f R10: 0000000000000001 R11: 00000000000000ac R12: ffffb880af8db8c0 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9bd262c97000 FS: 0000000000000000(0000) GS:ffff9c8efc303000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000034 CR3: 0000000160958004 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ceph_writepages_start+0xeb9/0x1410 The crash can be reproduced easily by changing the ceph_check_page_before_write() return value to `-E2BIG`. (Interestingly, the crash happens only if `huge_zero_folio` has already been allocated; without `huge_zero_folio`, is_huge_zero_folio(NULL) returns true and folios_put_refs() skips NULL entries instead of dereferencing them. That makes reproducing the bug somewhat unreliable. See https://lore.kernel.org/20250826231626.218675-1-max.kellermann@ionos.com for a discussion of this detail.) My suggestion is to move the ceph_shift_unused_folios_left() to right after ceph_process_folio_batch() to ensure it always gets called to fix up the illegal folio_batch state. Cc: stable@vger.kernel.org Fixes: ce80b76 ("ceph: introduce ceph_process_folio_batch() method") Link: https://lore.kernel.org/ceph-devel/aK4v548CId5GIKG1@swift.blarg.de/ Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
…rnal() A crash was observed with the following output: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 2899 Comm: syz.2.399 Not tainted 6.17.0-rc5+ #5 PREEMPT(none) RIP: 0010:trace_kprobe_create_internal+0x3fc/0x1440 kernel/trace/trace_kprobe.c:911 Call Trace: <TASK> trace_kprobe_create_cb+0xa2/0xf0 kernel/trace/trace_kprobe.c:1089 trace_probe_create+0xf1/0x110 kernel/trace/trace_probe.c:2246 dyn_event_create+0x45/0x70 kernel/trace/trace_dynevent.c:128 create_or_delete_trace_kprobe+0x5e/0xc0 kernel/trace/trace_kprobe.c:1107 trace_parse_run_command+0x1a5/0x330 kernel/trace/trace.c:10785 vfs_write+0x2b6/0xd00 fs/read_write.c:684 ksys_write+0x129/0x240 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x5d/0x2d0 arch/x86/entry/syscall_64.c:94 </TASK> Function kmemdup() may return NULL in trace_kprobe_create_internal(), add check for it's return value. Link: https://lore.kernel.org/all/20250916075816.3181175-1-wangliang74@huawei.com/ Fixes: 33b4e38 ("tracing: kprobe-event: Allocate string buffers from heap") Signed-off-by: Wang Liang <wangliang74@huawei.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
syzkaller has caught us red-handed once more, this time nesting regular
spinlocks behind raw spinlocks:
=============================
[ BUG: Invalid wait context ]
6.16.0-rc3-syzkaller-g7b8346bd9fce #0 Not tainted
-----------------------------
syz.0.29/3743 is trying to lock:
a3ff80008e2e9e18 (&xa->xa_lock#20){....}-{3:3}, at: vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137
other info that might help us debug this:
context-{5:5}
3 locks held by syz.0.29/3743:
#0: a3ff80008e2e90a8 (&kvm->slots_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x50/0x624 arch/arm64/kvm/vgic/vgic-init.c:499
#1: a3ff80008e2e9fa0 (&kvm->arch.config_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x5c/0x624 arch/arm64/kvm/vgic/vgic-init.c:500
#2: 58f0000021be1428 (&vgic_cpu->ap_list_lock){....}-{2:2}, at: vgic_flush_pending_lpis+0x3c/0x31c arch/arm64/kvm/vgic/vgic.c:150
stack backtrace:
CPU: 0 UID: 0 PID: 3743 Comm: syz.0.29 Not tainted 6.16.0-rc3-syzkaller-g7b8346bd9fce #0 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
dump_stack+0x1c/0x28 lib/dump_stack.c:129
print_lock_invalid_wait_context kernel/locking/lockdep.c:4833 [inline]
check_wait_context kernel/locking/lockdep.c:4905 [inline]
__lock_acquire+0x978/0x299c kernel/locking/lockdep.c:5190
lock_acquire+0x14c/0x2e0 kernel/locking/lockdep.c:5871
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x5c/0x7c kernel/locking/spinlock.c:162
vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137
vgic_flush_pending_lpis+0x24c/0x31c arch/arm64/kvm/vgic/vgic.c:158
__kvm_vgic_vcpu_destroy+0x44/0x500 arch/arm64/kvm/vgic/vgic-init.c:455
kvm_vgic_destroy+0x100/0x624 arch/arm64/kvm/vgic/vgic-init.c:505
kvm_arch_destroy_vm+0x80/0x138 arch/arm64/kvm/arm.c:244
kvm_destroy_vm virt/kvm/kvm_main.c:1308 [inline]
kvm_put_kvm+0x800/0xff8 virt/kvm/kvm_main.c:1344
kvm_vm_release+0x58/0x78 virt/kvm/kvm_main.c:1367
__fput+0x4ac/0x980 fs/file_table.c:465
____fput+0x20/0x58 fs/file_table.c:493
task_work_run+0x1bc/0x254 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
do_notify_resume+0x1b4/0x270 arch/arm64/kernel/entry-common.c:151
exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline]
exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline]
el0_svc+0xb4/0x160 arch/arm64/kernel/entry-common.c:768
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
This is of course no good, but is at odds with how LPI refcounts are
managed. Solve the locking mess by deferring the release of unreferenced
LPIs after the ap_list_lock is released. Mark these to-be-released LPIs
specially to avoid racing with vgic_put_irq() and causing a double-free.
Since references can only be taken on LPIs with a nonzero refcount,
extending the lifetime of freed LPIs is still safe.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reported-by: syzbot+cef594105ac7e60c6d93@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/kvmarm/68acd0d9.a00a0220.33401d.048b.GAE@google.com/
Link: https://lore.kernel.org/r/20250905100531.282980-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
…ostcopy When you run a KVM guest with vhost-net and migrate that guest to another host, and you immediately enable postcopy after starting the migration, there is a big chance that the network connection of the guest won't work anymore on the destination side after the migration. With a debug kernel v6.16.0, there is also a call trace that looks like this: FAULT_FLAG_ALLOW_RETRY missing 881 CPU: 6 UID: 0 PID: 549 Comm: kworker/6:2 Kdump: loaded Not tainted 6.16.0 torvalds#56 NONE Hardware name: IBM 3931 LA1 400 (LPAR) Workqueue: events irqfd_inject [kvm] Call Trace: [<00003173cbecc634>] dump_stack_lvl+0x104/0x168 [<00003173cca69588>] handle_userfault+0xde8/0x1310 [<00003173cc756f0c>] handle_pte_fault+0x4fc/0x760 [<00003173cc759212>] __handle_mm_fault+0x452/0xa00 [<00003173cc7599ba>] handle_mm_fault+0x1fa/0x6a0 [<00003173cc73409a>] __get_user_pages+0x4aa/0xba0 [<00003173cc7349e8>] get_user_pages_remote+0x258/0x770 [<000031734be6f052>] get_map_page+0xe2/0x190 [kvm] [<000031734be6f910>] adapter_indicators_set+0x50/0x4a0 [kvm] [<000031734be7f674>] set_adapter_int+0xc4/0x170 [kvm] [<000031734be2f268>] kvm_set_irq+0x228/0x3f0 [kvm] [<000031734be27000>] irqfd_inject+0xd0/0x150 [kvm] [<00003173cc00c9ec>] process_one_work+0x87c/0x1490 [<00003173cc00dda6>] worker_thread+0x7a6/0x1010 [<00003173cc02dc36>] kthread+0x3b6/0x710 [<00003173cbed2f0c>] __ret_from_fork+0xdc/0x7f0 [<00003173cdd737ca>] ret_from_fork+0xa/0x30 3 locks held by kworker/6:2/549: #0: 00000000800bc958 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7ee/0x1490 #1: 000030f3d527fbd0 ((work_completion)(&irqfd->inject)){+.+.}-{0:0}, at: process_one_work+0x81c/0x1490 #2: 00000000f99862b0 (&mm->mmap_lock){++++}-{3:3}, at: get_map_page+0xa8/0x190 [kvm] The "FAULT_FLAG_ALLOW_RETRY missing" indicates that handle_userfaultfd() saw a page fault request without ALLOW_RETRY flag set, hence userfaultfd cannot remotely resolve it (because the caller was asking for an immediate resolution, aka, FAULT_FLAG_NOWAIT, while remote faults can take time). With that, get_map_page() failed and the irq was lost. We should not be strictly in an atomic environment here and the worker should be sleepable (the call is done during an ioctl from userspace), so we can allow adapter_indicators_set() to just sleep waiting for the remote fault instead. Link: https://issues.redhat.com/browse/RHEL-42486 Signed-off-by: Peter Xu <peterx@redhat.com> [thuth: Assembled patch description and fixed some cosmetical issues] Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Fixes: f654706 ("KVM: s390/interrupt: do not pin adapter interrupt pages") [frankja: Added fixes tag] Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
…PAIR
A NULL pointer dereference can occur in tcp_ao_finish_connect() during a
connect() system call on a socket with a TCP-AO key added and TCP_REPAIR
enabled.
The function is called with skb being NULL and attempts to dereference it
on tcp_hdr(skb)->seq without a prior skb validation.
Fix this by checking if skb is NULL before dereferencing it.
The commentary is taken from bpf_skops_established(), which is also called
in the same flow. Unlike the function being patched,
bpf_skops_established() validates the skb before dereferencing it.
int main(void){
struct sockaddr_in sockaddr;
struct tcp_ao_add tcp_ao;
int sk;
int one = 1;
memset(&sockaddr,'\0',sizeof(sockaddr));
memset(&tcp_ao,'\0',sizeof(tcp_ao));
sk = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
sockaddr.sin_family = AF_INET;
memcpy(tcp_ao.alg_name,"cmac(aes128)",12);
memcpy(tcp_ao.key,"ABCDEFGHABCDEFGH",16);
tcp_ao.keylen = 16;
memcpy(&tcp_ao.addr,&sockaddr,sizeof(sockaddr));
setsockopt(sk, IPPROTO_TCP, TCP_AO_ADD_KEY, &tcp_ao,
sizeof(tcp_ao));
setsockopt(sk, IPPROTO_TCP, TCP_REPAIR, &one, sizeof(one));
sockaddr.sin_family = AF_INET;
sockaddr.sin_port = htobe16(123);
inet_aton("127.0.0.1", &sockaddr.sin_addr);
connect(sk,(struct sockaddr *)&sockaddr,sizeof(sockaddr));
return 0;
}
$ gcc tcp-ao-nullptr.c -o tcp-ao-nullptr -Wall
$ unshare -Urn
BUG: kernel NULL pointer dereference, address: 00000000000000b6
PGD 1f648d067 P4D 1f648d067 PUD 1982e8067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:tcp_ao_finish_connect (net/ipv4/tcp_ao.c:1182)
Fixes: 7c2ffaf ("net/tcp: Calculate TCP-AO traffic keys")
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250911230743.2551-3-anderson@allelesecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
When igc_led_setup() fails, igc_probe() fails and triggers kernel panic in free_netdev() since unregister_netdev() is not called. [1] This behavior can be tested using fault-injection framework, especially the failslab feature. [2] Since LED support is not mandatory, treat LED setup failures as non-fatal and continue probe with a warning message, consequently avoiding the kernel panic. [1] kernel BUG at net/core/dev.c:12047! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 torvalds#64 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:free_netdev+0x278/0x2b0 [...] Call Trace: <TASK> igc_probe+0x370/0x910 local_pci_probe+0x3a/0x80 pci_device_probe+0xd1/0x200 [...] [2] #!/bin/bash -ex FAILSLAB_PATH=/sys/kernel/debug/failslab/ DEVICE=0000:00:05.0 START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \ | awk '{printf("0x%s", $1)}') END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100))) echo $START_ADDR > $FAILSLAB_PATH/require-start echo $END_ADDR > $FAILSLAB_PATH/require-end echo 1 > $FAILSLAB_PATH/times echo 100 > $FAILSLAB_PATH/probability echo N > $FAILSLAB_PATH/ignore-gfp-wait echo $DEVICE > /sys/bus/pci/drivers/igc/bind Fixes: ea57870 ("igc: Add support for LEDs on i225/i226") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Check in snd_intel_dsp_check_soundwire() that the pointer returned by ACPI_HANDLE() is not NULL, before passing it on to other functions. The original code assumed a non-NULL return, but if it was unexpectedly NULL it would end up passed to acpi_walk_namespace() as the start point, and would result in [ 3.219028] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 3.219029] #PF: supervisor read access in kernel mode [ 3.219030] #PF: error_code(0x0000) - not-present page [ 3.219031] PGD 0 P4D 0 [ 3.219032] Oops: Oops: 0000 [#1] SMP NOPTI [ 3.219035] CPU: 2 UID: 0 PID: 476 Comm: (udev-worker) Tainted: G S AW E 6.17.0-rc5-test #1 PREEMPT(voluntary) [ 3.219038] Tainted: [S]=CPU_OUT_OF_SPEC, [A]=OVERRIDDEN_ACPI_TABLE, [W]=WARN, [E]=UNSIGNED_MODULE [ 3.219040] RIP: 0010:acpi_ns_walk_namespace+0xb5/0x480 This problem was triggered by a bugged DSDT that the kernel couldn't parse. But it shouldn't be possible to SEGFAULT the kernel just because of some bugs in ACPI. Fixes: 0650857 ("ALSA: hda: add autodetection for SoundWire") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
…own_locked() When 9770b42 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown") moved the error messages dumping so that they don't need to be issued by the callers, it missed the case where __sev_firmware_shutdown() calls __sev_platform_shutdown_locked() with a NULL argument which leads to a NULL ptr deref on the shutdown path, during suspend to disk: #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022 RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp] That rIP is: 00000000000006fd <__sev_platform_shutdown_locked.cold>: 6fd: 8b 13 mov (%rbx),%edx 6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi 703: 89 c1 mov %eax,%ecx Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e RSP: 0018:ffffc90005467d00 EFLAGS: 00010282 RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ and %rbx is nice and clean. Call Trace: <TASK> __sev_firmware_shutdown.isra.0 sev_dev_destroy psp_dev_destroy sp_destroy pci_device_shutdown device_shutdown kernel_power_off hibernate.cold state_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Pass in a pointer to the function-local error var in the caller. With that addressed, suspending the ccp shows the error properly at least: ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110 SEV-SNP: Leaking PFN range 0x146800-0x146a00 SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00] ... ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0 ACPI: PM: Preparing to enter system sleep state S5 kvm: exiting hardware virtualization reboot: Power down Btw, this driver is crying to be cleaned up to pass in a proper I/O struct which can be used to store information between the different functions, otherwise stuff like that will happen in the future again. Fixes: 9770b42 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown") Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Reviewed-by: Ashish Kalra <ashish.kalra@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
The kernel forbids the creation of non-FDB nexthop groups with FDB nexthops: # ip nexthop add id 1 via 192.0.2.1 fdb # ip nexthop add id 2 group 1 Error: Non FDB nexthop group cannot have fdb nexthops. And vice versa: # ip nexthop add id 3 via 192.0.2.2 dev dummy1 # ip nexthop add id 4 group 3 fdb Error: FDB nexthop group can only have fdb nexthops. However, as long as no routes are pointing to a non-FDB nexthop group, the kernel allows changing the type of a nexthop from FDB to non-FDB and vice versa: # ip nexthop add id 5 via 192.0.2.2 dev dummy1 # ip nexthop add id 6 group 5 # ip nexthop replace id 5 via 192.0.2.2 fdb # echo $? 0 This configuration is invalid and can result in a NPD [1] since FDB nexthops are not associated with a nexthop device: # ip route add 198.51.100.1/32 nhid 6 # ping 198.51.100.1 Fix by preventing nexthop FDB status change while the nexthop is in a group: # ip nexthop add id 7 via 192.0.2.2 dev dummy1 # ip nexthop add id 8 group 7 # ip nexthop replace id 7 via 192.0.2.2 fdb Error: Cannot change nexthop FDB status while in a group. [1] BUG: kernel NULL pointer dereference, address: 00000000000003c0 [...] Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:fib_lookup_good_nhc+0x1e/0x80 [...] Call Trace: <TASK> fib_table_lookup+0x541/0x650 ip_route_output_key_hash_rcu+0x2ea/0x970 ip_route_output_key_hash+0x55/0x80 __ip4_datagram_connect+0x250/0x330 udp_connect+0x2b/0x60 __sys_connect+0x9c/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0xa4/0x2a0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 38428d6 ("nexthop: support for fdb ecmp nexthops") Reported-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68c9a4d2.050a0220.3c6139.0e63.GAE@google.com/ Tested-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250921150824.149157-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Ido Schimmel says: ==================== nexthop: Various fixes Patch #1 fixes a NPD that was recently reported by syzbot. Patch #2 fixes an issue in the existing FIB nexthop selftest. Patch #3 extends the selftest with test cases for the bug that was fixed in the first patch. ==================== Link: https://patch.msgid.link/20250921150824.149157-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Add 0x29 as the accelerometer address for the Dell Latitude E6530 to
lis3lv02d_devices[].
The address was verified as below:
$ cd /sys/bus/pci/drivers/i801_smbus/0000:00:1f.3
$ ls -d i2c-*
i2c-20
$ sudo modprobe i2c-dev
$ sudo i2cdetect 20
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-20.
I will probe address range 0x08-0x77.
Continue? [Y/n] Y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- UU -- 2b -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- 61 -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
$ cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-linux-cachyos-bore root=UUID=<redacted> rw loglevel=3 quiet dell_lis3lv02d.probe_i2c_addr=1
$ sudo dmesg
[ 0.000000] Linux version 6.16.6-2-cachyos-bore (linux-cachyos-bore@cachyos) (gcc (GCC) 15.2.1 20250813, GNU ld (GNU Binutils) 2.45.0) #1 SMP PREEMPT_DYNAMIC Thu, 11 Sep 2025 16:01:12 +0000
[…]
[ 0.000000] DMI: Dell Inc. Latitude E6530/07Y85M, BIOS A22 11/30/2018
[…]
[ 5.166442] i2c i2c-20: Probing for lis3lv02d on address 0x29
[ 5.167854] i2c i2c-20: Detected lis3lv02d on address 0x29, please report this upstream to platform-driver-x86@vger.kernel.org so that a quirk can be added
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250917-dell-lis3lv02d-latitude-e6530-v1-1-8a6dec4e51e9@mainlining.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
Running sha224_kunit on a KMSAN-enabled kernel results in a crash in
kmsan_internal_set_shadow_origin():
BUG: unable to handle page fault for address: ffffbc3840291000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1810067 P4D 1810067 PUD 192d067 PMD 3c17067 PTE 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 81 Comm: kunit_try_catch Tainted: G N 6.17.0-rc3 torvalds#10 PREEMPT(voluntary)
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmsan_internal_set_shadow_origin+0x91/0x100
[...]
Call Trace:
<TASK>
__msan_memset+0xee/0x1a0
sha224_final+0x9e/0x350
test_hash_buffer_overruns+0x46f/0x5f0
? kmsan_get_shadow_origin_ptr+0x46/0xa0
? __pfx_test_hash_buffer_overruns+0x10/0x10
kunit_try_run_case+0x198/0xa00
This occurs when memset() is called on a buffer that is not 4-byte aligned
and extends to the end of a guard page, i.e. the next page is unmapped.
The bug is that the loop at the end of kmsan_internal_set_shadow_origin()
accesses the wrong shadow memory bytes when the address is not 4-byte
aligned. Since each 4 bytes are associated with an origin, it rounds the
address and size so that it can access all the origins that contain the
buffer. However, when it checks the corresponding shadow bytes for a
particular origin, it incorrectly uses the original unrounded shadow
address. This results in reads from shadow memory beyond the end of the
buffer's shadow memory, which crashes when that memory is not mapped.
To fix this, correctly align the shadow address before accessing the 4
shadow bytes corresponding to each origin.
Link: https://lkml.kernel.org/r/20250911195858.394235-1-ebiggers@kernel.org
Fixes: 2ef3cec ("kmsan: do not wipe out origin when doing partial unpoisoning")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
When the PAGEMAP_SCAN ioctl is invoked with vec_len = 0 reaches pagemap_scan_backout_range(), kernel panics with null-ptr-deref: [ 44.936808] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.937797] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 44.938391] CPU: 1 UID: 0 PID: 2480 Comm: reproducer Not tainted 6.17.0-rc6 torvalds#22 PREEMPT(none) [ 44.939062] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.939935] RIP: 0010:pagemap_scan_thp_entry.isra.0+0x741/0xa80 <snip registers, unreliable trace> [ 44.946828] Call Trace: [ 44.947030] <TASK> [ 44.949219] pagemap_scan_pmd_entry+0xec/0xfa0 [ 44.952593] walk_pmd_range.isra.0+0x302/0x910 [ 44.954069] walk_pud_range.isra.0+0x419/0x790 [ 44.954427] walk_p4d_range+0x41e/0x620 [ 44.954743] walk_pgd_range+0x31e/0x630 [ 44.955057] __walk_page_range+0x160/0x670 [ 44.956883] walk_page_range_mm+0x408/0x980 [ 44.958677] walk_page_range+0x66/0x90 [ 44.958984] do_pagemap_scan+0x28d/0x9c0 [ 44.961833] do_pagemap_cmd+0x59/0x80 [ 44.962484] __x64_sys_ioctl+0x18d/0x210 [ 44.962804] do_syscall_64+0x5b/0x290 [ 44.963111] entry_SYSCALL_64_after_hwframe+0x76/0x7e vec_len = 0 in pagemap_scan_init_bounce_buffer() means no buffers are allocated and p->vec_buf remains set to NULL. This breaks an assumption made later in pagemap_scan_backout_range(), that page_region is always allocated for p->vec_buf_index. Fix it by explicitly checking p->vec_buf for NULL before dereferencing. Other sites that might run into same deref-issue are already (directly or transitively) protected by checking p->vec_buf. Note: From PAGEMAP_SCAN man page, it seems vec_len = 0 is valid when no output is requested and it's only the side effects caller is interested in, hence it passes check in pagemap_scan_get_args(). This issue was found by syzkaller. Link: https://lkml.kernel.org/r/20250922082206.6889-1-acsjakub@amazon.de Fixes: 52526ca ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs") Signed-off-by: Jakub Acs <acsjakub@amazon.de> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jinjiang Tu <tujinjiang@huawei.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Penglei Jiang <superman.xpt@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
changchingyew
pushed a commit
that referenced
this pull request
Oct 13, 2025
When running "perf mem record" command on CWF, the below KASAN global-out-of-bounds warning is seen. 196.273657] ================================================================== [ 196.273662] BUG: KASAN: global-out-of-bounds in cmt_latency_data+0x176/0x1b0 [ 196.273669] Read of size 4 at addr ffffffffb721d000 by task dtlb/9850 [ 196.273676] CPU: 126 UID: 0 PID: 9850 Comm: dtlb Kdump: loaded Not tainted 6.17.0-rc3-2025-08-29-intel-next-34160-g316938187eb0 #1 PREEMPT(none) [ 196.273680] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.IPC.3544.P83.2507110208 07/11/2025 [ 196.273682] Call Trace: [ 196.273683] <NMI> [ 196.273684] dump_stack_lvl+0x55/0x70 [ 196.273689] print_address_description.constprop.0+0x2c/0x3d0 [ 196.273694] ? cmt_latency_data+0x176/0x1b0 [ 196.273696] print_report+0xb4/0x270 [ 196.273699] ? kasan_addr_to_slab+0xd/0xa0 [ 196.273702] kasan_report+0xb8/0xf0 [ 196.273705] ? cmt_latency_data+0x176/0x1b0 [ 196.273707] cmt_latency_data+0x176/0x1b0 [ 196.273710] setup_arch_pebs_sample_data+0xf49/0x2560 [ 196.273713] intel_pmu_drain_arch_pebs+0x577/0xb00 [ 196.273716] ? __pfx_intel_pmu_drain_arch_pebs+0x10/0x10 [ 196.273719] ? perf_output_begin+0x3e4/0xa10 [ 196.273724] ? intel_pmu_drain_bts_buffer+0xc2/0x6a0 [ 196.273727] ? __pfx_intel_pmu_drain_bts_buffer+0x10/0x10 [ 196.273730] handle_pmi_common+0x6c4/0xc80 [ 196.273734] ? __pfx_handle_pmi_common+0x10/0x10 [ 196.273738] ? intel_bts_interrupt+0xd3/0x4d0 [ 196.273740] ? __pfx_intel_bts_interrupt+0x10/0x10 [ 196.273742] ? intel_pmu_lbr_enable_all+0x25/0x150 [ 196.273745] intel_pmu_handle_irq+0x388/0x700 [ 196.273748] perf_event_nmi_handler+0xff/0x150 [ 196.273751] nmi_handle.part.0+0xa8/0x2d0 [ 196.273755] ? perf_output_begin+0x3e9/0xa10 [ 196.273757] default_do_nmi+0x79/0x1a0 [ 196.273760] fred_exc_nmi+0x40/0x90 [ 196.273762] asm_fred_entrypoint_kernel+0x45/0x60 [ 196.273765] RIP: 0010:perf_output_begin+0x3e9/0xa10 [ 196.273768] Code: 54 24 1c 85 d2 0f 85 19 03 00 00 48 8b 44 24 18 48 c1 e8 03 42 0f b6 04 28 84 c0 74 08 3c 03 0f 8e 25 05 00 00 41 8b 44 24 18 <c1> e0 0c 48 98 48 83 e8 01 80 7c 24 2a 00 0f 85 f9 02 00 00 4c 29 [ 196.273770] RSP: 0018:ffffc9001cf575e8 EFLAGS: 00000246 [ 196.273774] RAX: 0000000000000080 RBX: ffff88c1a0f95028 RCX: 0000000000000004 [ 196.273775] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88c08c8f9408 [ 196.273777] RBP: 0000000000000028 R08: 0000000000000000 R09: ffffed18341f2a05 [ 196.273778] R10: ffff88c1a0f9502f R11: ffff88c1a0dbe1b8 R12: ffff88c1a0f95000 [ 196.273779] R13: dffffc0000000000 R14: 0000000000000000 R15: ffffc9001cf577e0 [ 196.273782] </NMI> The issue is caused by below code in __grt_latency_data(). The code tries to access x86_hybrid_pmu structure which doesn't exist on non-hybrid platform like CWF. WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big) So add is_hybrid() check before calling this WARN_ON_ONCE to fix the global-out-of-bounds access issue. Reported-by: Xudong Hao <xudong.hao@intel.com> Fixes: 0902624 ("perf/x86/intel: Rename model-specific pebs_latency_data functions") Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
24 commits from maxim-serdes v7 https://lore.kernel.org/linux-media/20250718152500.2656391-1-demonsingur@gmail.com/
4b95f00 media: mc: Add INTERNAL pad flag
23256c9 dt-bindings: media: i2c: max96717: add myself as maintainer
1e7931d dt-bindings: media: i2c: max96717: add support for I2C ATR
538264c dt-bindings: media: i2c: max96717: add support for pinctrl/pinconf
2c424dd dt-bindings: media: i2c: max96717: add support for MAX9295A
b524b8c dt-bindings: media: i2c: max96717: add support for MAX96793
552c2e2 dt-bindings: media: i2c: max96712: add myself as maintainer
f3ce16b dt-bindings: media: i2c: max96712: use pattern properties for ports
ede7955 dt-bindings: media: i2c: max96712: add support for I2C ATR
c0214d9 dt-bindings: media: i2c: max96712: add support for POC supplies
c5fe90e dt-bindings: media: i2c: max96714: add myself as maintainer
9169e80 dt-bindings: media: i2c: max96714: add support for MAX96714R
0c28fa2 dt-bindings: media: i2c: add MAX9296A, MAX96716A, MAX96792A
5a42e04 media: i2c: add Maxim GMSL2/3 serializer and deserializer framework
e6ef546 media: i2c: add Maxim GMSL2/3 serializer framework
4d0acea media: i2c: add Maxim GMSL2/3 deserializer framework
b8d2825 media: i2c: maxim-serdes: add MAX96717 driver
2091f64 media: i2c: maxim-serdes: add MAX96724 driver
df843b0 media: i2c: maxim-serdes: add MAX9296A driver
82897f5 arm64: defconfig: disable deprecated MAX96712 driver
fc881ef staging: media: remove MAX96712 driver
73c755d media: i2c: remove MAX96717 driver
0ba0bc3 media: i2c: remove MAX96714 driver
9 commits from https://lore.kernel.org/lkml/20250306-fpc202-v9-0-2779af6780f6@bootlin.com/
b756517 media: i2c: ds90ub960: Replace aliased clients list with address list
b9fd358 media: i2c: ds90ub960: Protect alias_use_mask with a mutex
b099955 i2c: use client addresses directly in ATR interface
01f301d i2c: move ATR alias pool to a separate struct
e113e13 i2c: rename field 'alias_list' of struct i2c_atr_chan to 'alias_pairs'
bf4f401 i2c: support per-channel ATR alias pools
2d35370 i2c: Support dynamic address translation
4e5ede5 i2c: atr: Fix end of loop test in i2c_atr_find_mapping_by_addr()
9 commits from https://lore.kernel.org/lkml/20250228151730.1874916-1-demonsingur@gmail.com/
5cb2e3e i2c: atr: Fix lockdep for nested ATRs
46e3c4e i2c: atr: find_mapping() -> get_mapping()
7df7cb9 i2c: atr: split up i2c_atr_get_mapping_by_addr()
7997542 i2c: atr: do not create mapping in detach_addr()
fa3282e i2c: atr: deduplicate logic in attach_addr()
26c402a i2c: atr: allow replacing mappings in attach_addr()
f09645b i2c: atr: add static flag
84882ec i2c: atr: add passthrough flag
Need @khaiwenng input on origin
67f2bdb i2c: use inclusive callbacks in struct i2c_algorithm
9ce0ab4 regmap: provide regmap_assign_bits()
9a329a7 media: v4l: Support passing media pad argument to v4l2_get_link_freq()
67f7e85 media: v4l: Support obtaining link frequency via get_mbus_config
d594cd6 gpiolib: make value setters have return values
fe8b509 gpiolib: wrap gpio_chip::set()
ba1a342 gpiolib: rework the wrapper around gpio_chip::set_multiple()
686f4ad gpiolib: introduce gpio_chip setters that return values
2ebfd57 maxim_serdes: Fix backport compile error on namespace
new ECG commits
cdc052f media: i2c: add ACPI_ID for isx031
981a2e5 media: i2c: add ACPI ID for max9296a
fa93a7f media: i2c: add ACPI ID for max9295a
ace7e94 media: i2c: isx031: add fwnode support
7da3646 acpi: mipi disco: Add logging
3ff1d76 media: i2c: isx031: initialize v4l2 subdev state
dd8da51 media: v4l2_async: skip unbind if no subdev available
06df8fb media: v4l2_async: Print out pending sub devices
8a10321 media: v4l2-subdev: Check secondary fwnode
737755a i2c: atr: Add fwnode handling
4a88839 i2c: i2c-mux: Set adapter parent to own device
256ed48 i2c: add identifier for ATR and MUX adapters
bbe90b8 i2c: i2c-core-acpi: clear dependency for MUX or ATR adapters
fb7aff6 media: i2c: maxim-serdes: max96717: add acpi condition for pintrl_ops
5767ae5 i2c: i2c-atr: Get adapter id from fwnode
9579d6b i2c: i2c-core-base: create static numbered adapter for ACPI devices
01222a4 media: i2c: maxim-serdes: max_ser: retrieve MUX adapter ID for serializer
bdc184d media: i2c: maxim-serdes: max_des: Add conditional checking for multi streaming
23fd170 media: i2c: maxim-serdes: max9296a: move use_atr to ops
a9c4a5b media: i2c: maxim-serdes: max9296a: update register
ef825d4 media: i2c: maxim-serdes: max9296a: update phy and stream
6cfa8ee media: i2c: maxim-serdes: max_ser: retrieve i2c-gate from fwnode
604d079 media: i2c: isx031: remove field
6880c9f media: pci: intel: ipu6-isys-csi2: get link frequency from pad