Medium Size Open Source 3D Printer
- printing volume: 500x480x470mm Y-X-Z
- extruter: E3D Titan Aero 24V with direct drive
- filament: 2.85mm
- building platform: 6mm aluminum plate
- bed heaters: 4 x 200W silicon AC heaters
- actuators: 10mm GT2 Belt for X and Y, 16mm leadscrew
- motors: Y Nema 24 4Nm, X Nema 23 1.26 Nm, Z, Nema 23 1.26Nm
- linear guides: Hiwin HGR15 15mm
- frame: bosch aluminum profiles and custom parts from 12mm flat aluminum
- housing: aluminum composite and acrylic
- inductive Z min endstop
- autoleveling with inductive probe
Project Lead:
Prof. Dr. William Megill
Prof. Dr. Karsten Nebe
Machine design and fabrication:
Daniele Ingrassia
Technical help and assembly:
Kevin Brinkmann
Rhine-Waal University of Applied Sciences
https://www.hochschule-rhein-waal.de/en
MidFDM and all the work in this repository is released under the following open source license:
CERN Open Hardware Licence - Weakly Reciprocal, CERN-OHL-W