How to store your eurorack cables on a microphone stand. Just remove the clamp, install the stand and tighten it with the clamp.
Show you the project with the lasercutted poplar plywood 5 mm thickness
Here the first version
After some time in use, I realized that the support could accommodate more cable.
But adding grooves makes the bracket more flexible, so I opted for a larger diameter with fewer grooves, as this adds rigidity.
I also added some logos, because I like Saturn :) and for fun I added the length of the cables on either side of the grooves.
Here the second version
The pictures of version 1 in situation
Here the version 2 in situation
You could find here 3 differents formats.
Freecad .fcstd
Inkscape .svg
Autocad .dxf
At the beginning i would 3D print this project, i use freecad to draw the project. but, i realise that is will be a long and large print.
A long print mean more 10h...
A large print depending of your printer size, and the quality of your heating bed (to prevent warping)
So i decide to lasercut the project, so i export from freecad the .svg file, because a laser cutter need vectoriel.
I also export a .dxf file because sometime some laser cutter prefer this format.