MOKETA is an open-source unibody 42-key wireless keyboard with MX switches, per-key LEDs, status indicators, a 3D-printed box-mount case, and a hot-swappable Pro Micro–compatible controller.
- Unibody form factor with a 15 degree angle between halves
- 42-key column-staggered layout with MX switches
- 3D-printed box mount case
- 4 status LEDs inspired by the Aroum project
- Per-switch SK6812MINI-E LEDs
- Pro Micro compatible microcontroller with hot-swap (nice!nano, SuperMini NRF52840, Mikoto, or another)
- Optimized for wireless use: hardware power switch, reset button, battery solder pads, and ZMK firmware
| Component | Qty/Pin |
|---|---|
| Pro Micro board: Super Mini nRF52840 / nice!nano | 1 |
| MSK12C02 Slide Switch | 1 |
| TS342A2P | 1 |
| 50mm Industrial H62 brass wire 0.5mm thickness | 1 |
| 0805 Led | 4 |
| 0805 Resitor | 4 |
| Silicone bumpers | 6 |
| Machine Pin Header Female | 24 |
| PG1511 hot-swap socket | 42 |
| Diode 1N4148W (SOD-123) | 42 |
| MX switches | 42 |
| SK6812MINI-E | 42 |
| Silicone (Optional) |