printables

TeleDex Assembly Guide

Overview

• Phone-only mode streams the device pose and works without holder.
• The optional holder adds finger tracking using a simple strap-based fixture.

Quick Start

3D-Printed Parts

Print phone holder components (see the STL files in printables folder).

• phone_mount_XXX.stl (multiple versions available for different iPhones, coming soon)
• link.stl
• wrist_mount.stl
• wrist-adapter_XXX.stl (multiple versions available for different wrist sizes, coming soon)

Off‑the‑Shelf Items

• Double‑sided self-gripping strips, e.g. external link to Amazon.
• M3 (25mm length) and M5 (40mm length) screws and nuts.
• Soft foam, rubber pad, or wrist sweatband (optional, for comfort and better fit).

Assembly Steps

1. 3D-print parts.
2. Assemble all parts as shown above; insert M3/M5 screws and tighten them.
3. Route the velcro strap; add foam pad if needed.
4. Mount phone; keep cameras/sensors unobstructed.

Next Steps

• See GUIDE.md to get started with the software.
• Refer to the main README.md for usage examples and API.