NAMIZUN

This project is used to remove the limitation of asymmetric ratio for uploading and downloading Iranian servers

Installation

• 1) you need to install pip, redis & git:

sudo apt install python3-pip redis git -y

• 2) you need to create a directory to clone the project :

mkdir /var/www/namizun && cd /var/www/namizun

• 3) Clone the project with Git:

git init

git remote add origin https://github.com/malkemit/namizun.git

git pull origin master

• 4) Install the project requirements with pip:

pip install -r requirements.txt

• 5) Create service for core.py (for running namizun script):

sudo nano /etc/systemd/system/namizun.service

• 6) Copy these lines and paste it in the nano editor and save and exit by pressing the ctrl+o and ctrl+x:

[Unit]
Description=Namizun service,Asymmetric upload and download

[Service]
Restart=always
ExecStart=/usr/bin/python3 /var/www/namizun/core.py

[Install]
WantedBy=multi-user.target

• 7) Reload the service files to include the new service:

sudo systemctl daemon-reload

• 8) To enable your service on every reboot:

sudo systemctl enable namizun.service

• 9) Start namizun service:

sudo systemctl start namizun.service

Configuration

• You can use menu.py tool to configure monitoring. Type the following command to run it:

python3 /var/www/namizun/menu.py

• Note: Applying changes until the end of the uploader cycle does not affect.
  In fact, after the end of a round of the uploader cycle, the new configurations will have an effect.
  If you want the recorded event to take effect quickly, you can reload the core.py with the following command:

sudo systemctl restart namizun.service

Command list

• 1) Uploader Running : You can activate or deactivate the uploader by entering the number 1\

• 2) Speed: By entering the number 2, you can specify the speed of the uploader.(max = 5 normal = 3 min = 1)
  Note: that the higher the number, the higher the CPU consumption and the sending of larger buffers, and the possibility of being speed limited by the provider.

• 3) Coefficient: By entering the number 3, you can enter the limit announced by the provider.
  For example, if your ratio should be 10 uploads to 1 download, set the number to 1

  Important: Your upload and download information will be counted from your last reboot.
  In fact, as soon as you reboot the server, the amount of downloads and uploads in the program will be zero, and you must manually enter the amount of uploads and downloads you have had so far.

• 4) Total Upload Before Reboot: By entering the number 4, you can change your upload amount (use the graphs inside the provider panel and enter the correct amount)\

• 5) Total Download Before Reboot: By entering the number 4, you can change your download amount

• 0) Exit: goodbye!

Donate:

If you enjoyed this script you could donate me by donating!
Your support allows me to continue my work, fight against Internet censorship in Iran

USDT (TRC20) : TDuBY7FpRkaMU1rhQjQa6sqpNdKhmM8Nx3
Dash : XeCZbBwgoZpZi3RzqkbELvLVTaUCJY67ZL