3D Printable Case for the LPS Node

Overview

Files:
- Front.stl
  - Front shell of the enclosure (contains hole for the UWB)
- Back.stl
  - Back shell of the enclosure (holds the LPS node PCB)
- Adapter.stl
  - Adapter for mounting
Parts List: See the full parts list here

Design by: albrecht.mx

These files may be freely printed.

Tested:

Adapter: (Layer Height: 0.1mm, Infill Density: 10%, Pattern: Grid, Material: PLA)


1) Place the LPS node PCB into the back part of the case. 2) Connect and solder the USB power cable wires. 3) Lay down the USB cable on top of the designated notch in the back part. 4) Attach the front part and secure it with screws. 5) Use the adapter to mount the case on a tripod.

Name		Name	Last commit message	Last commit date
Latest commit History 1 Commit
Adapter.stl		Adapter.stl
Back.stl		Back.stl
Front.stl		Front.stl
Parts-List.txt		Parts-List.txt
README.md		README.md
building-instructions.jpg		building-instructions.jpg