RPiMorse

A python program to convert standard input to morse code, printing to console (all) or flashing an LED via GPIO Pins (Pin 11). Run morse.py to get a universal Morse Code translator on console for any device with Python,or run rpi.py if you have a Raspberry Pi with an LED circuit for more real world translations!

Update: RPiMorse now takes user input for any GPIO pin to use!

Video Demonstration

Global Requirments:

Python Version 2 or higher

For Pi Version:

Raspberry Pi with GPIO Pins
An LED
A 100 Ω Resistor
A Breadboard
3+ Jumper Wires (More for Stablity)

Setup

RPiMorse uses the following translations to convert regular input to Morse Code.
For the LED Version, construct the following circuit:

After assembling the circuit, run rpi.py and input 11 for GPIO pin to get it running!

Documentation for Pi Version:

For testing purposes, if your python version is 3 or higher, please run the program rpi3.py. If your version is lower, run rpi2.py.

Or just run rpi.py for guranteed console functionality (chooses version for you, even with no Pi!).

Documentation for Console Versions:

For testing purposes, if your python version is 3 or higher, please run the program morse3.py. If your version is lower, run morse2.py.

Or just run morse.py for guranteed console functionality (chooses version for you!).