Qcom next #36
Closed
Qcom next #36
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
… with rgmii-id The Qualcomm board always chooses the MAC to provide the delay instead of the PHY, which is completely opposite to the suggestion of the Linux kernel. The usage of phy-mode in legacy DTS was also incorrect. Change the phy_mode passed from the DTS to the driver from PHY_INTERFACE_MODE_RGMII_ID to PHY_INTERFACE_MODE_RGMII to ensure correct operation and adherence to the definition. To address the ABI compatibility issue between the kernel and DTS caused by this change, handle the compatible string 'qcom,qcs404-evb-4000' in the code, as it is the only legacy board that mistakenly uses the 'rgmii' phy-mode. Link: https://lore.kernel.org/all/20250121-dts_qcs615-v3-2-fa4496950d8a@quicinc.com/ Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Add documentation detailing the capability for tuning the RX sampling occasion of the Qualcomm MAC. Introduce a new flag to indicate that a board requires switching the timing of signal sampling, instead of relying solely on the EMAC version in the driver code. For older DTS, the logic for current boards is hard-coded in the driver code to ensure they function as previously. Link: https://lore.kernel.org/all/20241225-support_10m100m-v1-1-4b52ef48b488@quicinc.com/ Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
…s615 The sampling timing of the MAC varies per board due to differences in hardware layout or peer PHY, even within the same version. For instance, the EMAC version on the qcs615-ride board is below 3, but it requires swapping the RX timing to enable 10M/100M speeds. Therefore, this setting should be adjustable rather than solely determined by the version. The RGMII_CONFIG2_RX_PROG_SWAP bit is used to switch the RX sampling timing between the rising edge and the falling edge of the clock. Consequently, the condition for setting this bit should be revised to ensure correct data sampling. The compatible string matching for 'qcom,sa8540p-ride' in this change is intended to ensure ABI compatibility for DTS files that do not include the new 'qcom,rx-prog-swap' property, allowing legacy boards to function as before. This board is the only one among legacy boards using RGMII and needs to enable RX swap. Link: https://lore.kernel.org/all/20241225-support_10m100m-v1-2-4b52ef48b488@quicinc.com/ Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
sgaud-quic
pushed a commit
that referenced
this pull request
Sep 2, 2025
After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfree+0xcf/0x350 [ 21.673700] input_dev_release+0xab/0xd0 [ 21.673700] device_release+0x9f/0x220 [ 21.673700] kobject_put+0x12b/0x220 [ 21.673700] put_device+0x12/0x20 [ 21.673700] input_free_device+0x4c/0xb0 [ 21.673700] hidinput_connect+0x1862/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] Fixes: 9ce12d8 ("HID: asus: Add i2c touchpad support") Cc: stable@vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250810181041.44874-1-qasdev00@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.