Added MacroBed

hackpads/MacroBed/firmware/main.py

@@ -0,0 +1,81 @@
+# Note: Currently the firmware is only for testing the hardware. Pins should be correct
+import board
+import busio
+
+from kmk.kmk_keyboard import KMKKeyboard
+from kmk.keys import KC
+from kmk.scanners import DiodeOrientation
+
+from kmk.extensions.display import Display, TextEntry, ImageEntry
+from kmk.extensions.display.ssd1306 import SSD1306
+from kmk.extensions.RGB import RGB
+
+from kmk.modules.encoder import EncoderHandler
+
+
+# Inits
+keyboard = KMKKeyboard()
+
+
+# Modules
+encoder_handler = EncoderHandler()
+
+keyboard.modules = [encoder_handler]
+
+
+# Extension - RGB
+rgb = RGB(pixel_pin=board.GP46, num_pixels=12)
+keyboard.extensions.append(rgb)
+
+
+# Extension - Display
+driver = SSD1306(
+    i2c=busio.I2C(board.GP9, board.GP7),
+)
+
+display = Display(
+    # Mandatory:
+    display=driver,
+    # Optional:
+    width=128,  # screen size
+    height=32,  # screen size
+    flip=False,  # flips your display content
+    flip_left=False,  # flips your display content on left side split
+    flip_right=False,  # flips your display content on right side split
+    brightness=1,  # initial screen brightness level
+    dim_target=1,  # set level for brightness decrease
+)
+
+display.entries = [
+    TextEntry(text="Hey!", x=0, y=0),
+]
+
+keyboard.extensions.append(display)
+
+
+# Matrix config
+keyboard.col_pins = (board.GP14, board.GP13, board.GP12)
+keyboard.row_pins = (board.GP18, board.GP17, board.GP16, board.GP15)
+keyboard.diode_orientation = DiodeOrientation.COL2ROW
+
+
+# Encoder config
+encoder_handler.pins = ((board.GP5, board.GP4, board.GP3, False),)
+
+
+# Keymap (for testing only)
+keyboard.keymap = [
+    [KC.A, KC.B, KC.C],
+    [KC.D, KC.E, KC.F],
+    [KC.G, KC.H, KC.I],
+    [KC.J, KC.K, KC.L],
+]
+
+encoder_handler.map = [
+    ((KC.UP, KC.DOWN, KC.MUTE),),
+]
+
+
+# Loop
+if __name__ == "__main__":
+    keyboard.go()