VL53L0X

Arduino library to support the VL53L0X Time-of-Flight and gesture-detection sensor

API

This sensor uses I2C to communicate. And I2C instance is required to access to the sensor.

The API provides simple distance measure, single swipe gesture detection, directional (left/right) swipe gesture detection and single tap gesture detection.

Examples

There are 3 examples with the VL53L0X library.

• DISCO_IOT_DataLogTerminal: This example code is to show how to get proximity values of the onboard VL53L0X sensor

• DISCO_IOT_Gesture_Swipe1: This example code is to show how to combine the proximity value of the onboard VL53L0X sensor together with the gesture library in order to detect a simple swipe gesture without considering the direction.

• DISCO_IOT_Gesture_Tap1: This example code is to show how to combine the proximity value of the onboard VL53L0X sensor together with the gesture library in order to detect a simple tap gesture.

Dependencies

The VL53L0X library requires the following STM32duino library:

• STM32duino Proximity_Gesture: https://github.com/stm32duino/Proximity_Gesture

Note

The maximum detection distance is influenced by the color of the target and the indoor or outdoor situation due to absence or presence of external infrared. The detection range can be comprise between ~40cm and ~120cm. (see chapter 5 of the VL53L0X datasheet). If you need an higher accuracy (up to +200cm), you should implement your own function.

Documentation

You can find the source files at
https://github.com/stm32duino/VL53L0X

The VL53L0X datasheet is available at
http://www.st.com/content/st_com/en/products/imaging-and-photonics-solutions/proximity-sensors/vl53l0x.html