Added EL10, bug fixes

[HonestLocksmith]

No description provided.

[zinongli]

Hi! There are some problems with the double sided car keys.

Do you know where the angular lines on the right side of the screen come from?

And, to answer your previous question about where I got the .clearance values. I get those by testing each format myself. The clearance value is the maximum sum of two neighboring pin's depth value such that their diagonal cut lines won't intersect each other.

Let's look at some examples

1. Clearance too large:

You can see here pin 1 and pin 2 sums to 6 (3 and 3 in respect to 0). Their diagonal cuts intersect and shouldn't be drawn as it's physically impossible to appear on a real key. So what value of clearance should we use?

By looking at this combination, 2 and 2 equal 4. This is where the two diagonal lines just starts to intersect each other. So our clearance should be 4.

See here after adjusting the clearance to be 4, the two lines won't keep going after they intersect.

2. Clearance too small

Here, the lines aren't intersecting each other yet. But because clerance is too small, the app "thinks" the two lines should be connected at this sum of neighboring depths. So it drags the two diagonal lines to be together. And it results in unwanted angles.

For every format I always manually check the clearance before commiting them to the repo. If you can do that before making the PR it would be nice. But if you don't wanna bother that's fine. I check them before merging PRs anyway.

[HonestLocksmith]

The extra line is an artifact from the elbow inch length that must match the first pin inch for tip stopped keys. I'll have to see what i can do about it. Thanks for clarifying the clearance issue as well.

[Tuyeee]

Hello
When will this version with EL10 finally be available?