中文Readme

!! ALERT

BBR v3 is currently unavailable

Seedbox Installation Script

Usage

bash <(wget -qO- https://raw.githubusercontent.com/jerry048/Dedicated-Seedbox/main/Install.sh) -u <username> -p <password> -c <Cache Size(unit:MiB)> -q <qBittorrent Version> -l <libtorrent Version> -b -v -r -3 -x -o

Options

1. -u: username 
2. -p: password
3. -c: Cache size for torrent client
4. -q: qBittorrent versions
5. -l: libtorrent versions
6. -b: Install autobrr
7. -v: Install vertex
8. -r: Install autoremove-torrents
9. -3: Enable BBR V3
10.-x: Enable BBRx
11. Customize ports

Example

bash <(wget -qO- https://raw.githubusercontent.com/jerry048/Dedicated-Seedbox/main/Install.sh) -u jerry048 -p 1LDw39VOgors -c 3072 -q 4.3.9 -l v1.2.19 -b -r -x

Explanation

1. username is jerry048
2. password is 1LDw39VOgors 
3. Cache size is 3GB
4. Install qBittorrent 4.3.9 - libtorrent-v1.2.19
5. Install autobrr
6. Install autoremove-torrents
7. Enable BBRx

Supported Platform

1. OS
	1. Debian 10+
	2. Ubuntu 20.04+

2. CPU Architecture
	1. x86_64
	2. ARM64

Functions

1. Seedbox Environment

1. qBittorrent
2. autobrr
3. vertex
4. autoremove-torrents

2. System Tunning

CPU Optimization
Network Optimization
Kernel Values
Drive Optimization
BBRv3 or BBRx

Fine Tunning Note

• The Cache size should be set to around 1/4 of the machine total available ram. In case you opt for qBittorrent 4.3.x, you need to take account into memory leakage and set it to 1/8.

• aio_threads default setting is 4 and should be good for HDD. For SSD or even NVMe server, you might consider increase it to 8 or even 16.

  • For qBittorrent 4.3.x - 4.6.x you can change it in the advance setting tab.
  • For qBittorrent 4.1.x, you can set it in /home/$username/.config/qBittorrent/qBittorrent.conf by adding Session\AsyncIOThreadsCount=8 under [BitTorrent] section
    • Please shut down qBittorrent before the editing
  • For Deluge, you can install ltconfig and edit through the plugins
    • aio_threads=8

• send_buffer_low_watermark, send_buffer_watermark & send_buffer_watermark_factor can be set to a lower value if you are running on a machine with poor I/O.

  • For qBittorrent 4.3.x you can change it in the advance setting tab.
  • For qBittorrent 4.1.x, you can set it in /home/$username/.config/qBittorrent/qBittorrent.conf by adding Session\SendBufferWatermark=5120,Session\SendBufferLowWatermark=1024andSession\SendBufferWatermarkFactor=150 under [BitTorrent] section
    • Please shut down qBittorrent before the editing
  • For Deluge, you can install ltconfig and edit through the plugins
    • send_buffer_low_watermark=1048576
    • send_buffer_watermark=5242880
    • send_buffer_watermark_factor=150

• tick_internal default setting is 100 which can be too high for some weaker CPU. Consider changing it to 250 or 500.

  • Sadly there is no way to change this setting in qBittorrent
  • For Deluge, you can install ltconfig and edit through the plugins
    • tick_interval=250

• A little bit more fine tunning notes can also be found in /etc/sysctl.conf

• For file system, I highly recommend using XFS

Credit

qBittorrent Install - https://github.com/userdocs/qbittorrent-nox-static

qBittorrent Password Set - https://github.com/KozakaiAya/libqbpasswd & https://amefs.net/archives/2027.html

Deluge Password Set - https://github.com/amefs/quickbox-lite

autoremove-torrents - https://github.com/jerrymakesjelly/autoremove-torrents

BBR Install - https://github.com/KozakaiAya/TCP_BBR