dasbob

WARNING: This firmware is for an old prototype version (v0.1) of DASBOB and may not be suitable for more current versions! Use at your own risk!

DASBOB is a 36-key diodeless split with splay and buzzer.

• Keyboard Maintainer: grooovebob
• Hardware Supported: rp2040
• Hardware Availability: https://github.com/GroooveBob/DASBOB

Make example for this keyboard (after setting up your build environment):

make dasbob:default

Flashing example for this keyboard:

make dasbob:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Keycode in layout: Press the key mapped to RESET if it is available