Dreo Heater ESPHome Component

This is an external component for ESPHome to control Dreo wall heaters using ESPHome custom firmware. It is designed for BK72xx devices such as the BK7231N Tuya platform.

Features

• Full thermostat/climate integration
• Control sound, display, child lock, window mode
• Manual heat level and timer support
• Temperature calibration

Structure

• dreo_heater/ — ESPHome component code (Python + C++)
• example.yaml — Example ESPHome config for your heater

Installation (as External Component)

Add to your ESPHome YAML:

external_components:
  - source:
      type: git
      url: https://github.com/lygris/dreo_heater
    refresh: 0s
    components: [dreo_heater]  

Then use the climate platform in your config (see example.yaml).

Example YAML

See example.yaml or below:

# ... platform and WiFi setup ...
external_components:
  - source:
      type: git
      url: https://github.com/lygris/dreo_heater.git
    refresh: 0s

uart:
  id: tuya_uart
  tx_pin: TX1
  rx_pin: RX1
  baud_rate: 115200

climate:
  - platform: dreo_heater
    id: my_dreo
    uart_id: tuya_uart
    name: "Dreo Heater"

# ... more options ...

Usage

• Many advanced options—such as sound, display, child lock, window detection, heat level, timer, and calibration—are available and shown in the example.yaml. Consult this file to see all configurable switches and features you can add to your configuration.
• See comments in example.yaml for additional tips on customizing these options.
• Use with devices using BK7231N chips (Tuya-based Dreo wall heaters, etc)

Contributing

PRs welcome! Open an issue or pull request if you improve compatibility or add features.

License

MIT (add this if you want to specify one)