To easily work with human-readable engineering notation. I wrote this as a quick tool for my own use. I found that I was writing the same functionality into multiple packages and would like a quick pip-installable package to take care of this manipulation for me. The package should be easily extended for other use cases. The package is unit-less, so only operates on numeric values. Unit detection may be added in future versions.
More information may be found at for(embed).
Install using pip: pip install engineering_notation.
There are multiple ways of initializing a number to a particular value, but a string is the preferred method:
>>> from engineering_notation import EngNumber
>>> EngNumber('10k')
10k
>>> EngNumber('10000')
10k
>>> EngNumber(10000)
10k
>>> EngNumber(10000.0)
10k
>>> EngNumber(1e4)
10k
Where decimals are involved, we use a default precision of 2 digits:
>>> EngNumber('4.99k')
4.99k
>>> EngNumber('4.9k')
4.90k
This behavior can truncate your results in some cases, and cause your number to round. To specify more or less digits, simply specify the precision in the declaration:
>>> EngNumber('4.999k')
5k
>>> EngNumber('4.999k', precision=3)
4.999k
Most operations that you would perform on numeric values are valid, although all operations are not implemented:
>>> EngNumber('2.2k') * 2
4.40k
>>> 2 * EngNumber('2.2k')
4.40k
>>> EngNumber(1.2) > EngNumber('3.3k')
False
>>> EngNumber(1.2) <= EngNumber('3.3k')
True
>>> EngNumber('3.3k') == EngNumber(3300)
True
All of the above operations are also possible on the EngUnit() class as well. The only difference is
that units must match for addition/subtraction/comparison operations. Although multiplication and division
operations will work numerically, they may not always be strictly correct. This is because EngUnit is not
intended to replace a computer algebra system!
>>> EngUnit('2s') / EngUnit('4rotations')
0.5s/rotations
Additionally, since there are 'reserved' letters for sizing the number, you must be careful with your units!
>>> EngUnit('2mm')
2mm # <<< this value equivalent to "0.002m"
>>> EngUnit('2meter')
2meter # <<< this value is equivalent to "0.002eter", the "m" was used to scale the unit!
>>> EngUnit('2', unit='meter') # <<< this will work better
Contributions are welcome. Feel free to make feature requests in the issues.
If you are developing, you probably want to perform a local editable installation:
uv run pip install -e .uv run python -m pytest
